{"title":"Meat Prep","description":"\u003cp\u003eMeat prep equipment covers the machines a protein room runs all day: band saws for breaking down primals through bone, gravity and manual slicers for deli meats and charcuterie, grinders and mixers for burger and sausage programs, and the tenderizers and presses that finish portions. Butcher shops, delis and restaurants with an in-house butchery program buy here to control yield, hold portion weights and cut the hours a cook spends on breakdown. Motor size, blade length and throughput separate light-duty from production machines, so match the equipment to your daily volume and see \u003ca href=\"\/collections\/meat-slicers\"\u003ecommercial meat slicers\u003c\/a\u003e and \u003ca href=\"\/collections\/band-saws\"\u003emeat band saws\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"eurodib-hbs300l-12-inch-belt-drive-electric-meat-slicer-120v-250w","title":"Eurodib HBS300L 12-Inch Belt-Drive Meat Slicer, 6.25-Inch Cut Width — 120V, 250W","description":"\u003cp\u003eA 12-inch stainless blade turning on a belt drive, plugged into any wall outlet in the building. The HBS300L is the slicer for a deli case, a sandwich station or a prep table that runs roast beef, turkey and cured muscle every morning — 6.25 inches of maximum slicing width takes a whole eye of round or a full-size deli log without trimming it down first. The belt between the motor and the blade absorbs the shock of dense product, so the blade keeps its speed through a cold roast instead of bogging and tearing.\u003c\/p\u003e\u003cp\u003eThickness dials from 0.2 mm for shaved prosciutto up to 12 mm for thick-cut roast, and it holds that setting slice after slice, which is what keeps portion cost honest across a 52-pound case of product. The integrated sharpener lives on the machine, so a dull edge is a two-minute job at close instead of a service call — and a sharp blade is what gives you clean faces on tomato and cheese instead of shredded ones. Add the optional Teflon-coated blade when you are slicing cheese and product releases instead of gumming the edge. The body is anodized aluminum, the blade stainless, and the whole assembly comes apart by hand for washdown.\u003c\/p\u003e\u003cp\u003eGuarding is built for a working line: a clear Perspex hand guard over the blade and a waterproof emergency shut-off that survives a wet wipe-down. It draws 250 watts at 2.3 amps on 120V through a NEMA 5-15P plug, so it goes wherever there is a receptacle, no electrician involved. Net weight is 52 pounds on a footprint of 18 by 21.8 inches, 16.6 inches tall. ETL and cETL listed, conforming to Quebec CNESST safety standard EN 1974-2020, with a 1-year Eurodib warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48143174238366,"sku":"EUR-HBS300L","price":901.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS300L_HiResPicture_LeftView_CC_SH.png?v=1789707972"},{"product_id":"eurodib-hf130-manual-hamburger-press-5-mold-nsf-listed","title":"Eurodib HF130 Manual Hamburger Press — 5\" Mold, NSF Listed","description":"\u003cp\u003eA 5-inch mold is the size that fills a standard bun after the patty shrinks on the grill — press it any smaller and you serve a burger swimming in bread. Every pull gives the same diameter and the same thickness, which means cook times hold steady across a rush and your food cost per burger stops being an estimate.\u003c\/p\u003e\u003cp\u003eThe press takes any grind: beef, turkey, lamb, or plant-based formulations, without a second tool for the alternative patty. An integrated sheet holder feeds patty paper straight into the mold, so pressed burgers stack and freeze without welding themselves together — paper is available separately as HF130P. The body is compact and rounded with a rubber handle that stays under control with wet hands, and there is nothing to plug in, nothing to service and nothing to break.\u003c\/p\u003e\u003cp\u003eIt measures 11.75 inches square and is \u003cstrong\u003eNSF listed\u003c\/strong\u003e, with a 90-day warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48143457124510,"sku":"EUR-HF130","price":171.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HF130_HiResPicutre_RigthView.jpg?v=1789708258"},{"product_id":"eurodib-hf100-manual-hamburger-press-anodized-aluminum-body-stainless-mold","title":"Eurodib HF100 Manual Hamburger Press — Anodized Aluminum Body, Stainless Mold","description":"\u003cp\u003eAn anodized aluminum alloy body around a stainless steel mold: the aluminum keeps the press light enough to work one-handed through a hundred patties, and the stainless takes the food contact, the acid and the daily wash-down without pitting. Anodizing is what keeps the finish from chalking after a season on a hot line.\u003c\/p\u003e\u003cp\u003eEvery pull of the handle forms the same diameter and the same thickness, so cook times hold across a rush and the cost of a burger stops being an estimate. An integrated sheet holder feeds patty paper straight into the mold, so pressed patties stack and freeze without sticking to each other. The handle is rubber-gripped for control with wet hands, the body is compact and rounded with no corners to trap product, and there is nothing to plug in — it stores on a shelf between services. It stands 13.25 inches tall on an 8.75-inch base, is \u003cstrong\u003ecETL US listed by Intertek\u003c\/strong\u003e, and carries a 90-day warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48143458271390,"sku":"EUR-HF100","price":162.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HF100_HiResPicutre_LeftView.jpg?v=1789708266"},{"product_id":"eurodib-hm22a-electric-meat-grinder-gear-driven-plates-and-knife-110v-1-100w","title":"Eurodib HM22A Electric Meat Grinder, Gear Driven, Plates and Knife — 110V, 1,100W","description":"\u003cp\u003eEleven hundred watts of gear-driven torque, with the grinding plates and the star knife already in the box. The HM22A is the larger of Eurodib's two meat grinders, built for the shop or kitchen grinding in volume — a butcher case, a burger program, a sausage run, a taqueria going through chuck by the case rather than by the pound.