General
Model / MPN
RPW2E
Product Line
Baxter RPW Retarder/Proofer — E Series
Installation Type
Floor Model
Control Type
Digital
Power Source
Electric
Material
Stainless Steel
Product Width
62 in
Depth (front to back)
43.3 in
Product Height
99.5 in
Water / Drain Connection
1/2" NPT
Product Certifications
cULus, UL EPH
Feature Tags
Made in America, Insulated, Stainless Interior, Controlled Humidity, Digital Temperature Controller, Timer, Assembly Required, Programmable
Warranty - Parts
1 Year
Warranty - Labour
1 Year
Additional Specifications
Overall Height
99.5" standard (matches rack oven); 94.0" with low profile front trim option
Net Door Opening
74.5" H x 51.0" W (all depths)
Maximum Rack Height
74
Typical Rack Footprints
Single end load 20.38" W x 26.0" D; single side load 28.38" W x 18.0" D; double side load 28.38" W x 36.0" D
Freight Class
85
Shipping Condition
Field assembled, shipped knocked down; 40.5" D may be shipped assembled
Air Flow System
Patented air flow system; two 6" fans in a dual circular pattern (selection guide)
Heat & Humidity System
Internally mounted, easy access, no flushing required; flash spray onto heated plate (selection guide)
Controls
Eye-level digital control panel in the door; sets heat and humidity; sets retarding temperature; four independent timers
Construction
Stainless steel interior and exterior; modular panels with cam lock attachment; foam insulation and gaskets; nonmetallic interior bumpers
Floor
Open floor, no ramp required
Water Supply
1/2" FNPT cold water, 30-80 psi, at 85" AFF
Water Quality
Required hardness 2-4 grains/gal, pH 7.0-8.0, chloride 0-30 ppm
Drain
1/2" FNPT, front or rear, at 5" AFF; route to air-gap drain
Power Connection Height
85" AFF
Control Voltage
Neutral required to provide 110-120V for control components (or separate line / transformer)
Floor Level Requirement
Level within 1/8" per foot; slope not to exceed 3/4" in any direction; corrosion-resistant cleanable surface without floor option
Utility Routing
Do not route utilities in or under the non-combustible floor beneath the unit
Gap to Oven
Minimum 1" air gap between proofer and oven recommended
Ceiling Height
10 ft recommended for airflow around condenser and service access
Optional Low Profile
Low profile, 94" overall height
Optional Floor
Stainless steel floor, no ramp required
Optional Interior Light
Interior light
Optional Prison Package
Prison package
Optional Upper Side Trim
Upper side trim, 1 or 2 sides
Airflow Spacing Recommendation
1-1/2" of airflow above product and between slides (selection guide)
Doors
Two doors hinged without a center jamb for full-width access; controls in one door
Refrigeration (Standard)
Configured for remote R448A refrigeration; evaporator(s) supplied, remote condensing unit by others
Refrigerant
R448A standard (remote); R407A remote optional; refrigerant type must be specified at time of order
Optional Self-Contained Refrigeration
Self-contained R448A, 6,000 BTU condenser, 40.5" D and 60.5" D only
Optional Remote R407A
Configured for remote R407A refrigeration
Refrigeration Sizing Basis
Frozen product, 90°F ambient, minimum 2 hours from proofing to retarding temperature
Condensing Unit Ambient
Maximum 100°F around ceiling-mounted condensing unit
Program Timer
Programmable 24-hour timer for one- or seven-day cycle
Interior Dimensions (40.5" D model)
37.8" D x 52.6" W x 74.5" H
Exterior Dimensions (40.5" D model)