\u003c\/p\u003e\u003cp\u003eGear drive is the reason it keeps pulling. A belt slips the moment the head packs with cold, sinewy trim; a direct gear train holds torque and keeps the auger turning through it, which is what separates a machine that grinds a case from one that stalls halfway. Materials are specified as \u003cstrong\u003eacid, salt and rust resistant\u003c\/strong\u003e — the corrosion that eats cheaper grinders comes from cures, brines and seasoned mixes sitting on the metal, not from water — and the emergency stop switch is waterproof, so wash-down does not turn a safety device into a failure point. When the run is done the head breaks down and the removable parts go through the dishwasher rather than into a sink of cold water and a wire brush.\u003c\/p\u003e\u003cp\u003ePlugs into 110V single-phase service at 1,100 watts and 10 amps — no dedicated circuit, no electrician. ETL listed to US standards and c-UL listed for Canada, with a one-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48143464562846,"sku":"EUR-HM22A","price":859.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HM22A_HiResPicture_1.jpg?v=1789708274"},{"product_id":"eurodib-hm12n-electric-meat-grinder-gear-driven-countertop-anodized-aluminum","title":"Eurodib HM12N Electric Meat Grinder, Gear Driven, Countertop — Anodized Aluminum","description":"\u003cp\u003eGear drive in a countertop body — the combination that lets a small kitchen grind its own without giving up a bench. The HM12N is the compact model in Eurodib's grinder line, sized for the restaurant making its own burger blend, the deli grinding to order, the caterer running sausage for a weekend rather than for a wholesale account.\u003c\/p\u003e\u003cp\u003eA direct gear train is what makes it worth owning. Belts slip the moment a head packs with cold, sinewy trim; gears hold torque and keep the auger turning through it, and there is no belt to stretch, glaze or replace on a service call. Construction is \u003cstrong\u003eanodized aluminum alloy and stainless steel\u003c\/strong\u003e, specified as acid, salt and rust resistant — the corrosion that kills grinders comes from cures, brines and seasoned mixes sitting on the metal after a run, not from water. The emergency stop switch is waterproof, so a daily wash-down does not slowly destroy the one control that has to work every time. At the end of the shift the head breaks down and the removable parts go through the dishwasher instead of into a sink with a wire brush. Controls are deliberately plain: a cook who has never used this machine can be running it in a minute.\u003c\/p\u003e\u003cp\u003eBuilt with a one-year warranty, CUL and cETL US listed.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48143466823838,"sku":"EUR-HM12N","price":618.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/HM-12N-1.jpg?v=1789708276"},{"product_id":"eurodib-hbs195js220-8-belt-drive-meat-slicer-6-25-slice-width-etl","title":"Eurodib HBS195JS220 8\" Belt-Drive Meat Slicer — 6.25\" Slice Width, ETL","description":"\u003cp\u003e\u003cstrong\u003eThe sharpener is built onto the machine.\u003c\/strong\u003e That single design choice decides how an 8-inch slicer ages: the HBS195JS220 keeps its edge in-house, so a blade that has gone dull on a shift of pastrami comes back in two minutes on the closing checklist rather than leaving with a service tech. Underneath it, an \u003cstrong\u003e8\" stainless blade\u003c\/strong\u003e runs a \u003cstrong\u003e6.25\" maximum slice width\u003c\/strong\u003e and a thickness range from \u003cstrong\u003e0.2 mm to 12 mm\u003c\/strong\u003e — shaved charcuterie through a thick cut for a hot sandwich.\u003c\/p\u003e\u003cp\u003eThe blade turns on a \u003cstrong\u003ebelt drive\u003c\/strong\u003e, keeping the motor off the blade shaft and the noise down where the slicer lives near the counter. A \u003cstrong\u003ePerspex protector guard\u003c\/strong\u003e stays over the blade in service and the \u003cstrong\u003ewaterproof emergency shut-off\u003c\/strong\u003e takes a hose-down without giving out. The carriage comes apart by hand for cleaning, so nightly breakdown is fast enough that it actually happens, and the \u003cstrong\u003eanodized aluminum body\u003c\/strong\u003e wipes clean between products.\u003c\/p\u003e\u003cp\u003eThe slicer measures \u003cstrong\u003e14.7\" deep x 15.7\" wide x 12\" tall\u003c\/strong\u003e, which fits on a prep table without giving up the whole station, and it is \u003cstrong\u003eETL listed by Intertek\u003c\/strong\u003e with a 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150504603806,"sku":"EUR-HBS195JS220","price":413.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS195JS220_HiResPictures_LeftView.jpg?v=1789708310"},{"product_id":"eurodib-hbs220js-9-belt-drive-meat-slicer-6-25-slice-width-120v","title":"Eurodib HBS220JS 9\" Belt-Drive Meat Slicer — 6.25\" Slice Width, 120V","description":"\u003cp\u003e\u003cstrong\u003eA 9-inch blade — one inch more than the HBS195JS, and it shows on every stroke.\u003c\/strong\u003e The larger diameter carries more edge past the product per revolution, which is what keeps slice faces clean on wide items like whole muscle roasts, mortadella, and long cuts of turkey. The HBS220JS holds a \u003cstrong\u003e6.25\" maximum slice width\u003c\/strong\u003e and dials thickness from \u003cstrong\u003e0.2 mm to 12 mm\u003c\/strong\u003e, so the same machine handles shaved deli meat in the morning and thicker steak or vegetable cuts for the line at lunch.\u003c\/p\u003e\u003cp\u003eDrive is by \u003cstrong\u003ebelt\u003c\/strong\u003e, which keeps the motor off the blade shaft and the noise down when the slicer sits within earshot of the dining room. The \u003cstrong\u003eintegrated sharpener\u003c\/strong\u003e restores the edge on the machine, no removal and no outside service. Add the optional \u003cstrong\u003eTeflon-coated blade\u003c\/strong\u003e and the same slicer handles cheese without gumming the edge — a second blade instead of a second machine. A \u003cstrong\u003ePerspex guard\u003c\/strong\u003e shields the blade, a \u003cstrong\u003ewaterproof emergency stop\u003c\/strong\u003e survives wash-down, and the carriage strips down by hand for nightly cleaning.\u003c\/p\u003e\u003cp\u003eThe body is \u003cstrong\u003eanodized aluminum with a stainless steel blade\u003c\/strong\u003e and plugs into a standard 120V outlet on a \u003cstrong\u003eNEMA 5-15P cord\u003c\/strong\u003e. Footprint is \u003cstrong\u003e14.8\" deep x 17.7\" wide x 13.7\" tall at 26.5 lb\u003c\/strong\u003e, shipping at 32 lb — a one-person set-up on any counter or prep table. \u003cstrong\u003ecETL US and ETL SLI listed\u003c\/strong\u003e, 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150509519006,"sku":"EUR-HBS220JS","price":437.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS220JS_HiResPicture_LeftView.jpg?v=1789708321"},{"product_id":"eurodib-hbs-250l-10-belt-drive-meat-slicer-6-25-slice-width-150w","title":"Eurodib HBS-250L 10\" Belt-Drive Meat Slicer — 6.25\" Slice Width, 150W","description":"\u003cp\u003e\u003cstrong\u003eA 10-inch stainless blade that sharpens itself on the machine and slices cheese with a swap of blade.\u003c\/strong\u003e The HBS-250L is built for the operation that runs charcuterie and a cheese program off the same counter: the standard stainless blade handles prosciutto, capicola, and roast, and the optional \u003cstrong\u003eTeflon-coated blade\u003c\/strong\u003e cuts hard and semi-soft cheese without dragging. Slice width tops out at \u003cstrong\u003e6.25\"\u003c\/strong\u003e and thickness runs from \u003cstrong\u003e0.2 mm to 12 mm\u003c\/strong\u003e, from a shaved sheet you can see through to a thick cut for a roast beef sandwich.\u003c\/p\u003e\u003cp\u003eThe blade turns on a \u003cstrong\u003ebelt drive\u003c\/strong\u003e, which isolates the motor from the blade shaft and drops the noise in a front-of-house slicing station. The \u003cstrong\u003eintegrated sharpener\u003c\/strong\u003e keeps that edge honed on site, and a keen edge is what separates clean charcuterie from torn slices. A \u003cstrong\u003ePerspex protector guard\u003c\/strong\u003e covers the blade during service, the \u003cstrong\u003ewaterproof emergency shut-off\u003c\/strong\u003e takes wash-down, and the carriage strips down by hand at close.\u003c\/p\u003e\u003cp\u003eThe motor pulls \u003cstrong\u003e150 watts at 1.4 amps\u003c\/strong\u003e through a \u003cstrong\u003eNEMA 5-15P cord\u003c\/strong\u003e into a standard 120V outlet, on a \u003cstrong\u003e16.3\" x 19.7\" x 14\"\u003c\/strong\u003e countertop footprint. It is \u003cstrong\u003eETL and cETL listed\u003c\/strong\u003e and conforms to Quebec safety standards (CNESST), with a 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150512730270,"sku":"EUR-HBS-250L","price":618.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/HBS-250.jpg?v=1789708325"},{"product_id":"eurodib-hbs-350l-14-belt-drive-meat-slicer-6-25-slice-width-400w","title":"Eurodib HBS-350L 14\" Belt-Drive Meat Slicer — 6.25\" Slice Width, 400W","description":"\u003cp\u003e\u003cstrong\u003eFourteen inches of blade.\u003c\/strong\u003e That is butcher-shop and high-volume deli territory — the diameter that keeps cutting through a full day of whole muscle roasts, bone-in-trimmed hams, and cheese wheels without the edge heating up and tearing product. The HBS-350L runs a \u003cstrong\u003e6.25\" maximum slice width\u003c\/strong\u003e and a thickness range of \u003cstrong\u003e0.2 mm to 12 mm\u003c\/strong\u003e, so the same machine shaves carpaccio at open and cuts steak-thick portions at close.\u003c\/p\u003e\u003cp\u003eA \u003cstrong\u003e400-watt motor\u003c\/strong\u003e drives the blade through a \u003cstrong\u003ebelt\u003c\/strong\u003e rather than a gear train, which keeps the motor off the blade shaft and the noise down in a shop where the slicer runs for hours. The \u003cstrong\u003eintegrated sharpener\u003c\/strong\u003e hones that 14-inch edge on the machine — pulling a blade this size for outside sharpening costs you the slicer for a week. A \u003cstrong\u003ePerspex protector guard\u003c\/strong\u003e stays over the blade in service, the \u003cstrong\u003ewaterproof emergency shut-off\u003c\/strong\u003e handles wash-down, and the carriage comes apart by hand for cleaning.\u003c\/p\u003e\u003cp\u003eIt runs on a standard 120V outlet, \u003cstrong\u003e2.3 amps through a NEMA 5-15P cord\u003c\/strong\u003e, so a machine this size still installs without an electrician. Allow \u003cstrong\u003e31\" of depth, 24\" of width, and 19.5\" of height\u003c\/strong\u003e — this one wants a dedicated station, not a corner of the prep table. \u003cstrong\u003eETL and cETL listed\u003c\/strong\u003e, conforms to Quebec safety standards (CNESST), 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150515089566,"sku":"EUR-HBS-350L","price":1581.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS350L_HiResPicture_LeftSide.jpg?v=1789708327"},{"product_id":"eurodib-hbs195js-8-belt-drive-meat-slicer-6-25-slice-width-120v","title":"Eurodib HBS195JS 8\" Belt-Drive Meat Slicer — 6.25\" Slice Width, 120V","description":"\u003cp\u003e\u003cstrong\u003eAn 8-inch stainless blade and a 6.25-inch slice width, in 15.7 inches of counter.\u003c\/strong\u003e That is a deli slicer sized for a sandwich shop, a café, or a restaurant prep table where the slicer has to share space with everything else. The HBS195JS takes a whole roast beef or a full block of turkey breast across the carriage and cuts anywhere from \u003cstrong\u003e0.2 mm to 12 mm\u003c\/strong\u003e — paper-thin prosciutto through a just-under-half-inch cut for roast — off one thickness dial.\u003c\/p\u003e\u003cp\u003eThe blade turns on a \u003cstrong\u003ebelt drive\u003c\/strong\u003e, which keeps the motor isolated from the blade shaft and runs quieter than a gear-driven head at the front counter. An \u003cstrong\u003eintegrated sharpener\u003c\/strong\u003e lives on the machine, so a dull edge is a two-minute job your closing crew handles instead of a service call and a week without a slicer. A \u003cstrong\u003ePerspex guard\u003c\/strong\u003e covers the blade and the \u003cstrong\u003ewaterproof emergency shut-off\u003c\/strong\u003e takes a wash-down without failing. The whole carriage assembly comes apart by hand for cleaning — no tools, which is the difference between a slicer that gets broken down nightly and one that does not.\u003c\/p\u003e\u003cp\u003eThe body is \u003cstrong\u003eanodized aluminum with a stainless steel blade\u003c\/strong\u003e, and it plugs into a standard 120V outlet on a \u003cstrong\u003eNEMA 5-15P cord\u003c\/strong\u003e. It sits \u003cstrong\u003e14.7\" deep x 15.7\" wide x 12\" tall and weighs 26.5 lb\u003c\/strong\u003e, arriving at 32 lb in the box — one person carries it in and sets it down. \u003cstrong\u003eETL and cETL listed\u003c\/strong\u003e, with a 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150517448862,"sku":"EUR-HBS195JS","price":413.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS195JS_HiResPictures_LeftView.jpg?v=1789708331"},{"product_id":"eurodib-hbs250l-10-meat-slicer-with-locking-system-120v-150w","title":"Eurodib HBS250L 10\" Meat Slicer with Locking System — 120V, 150W","description":"\u003cp\u003e\u003cstrong\u003eA 10-inch blade behind a locking system.