43.3" D x 62.0" W x 99.5" H (94.0" H low profile)
Power Input with Neutral (40.5" D model)
208-240V/60/1/18-21A or 208-240V/60/3/18-21A
Heat Wattage (40.5" D model)
3.3-4.4
Water Flow Rate (40.5" D model)
0.5
Maximum Water Usage (40.5" D model)
1.0
Rack Capacity (40.5" D model)
2 single end-load or 3 single side-load racks, or 1 double side-load racks
Remote Refrigeration, Standard (40.5" D model)
1 evaporator supplied; 6,000 BTU/hr minimum remote condenser required
Self-Contained Refrigeration, Optional (40.5" D model)
6,000 BTU Condenser
Interior Dimensions (60.5" D model)
57.8" D x 52.6" W x 74.5" H
Exterior Dimensions (60.5" D model)
63.3" D x 62.0" W x 99.5" H (94.0" H low profile)
Power Input with Neutral (60.5" D model)
208-240V/60/1/37-41A or 208-240V/60/3/32-36A
Heat Wattage (60.5" D model)
6.6-8.8
Water Flow Rate (60.5" D model)
1.0
Maximum Water Usage (60.5" D model)
2.0
Rack Capacity (60.5" D model)
4 single end-load or 4 single side-load racks, or 2 double side-load racks
Remote Refrigeration, Standard (60.5" D model)
1 evaporator supplied; 6,000 BTU/hr minimum remote condenser required
Self-Contained Refrigeration, Optional (60.5" D model)
6,000 BTU Condenser
Interior Dimensions (80.5" D model)
77.8" D x 52.6" W x 74.5" H
Exterior Dimensions (80.5" D model)
83.3" D x 62.0" W x 99.5" H (94.0" H low profile)
Power Input with Neutral (80.5" D model)
208-240V/60/1/37-41A or 208-240V/60/3/32-36A
Heat Wattage (80.5" D model)
6.6-8.8
Water Flow Rate (80.5" D model)
1.0
Maximum Water Usage (80.5" D model)
2.0
Rack Capacity (80.5" D model)
5 single end-load or 6 single side-load racks, or 2 double side-load racks
Remote Refrigeration, Standard (80.5" D model)
2 evaporators supplied; 12,000 BTU/hr minimum remote condenser required
Self-Contained Refrigeration, Optional (80.5" D model)
Not available at this depth
Interior Dimensions (100.5" D model)
97.8" D x 52.6" W x 74.5" H
Exterior Dimensions (100.5" D model)
103.3" D x 62.0" W x 99.5" H (94.0" H low profile)
Power Input with Neutral (100.5" D model)
208-240V/60/1/37-41A or 208-240V/60/3/32-36A
Heat Wattage (100.5" D model)
6.6-8.8
Water Flow Rate (100.5" D model)
1.0
Maximum Water Usage (100.5" D model)
2.0
Rack Capacity (100.5" D model)
6 single end-load or 8 single side-load racks, or 3 double side-load racks
Remote Refrigeration, Standard (100.5" D model)
2 evaporators supplied; 12,000 BTU/hr minimum remote condenser required
Self-Contained Refrigeration, Optional (100.5" D model)
Not available at this depth
Interior Dimensions (120.5" D model)
117.8" D x 52.6" W x 74.5" H
Exterior Dimensions (120.5" D model)
123.3" D x 62.0" W x 99.5" H (94.0" H low profile)
Power Input with Neutral (120.5" D model)
208-240V/60/1/37-41A or 208-240V/60/3/32-36A
Heat Wattage (120.5" D model)
6.6-8.8
Water Flow Rate (120.5" D model)
1.0
Maximum Water Usage (120.5" D model)
2.0
Rack Capacity (120.5" D model)
8 single end-load or 10 single side-load racks, or 3 double side-load racks
Remote Refrigeration, Standard (120.5" D model)
2 evaporators supplied; 12,000 BTU/hr minimum remote condenser required
Self-Contained Refrigeration, Optional (120.5" D model)
Not available at this depth
Electrical
Amperage
21 A
Wattage
4.4 kW
Enclosure
Number of Doors
2
Refrigeration
Condenser Type
Remote
Compressor Location
Remote
Cooking
Chamber Width (left to right)
52.6 in
Chamber Depth (front to back)
37.8 in
Chamber Height
74.5 in
Shipping
Shipping Estimate
Usually ships in 1-2 Weeks