\u003c\/strong\u003e The lock holds the carriage assembly in position so the machine cannot be run out of alignment mid-shift — the safety detail that decides whether a slicer belongs in a kitchen where four different people touch it on a Saturday. Ten inches of blade is the working size for a deli: whole muscle roasts, salami, cheese blocks, and long product that an 8-inch head has to fight.\u003c\/p\u003e\u003cp\u003eThe motor draws \u003cstrong\u003e150 watts at 1.4 amps\u003c\/strong\u003e from a standard 120V outlet on a \u003cstrong\u003eNEMA 5-15P cord\u003c\/strong\u003e, so the slicer shares a counter circuit instead of demanding its own. At \u003cstrong\u003e44 lb\u003c\/strong\u003e it has the mass to stay planted while the carriage moves — a light slicer walks across the counter and gives you wedge-shaped slices. Footprint is \u003cstrong\u003e16.3\" deep x 19.7\" wide x 14\" tall\u003c\/strong\u003e, sized for a dedicated slicing station or the end of a prep table.\u003c\/p\u003e\u003cp\u003eIt is \u003cstrong\u003ecETL US and ETL SLI listed\u003c\/strong\u003e, so it clears electrical inspection and carries sanitation listing for a commercial deli case operation.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150521086110,"sku":"EUR-HBS250L","price":618.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS250L_HiResPicture_Logo.jpg?v=1789708333"},{"product_id":"eurodib-hbs350l-14-belt-drive-meat-slicer-400w-190-lb-120v","title":"Eurodib HBS350L 14\" Belt-Drive Meat Slicer — 400W, 190 lb, 120V","description":"\u003cp\u003e\u003cstrong\u003eOne hundred ninety pounds of slicer under a 14-inch blade.\u003c\/strong\u003e Mass is the spec that separates a production slicer from a counter machine: at 190 lb the HBS350L does not shift when the carriage travels, so slice thickness stays the same on the hundredth cut as it was on the first. That matters when you are portioning a case of roast beef for a week of sandwiches rather than a few pounds at a time.\u003c\/p\u003e\u003cp\u003eA \u003cstrong\u003e400-watt motor\u003c\/strong\u003e turns the blade through a \u003cstrong\u003ebelt drive\u003c\/strong\u003e, keeping the motor off the blade shaft and holding blade speed through dense cold product where a weaker head would slow and tear. The \u003cstrong\u003eintegrated sharpener\u003c\/strong\u003e hones the edge on the machine, which on a 14-inch blade is the difference between a five-minute task and a week without your slicer. A \u003cstrong\u003ePerspex protector guard\u003c\/strong\u003e covers the blade in service, the \u003cstrong\u003ewaterproof emergency shut-off\u003c\/strong\u003e takes wash-down, and the carriage disassembles by hand for cleaning.\u003c\/p\u003e\u003cp\u003eIt draws \u003cstrong\u003e2.3 amps at 120V through a NEMA 5-15P cord\u003c\/strong\u003e — no dedicated circuit, no electrician, no hardwiring for a machine this size. Allow a station \u003cstrong\u003e31\" deep, 24\" wide, and 19.5\" tall\u003c\/strong\u003e. \u003cstrong\u003ecETL US and ETL SLI listed\u003c\/strong\u003e, with a 1-year warranty.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150522921118,"sku":"EUR-HBS350L","price":1581.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_HBS350L_HiResPicture_LeftSide_f1097e37-5e66-4ed5-8941-fbfb1a618728.jpg?v=1791349510"},{"product_id":"eurodib-mirra-250p-10-gravity-feed-meat-slicer-italian-built-120v-250w","title":"Eurodib Mirra 250P 10\" Gravity-Feed Meat Slicer — Italian Built, 120V, 250W","description":"\u003cp\u003e\u003cstrong\u003eTen inches of chrome-plated forged carbon steel, turned in Italy.\u003c\/strong\u003e The Mirra 250P's blade is 100Cr6 — the same bearing steel used in ball races — forged and chrome plated, which is why it takes a fine edge, holds it through a day of cured meat, and resists the acid that pits an ordinary blade. Ten inches is the size a restaurant charcuterie program and a busy sandwich counter both land on: enough diameter for whole muscle product, small enough to live on a 22\" deep counter.\u003c\/p\u003e\u003cp\u003eThe carriage is \u003cstrong\u003egravity feed\u003c\/strong\u003e, so product leans into the blade under its own weight and comes off in wide, even sheets — thickness adjusts continuously up to \u003cstrong\u003e0.5\"\u003c\/strong\u003e, from a shave you can read through to a portion cut. The slide runs on a \u003cstrong\u003eground, chromed steel shaft with self-lubricating bushings and ball bearings\u003c\/strong\u003e, a combination that keeps the stroke smooth long after a bushing-only carriage starts to drag. A \u003cstrong\u003eremovable two-stone dual-action sharpener\u003c\/strong\u003e hones and deburrs on the machine, and the \u003cstrong\u003ecarriage and center plate come out without tools\u003c\/strong\u003e at close. The hopper carries heavy-duty plastic hand protection and the switch has an indicator light, so nobody walks away from a live machine.\u003c\/p\u003e\u003cp\u003eIt runs \u003cstrong\u003e250 watts at 2.4 amps on 120V single-phase\u003c\/strong\u003e — a standard outlet. The footprint is \u003cstrong\u003e22\" deep x 22.4\" wide x 14.5\" tall\u003c\/strong\u003e, low enough to sit under most wall shelving. \u003cstrong\u003eUL and cETL listed\u003c\/strong\u003e with CNESST conformity and a 1-year warranty; a 10\" Teflon-coated blade is available separately for cheese.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150524100766,"sku":"EUR-MIRRA250P110","price":1542.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_MIRRA250P110_HiResPicture_2022.jpg?v=1789708340"},{"product_id":"eurodib-mirra-300-12-gravity-feed-meat-slicer-italian-built-120v-267w","title":"Eurodib Mirra 300 12\" Gravity-Feed Meat Slicer — Italian Built, 120V, 267W","description":"\u003cp\u003e\u003cstrong\u003eA 12-inch blade on a gravity-feed carriage, built in Italy.\u003c\/strong\u003e Gravity feed is why a charcuterie counter chooses this shape: the product rides down against the blade under its own weight at an angle, so a whole prosciutto or a coppa presents a wider face and comes off in broad, even sheets instead of narrow strips. The Mirra 300 cuts anywhere from a translucent shave up to \u003cstrong\u003e0.5\" thick\u003c\/strong\u003e on one adjustment, which covers carpaccio in the morning and roast portions at service.\u003c\/p\u003e\u003cp\u003eThe blade is \u003cstrong\u003echrome-plated 100Cr6 forged carbon steel\u003c\/strong\u003e — a bearing-grade steel that takes and holds a fine edge, and the chrome plating keeps acid from cured meat off the metal. The carriage rides a \u003cstrong\u003eground, chromed steel slide shaft\u003c\/strong\u003e on \u003cstrong\u003eself-lubricating bushings and ball bearings\u003c\/strong\u003e, so the stroke stays smooth after a year of daily use rather than getting notchy and dragging on the cut. A \u003cstrong\u003eremovable two-stone dual-action sharpener\u003c\/strong\u003e hones and deburrs in one pass, then lifts off the machine for cleaning. The carriage and center plate pull out \u003cstrong\u003ewithout tools\u003c\/strong\u003e, which is what makes a nightly breakdown realistic.\u003c\/p\u003e\u003cp\u003eThe motor draws \u003cstrong\u003e267 watts at 3 amps on 120V single-phase\u003c\/strong\u003e service — a standard outlet, no electrical work. Allow \u003cstrong\u003e24\" of depth, 25.2\" of width, and 20.06\" of height\u003c\/strong\u003e for the station. It is \u003cstrong\u003eUL and cETL listed\u003c\/strong\u003e, conforms to Quebec safety standards (CNESST), and carries a 1-year warranty. A 12\" Teflon-coated blade is available separately for cheese work.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48150526492830,"sku":"EUR-MIRRA300","price":2102.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/EURODIB_MIRRA300P110_HiResPicture_1.jpg?v=1789708342"},{"product_id":"bakemax-bmmg001-stainless-steel-meat-grinder-12-hub-1-hp-485-lbs-hr-120v","title":"BakeMax BMMG001 Stainless Steel Meat Grinder — #12 Hub, 1 HP, 485 lbs\/hr, 120V","description":"\u003cp\u003e485 pounds of ground meat an hour from a #12 grinder that stands 8 inches wide. The BakeMax BMMG001 is an all-stainless countertop grinder for restaurants, delis and meat counters that want to grind their own burger blend and sausage in house instead of buying it pre-ground.\u003c\/p\u003e\u003cp\u003eA 1 HP energy-efficient motor drives the auger through a precision gear drive. A forward and reverse switch lets you back the auger out to clear sinew, and an overload with reset protects the motor. The body is stainless steel with no sharp corners or seams, which is what makes it quick to wipe down between species and at close. Two stainless plates ship with it, 6 mm and 8 mm, and additional accessories are available from BakeMax on request.\u003c\/p\u003e\u003cp\u003eIt measures 8\" W x 18\" D x 16\" H, weighs 55 lbs, and plugs into a standard 120V outlet with a NEMA 5-15P cord, drawing 8 amps at 880 watts. ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523653275806,"sku":"BAK-BMMG001","price":2195.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMG001-Electric-Countertop-Meat-Grinder-485lbs-Per-Hour.webp?v=1790231847"},{"product_id":"bakemax-bmmg002-stainless-steel-meat-grinder-22-hub-1-5-hp-880-lbs-hr-120v","title":"BakeMax BMMG002 Stainless Steel Meat Grinder — #22 Hub, 1.5 HP, 880 lbs\/hr, 120V","description":"\u003cp\u003e880 pounds an hour through a #22 head, on standard 120V power. The BakeMax BMMG002 is an all-stainless countertop grinder for meat counters, delis and restaurants that grind in volume and want to do it on a standard NEMA 5-15P plug.\u003c\/p\u003e\u003cp\u003eThe 1.5 HP energy-efficient motor and precision gear drive turn the auger in a #22 head rated at up to 880 lbs an hour. A forward and reverse switch lets you back the auger out to clear sinew, and an overload with reset protects the motor. Stainless steel construction with no sharp corners or seams wipes clean fast, and 6 mm and 8 mm plates come in the box.\u003c\/p\u003e\u003cp\u003eIt measures 10\" W x 20\" D x 20\" H and weighs 88 lbs, drawing 10 amps at 1,120 watts through a NEMA 5-15P plug. ETL listed for electrical safety and ETL sanitation certified, backed by a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523659501726,"sku":"BAK-BMMG002","price":3102.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMG002-Electric-Countertop-Meat-Grinder-880lbs-Per-Hour.webp?v=1790231867"},{"product_id":"bakemax-bmmg003-titan-series-meat-grinder-12-hub-1-hp-350-lbs-hr-32-lbs-120v","title":"BakeMax BMMG003 Titan Series Meat Grinder — #12 Hub, 1 HP, 350 lbs\/hr, 32 lbs, 120V","description":"\u003cp\u003eA 1 HP, #12 meat grinder that weighs 32 pounds. The BakeMax Titan Series BMMG003 grinds up to 350 lbs of meat an hour and is light enough to lift off a shelf, set up for the morning grind, and put away again, which makes it a fit for restaurants and delis that grind daily but cannot give a grinder permanent counter space.\u003c\/p\u003e\u003cp\u003eThe body pairs anodized aluminum with stainless steel, keeping the weight down and cleaning up fast. A separate on\/off switch and a forward and reverse switch let you back sinew out of the head without taking it apart. It comes with 4.5 mm and 8 mm plates, for a fine burger grind or a coarse sausage and chili grind, on a common #12 hub size.\u003c\/p\u003e\u003cp\u003eThe unit measures 9\" W x 20\" D x 20\" H and runs on standard 120V power through a NEMA 5-15P plug at 7 amps and 850 watts. ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523666677918,"sku":"BAK-BMMG003","price":1840.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMG003-Titan-Series-Countertop-Meat-Grinder-350lbs-per-Hour.webp?v=1790231894"},{"product_id":"bakemax-bmmg004-titan-series-meat-grinder-22-hub-1-5-hp-660-lbs-hr-stuffer-120v","title":"BakeMax BMMG004 Titan Series Meat Grinder — #22 Hub, 1.5 HP, 660 lbs\/hr, Stuffer, 120V","description":"\u003cp\u003e660 pounds an hour through a #22 head, in a grinder that weighs 32 pounds. The BakeMax Titan Series BMMG004 gives a meat shop or high-volume restaurant a #22 grinder that is easy to set up and store, and with a meat stuffer in the box it is ready to fill sausage the day it arrives.\u003c\/p\u003e\u003cp\u003eA 1.5 HP motor drives the #22 auger, and the anodized aluminum and stainless steel body keeps the unit at 32 lbs and easy to clean. A forward and reverse switch clears sinew from the head, and the controls include on and off buttons plus an emergency shut-off switch. A meat pusher and a meat stuffer are included along with 4.5 mm and 8 mm plates, so you can go from whole muscle to fine grind to filled casing on one machine.\u003c\/p\u003e\u003cp\u003eIt measures 9.7\" W x 20.9\" D x 20.4\" H and runs on standard 120V power at 1,100 watts through a NEMA 5-15P plug. ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523680178334,"sku":"BAK-BMMG004","price":2230.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMG004-Titan-Series-Countertop-Meat-Grinder-660lbs-per-Hour.webp?v=1790231992"},{"product_id":"bakemax-bmmg005-titan-series-meat-grinder-32-hub-2-hp-1-100-lbs-hr-120v","title":"BakeMax BMMG005 Titan Series Meat Grinder — #32 Hub, 2 HP, 1,100 lbs\/hr, 120V","description":"\u003cp\u003eEleven hundred pounds of ground meat an hour, from a countertop grinder that plugs into the wall. The BakeMax Titan Series BMMG005 puts a #32 head and a 2 HP motor on the counter for butcher shops, grocery meat departments and processors that grind by the case, not the tray.\u003c\/p\u003e\u003cp\u003eThe 2 HP motor turns the auger in a #32 head, and an overload with reset protects the motor. The anodized aluminum and stainless steel body is built for durability and quick wipe-downs, with an on\/off switch. A meat pusher and 4.5 mm and 8 mm plates are included, and additional accessories are available from BakeMax on request.\u003c\/p\u003e\u003cp\u003eIt measures 10.7\" W x 23\" D x 20.8\" H and weighs 57 lbs, running on 110V single-phase power at 13 amps and 1,500 watts through a NEMA 5-15P plug. ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523689255070,"sku":"BAK-BMMG005","price":2810.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMG005-Titan-Series-Countertop-2HP-Heavy-Duty-Meat-Grinder-1100lbs.-per-Hour.webp?v=1790232028"},{"product_id":"bakemax-bmdxmcpw-16-x-20-manual-cold-meat-press-swing-away-platen-white-powder-coat","title":"BakeMax BMDXMCPW 16\" x 20\" Manual Cold Meat Press — Swing-Away Platen, White Powder Coat","description":"\u003cp\u003eA 16-by-20-inch pressing surface turns chicken breasts, pork cutlets or veal into even paillards with one pull of the handle. The BakeMax BMDXMCPW is a countertop manual cold meat press for kitchens that flatten protein in medium to high volume, where a mallet and plastic wrap are costing prep hours and producing cutlets of every thickness.\u003c\/p\u003e\u003cp\u003eBoth platens carry a non-stick PTFE coating, so cold, raw protein presses against a non-stick surface. The lower platen swings away from under the press, so you load and unload product out in the open. Thickness control is repeatable press after press, and an upper-platen leveling adjustment keeps the plates parallel so every piece comes out even edge to edge. Meat can go straight from the walk-in to the press, and even thin scaloppine and schnitzel cuts are within reach.\u003c\/p\u003e\u003cp\u003eThe press measures 26 inches wide, 29 inches deep and 36 inches tall and weighs 205 pounds, finished in heavy-duty white powder coat. It needs no electrical service. NSF certified, made in the USA and covered by a one-year warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523691876510,"sku":"BAK-BMDXMCPW","price":14700.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BMDXMCPW.webp?v=1790232057"},{"product_id":"bakemax-bmdxmsscp-16-x-20-stainless-steel-manual-cold-meat-press-swing-away-platen","title":"BakeMax BMDXMSSCP 16\" x 20\" Stainless Steel Manual Cold Meat Press — Swing-Away Platen","description":"\u003cp\u003eStainless steel outside, a 16-by-20-inch non-stick pressing surface inside, and even paillards every time the handle comes down. The BakeMax BMDXMSSCP is a countertop manual cold meat press for kitchens that flatten chicken, pork, veal and fish in medium to high volume, finished in heavy-duty stainless steel for the raw-protein prep area.\u003c\/p\u003e\u003cp\u003ePTFE-coated upper and lower platens give cold, raw protein a non-stick surface to press against. The lower platen swings out from under the press for loading, the thickness setting repeats press after press, and an upper-platen leveling adjustment keeps both plates parallel for edge-to-edge consistency. Product goes straight from refrigeration onto the platen, and thin cuts for scaloppine or schnitzel are easy to hit.\u003c\/p\u003e\u003cp\u003eThe press measures 26 inches wide, 29 inches deep and 36 inches tall and weighs 205 pounds. It runs with no electrical service at all. It carries NSF and ETL marks, is made in the USA and is covered by a one-year warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523694727326,"sku":"BAK-BMDXMSSCP","price":14700.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BMDXMSSCP_Main.webp?v=1790232074"},{"product_id":"bakemax-bmmsm08-8-gravity-feed-meat-slicer-belt-drive-0-2-12-mm-cuts-27-lbs-120v","title":"BakeMax BMMSM08 8\" Gravity Feed Meat Slicer — Belt Drive, 0.2-12 mm Cuts, 27 lbs, 120V","description":"\u003cp\u003eAn 8-inch slicer with a 15.7-inch footprint and a 27-pound body. The BakeMax BMMSM08 is built for cafes, sub shops and coffee counters that slice deli meat, cheese and vegetables to order on a tight counter.\u003c\/p\u003e\u003cp\u003eA 350 RPM belt-driven induction motor spins the 8-inch stainless blade, and the adjustable thickness control sets slices from shaved 0.2 mm to 12 mm. The gravity-feed carriage takes product up to 11 inches wide and 8 inches high, and both the carriage and blade come off for cleaning. A blade ring guard, food guard, built-in sharpener and waterproof on\/off switch round out the machine, and the polished anodized aluminum body wipes clean.\u003c\/p\u003e\u003cp\u003eIt measures 15.7\" W x 14.7\" D x 12\" H, draws 1.1 amps at 120 watts on a NEMA 5-15P plug, and sits on rubber feet. ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523695939742,"sku":"BAK-BMMSM08","price":1050.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMSM08-Commercial-8-Inch-Gravity-Feed-Electric-Meat-Slicer.webp?v=1790232079"},{"product_id":"bakemax-bmtxm15cp-15-x-15-manual-cold-meat-press-swing-away-top-platen-68-lb","title":"BakeMax BMTXM15CP 15\" x 15\" Manual Cold Meat Press — Swing-Away Top Platen, 68 lb","description":"\u003cp\u003eSixty-eight pounds, a 15-by-15-inch non-stick platen and no power cord: the BakeMax BMTXM15CP brings consistent paillards to restaurants, caterers and mobile kitchens running low to medium production. It is light enough to travel and small enough to live on a crowded prep counter.\u003c\/p\u003e\u003cp\u003eThe upper platen swings out of the way, so you lay out chicken, pork, veal or fish on an open lower plate. Both platens are PTFE coated for clean release of cold, raw protein, and the thickness control repeats from one press to the next, so every cutlet cooks through on the same timing. Product goes straight from refrigeration to the press, and thinner cuts are well within reach.\u003c\/p\u003e\u003cp\u003eThe footprint is 16.75 inches wide by 24 inches deep, and the press stands 15.25 inches tall, keeping a low profile on the counter. The steel frame wears a white powder-coat finish, and no electrical hookup is needed. NSF certified, made in the USA and backed by a one-year warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523697479838,"sku":"BAK-BMTXM15CP","price":2910.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BMTXM15CP.webp?v=1790232088"},{"product_id":"bakemax-bmmsm10-10-gravity-feed-meat-slicer-belt-drive-0-2-15-mm-cuts-150w-120v","title":"BakeMax BMMSM10 10\" Gravity Feed Meat Slicer — Belt Drive, 0.2-15 mm Cuts, 150W, 120V","description":"\u003cp\u003eA 10-inch blade that cuts anywhere from 0.2 to 15 mm, on a 20-inch-wide footprint. The BakeMax BMMSM10 is a gravity-feed slicer for delis, sandwich shops and restaurants that slice meat, cheese and vegetables to order every day.\u003c\/p\u003e\u003cp\u003eA 350 RPM belt-driven induction motor turns the 10-inch stainless blade, and the gravity-feed carriage holds product up to 11 inches wide and 8 inches high. Set it at 15 mm for thick-cut ham or tomato slices, or near 0.2 mm to shave roast beef. Carriage and blade remove for cleaning, and a ring guard, food guard, built-in sharpener and waterproof switch are standard.\u003c\/p\u003e\u003cp\u003eIt measures 20\" W x 16.5\" D x 14\" H, weighs 34 lbs, and draws 1.4 amps at 150 watts through a NEMA 5-15P plug. Polished anodized aluminum body, ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523699183774,"sku":"BAK-BMMSM10","price":1425.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMSM10-Commercial-10-Inch-Gravity-Feed-Electric-Meat-Slicer.webp?v=1790232105"},{"product_id":"bakemax-bmmsm12-12-gravity-feed-meat-slicer-belt-drive-250w-0-2-15-mm-cuts-120v","title":"BakeMax BMMSM12 12\" Gravity Feed Meat Slicer — Belt Drive, 250W, 0.2-15 mm Cuts, 120V","description":"\u003cp\u003eA 12-inch stainless blade on a 250-watt belt drive. The BakeMax BMMSM12 gives delis, butcher counters and busy restaurants a gravity-feed slicer for roasts, hams, cheese and vegetables, cut to any thickness from 0.2 to 15 mm.\u003c\/p\u003e\u003cp\u003eThe 350 RPM belt-driven induction motor runs the 12-inch stainless blade, and the adjustable thickness control sets slices from 0.2 to 15 mm. The gravity-feed carriage holds product up to 11 inches wide by 8 inches high, and both the carriage and blade remove for cleaning. A blade ring guard, food guard, built-in sharpener and waterproof on\/off switch come standard, all on a polished anodized aluminum body.\u003c\/p\u003e\u003cp\u003eIt measures 23.5\" W x 20\" D x 16.5\" H, weighs 52 lbs, and draws 2.3 amps at 250 watts through a NEMA 5-15P plug for a standard outlet. CE marked and backed by a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523702657182,"sku":"BAK-BMMSM12","price":1975.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMMSM12-Commercial-12-Inch-Gravity-Feed-Electric-Meat-Slicer.webp?v=1790232148"},{"product_id":"bakemax-bmcbs01-titan-series-countertop-bone-saw-65-band-blade-1-hp-8-25-cut-120v","title":"BakeMax BMCBS01 Titan Series Countertop Bone Saw — 65\" Band Blade, 1 HP, 8.25\" Cut, 120V","description":"\u003cp\u003eThree 65-inch band blades in the box, one each for frozen fish, frozen meat and frozen bone. The BakeMax Titan Series BMCBS01 is a stainless steel countertop band saw that lets meat shops, grocery counters and restaurants portion frozen product and cut through bone in house, with the right tooth pitch for whatever is on the table.\u003c\/p\u003e\u003cp\u003eA 1 HP motor drives the band, with an 8.25-inch maximum cutting height and a 17.2\" x 18.3\" feeding table. An adjustable thickness gauge lets you set the cut once for consistent chops, steaks and fish portions. A safety switch cuts power automatically when the door is opened, and a hand guard is standard.\u003c\/p\u003e\u003cp\u003eIt measures 18.9\" W x 18.1\" D x 34.3\" H and weighs 82 lbs, running on 120V single-phase power at 7 amps and 750 watts. Stainless steel construction, ETL listed for electrical safety and ETL sanitation certified, with a one-year limited warranty from BakeMax.\u003c\/p\u003e","brand":"BakeMax","offers":[{"title":"Default Title","offer_id":50523706130590,"sku":"BAK-BMCBS01","price":4360.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/BakeMax-BMCBS01-Titan-Series-1HP-Countertop-Bone-Saw-with-65-Inch-Blade.webp?v=1790232193"},{"product_id":"hobart-edge12-centerline-edge-series-12-manual-slicer-medium-duty-1-2-hp-120v","title":"Hobart EDGE12 Centerline Edge Series 12\" Manual Slicer — Medium Duty, 1\/2 HP, 120V","description":"\u003cp\u003eA 12-inch knife driven by a 1\/2 HP motor, with a carriage that clears product 10 inches wide. The Centerline by Hobart EDGE12 is a medium-duty manual slicer for restaurants, delis and sandwich shops that slice meat, cheese and produce several times a shift and want full deli capacity without paying for heavy-duty hours they will never run.\u003c\/p\u003e\u003cp\u003eThe extra half horsepower over the entry model is what keeps dense product moving: firm provolone, a cold ham or a brick of pepper jack goes through without the knife bogging down or tearing the slice. A Poly-V belt links the enclosed ball-bearing motor to a forged, hollow-ground, chrome-plated carbon steel knife, and the 45° product table leans the load into the blade so your cooks push less on every stroke. Slices adjust from tissue-thin to 9\/16 inch, the carriage takes product 10 inches wide by 6 inches high or an 8-inch round, and a pull of the top-mounted two-stone sharpener sharpens and hones the edge in 15 seconds.\u003c\/p\u003e\u003cp\u003eSafety and sanitation are handled by the machine. A no-volt release keeps the slicer from restarting by itself after a power interruption, a gauge-plate interlock stops the carriage from coming off unless the gauge plate is closed over the edge, and a permanent ring guard stays in place while you clean. The base is one-piece anodized aluminum, the carriage and product deflector come off for washing, and the sharpener can be submerged. It measures 26.32 inches wide, 23.14 inches deep and 21.88 inches high, weighs 68 pounds, and plugs into a standard 120V outlet with a 6-foot cord and NEMA 5-15P plug at 4 amps. ETL listed, NSF rated and covered by Hobart's one-year parts, service and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527915999390,"sku":"HOB-EDGE12-11","price":3404.99,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST","offer_id":68056325849246,"sku":"HOB-EDGE12 - CSST","price":6548.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20EDGE12-11_20qr_20.png?v=1790262127"},{"product_id":"hobart-hs7n-hs-series-13-automatic-heavy-duty-slicer-non-removable-knife-1-2-hp-120v","title":"Hobart HS7N HS Series 13\" Automatic Heavy-Duty Slicer, Non-Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eFour carriage speeds and three stroke lengths across a 13-inch cobalt-edged knife that stays fixed on the machine. The Hobart HS7N is the non-removable-knife version of Hobart's automatic heavy-duty slicer, built for delis, commissaries and supermarket counters that slice in volume, clean the knife in place, and never want a loose 13-inch blade traveling to the sink.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch. The automatic carriage runs at any of four speeds over three stroke lengths set from the front panel, so a short stroke on a small salami moves faster than a full-length pass on a whole ham.\u003c\/p\u003e\u003cp\u003eThe knife stays on the machine, and the cleaning design is built around that. Lift off the Zytel ring guard cover and there is a 0.12-inch gap between the knife and the guard, enough to floss a folded towel all the way around the edge. The magnetically held stainless knife cover, the top-mounted sharpener and the meat grip come off without tools, and the carriage tilts out of the way or lifts off completely, leaving a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt runs on a standard 120V outlet, drawing 5.6 amps through a 6-foot cord with a molded NEMA 5-15P plug, so the install is a plug-in. The HS7N measures 24-5\/8 inches wide, 26-3\/8 inches deep and 27-1\/4 inches tall and ships at 138 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, carries NSF and ETL marks, and is covered by Hobart's one-year parts and service warranty, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527924781214,"sku":"HOB-HS7N-1","price":25160.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS7_20qr_20.png?v=1790262435"},{"product_id":"hobart-hs9n-hs-series-13-automatic-heavy-duty-slicer-non-removable-knife-1-2-hp-120v","title":"Hobart HS9N HS Series 13\" Automatic Heavy-Duty Slicer, Non-Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eFour carriage speeds, three stroke lengths and a 13-inch cobalt-edge knife that stays bolted to the machine. The Hobart HS9N is the fixed-knife version of the HS9 automatic, for high-volume delis and commissaries that want hands-free slicing without a knife removal tool to track or a bare 13-inch blade ever leaving the slicer.\u003c\/p\u003e\u003cp\u003eSet speed and stroke from the front-mounted controls and change either mid-run: short strokes for pepperoni and half logs, full strokes for a whole ham, and a lever to go back to hand slicing for a single order. The CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge that Hobart rates at two to three times the life of carbon-coated or plain stainless knives, driven at 430 rpm by a 1\/2 HP motor through a poly-V belt. The double-action index knob shaves on its first turn and opens to 1-inch slices on its second, and the carriage takes product up to 5.75 by 10.75 inches or 7.5 inches round.\u003c\/p\u003e\u003cp\u003eCleaning a fixed knife is about access. Lift the Zytel ring guard cover and a 0.12-inch gap opens between knife and guard for flossing. The magnetic knife cover pulls straight off, the carriage tilts for a mid-shift wipe-down and lifts off at close, and a gas assist spring holds the base up while you clean underneath. The edge stays covered during sharpening and cleaning, the top-mounted Borazon sharpener hones in 15 seconds with lifetime-guaranteed stones, and six interlocks (no-volt release, gauge plate interlock, 30-second shut-off, close-to-stop, home-to-start and carriage system interlock) guard the knife.\u003c\/p\u003e\u003cp\u003eThe HS9N plugs into a standard 120V outlet, drawing 5.6 amps through a 6-foot cord with a NEMA 5-15P plug. It needs 30-5\/16 inches of width for full carriage travel, 24-5\/8 inches of depth and 27-1\/4 inches of height, ships at 142 pounds, and sits on a one-piece sanitary anodized aluminum base under a stainless steel top cover. NSF certified, cETLus listed, with one year of Hobart parts and service coverage that includes the knife.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527925371038,"sku":"HOB-HS9N-1","price":27853.0,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST (French)","offer_id":68056334401694,"sku":"HOB-HS9N-1 - CSST","price":29796.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS9_20qr_20.png?v=1790262487"},{"product_id":"hobart-mg1532-mixer-grinder-150-lb-hopper-7-5-hp-grind-1-hp-mix","title":"Hobart MG1532 Mixer-Grinder, 150 Lb Hopper — 7.5 HP Grind \/ 1 HP Mix","description":"\u003cp\u003eA 150-pound hopper, a 7.5 HP grind motor and a separate 1 HP mix motor in a double-wall stainless machine. The Hobart MG1532 mixer-grinder blends and grinds ground beef, sausage and seasoned product in one load, sized for supermarket meat departments, butcher shops and processors that want production-scale mixing without giving up the floor space of the largest hopper.\u003c\/p\u003e\u003cp\u003eIts WEDGE cylinder grinding end feeds at full rate through the entire batch, so the grind stays even to the bottom of the hopper and no one has to push product down. Front-mounted, water-resistant switches, magnetic contactors and dual-motor overload protection run mix-only or mix-and-grind, and the machine accepts the optional pneumatic foot control. An optional right-side feed inlet and #32 adapter ring let the MG1532 run in tandem with a second mixer-grinder. The end takes #32 knives and plates, which are sold separately.\u003c\/p\u003e\u003cp\u003eDouble-wall construction and a double-sealed push-button panel with a condensate heater stand up to a wet meat room. The glass-bead-finished stainless hopper is angled toward the operator for easier loading and cleaning, the counterbalanced lid is interlocked so the motors stop the moment it opens, and the mixing arm, conveyor screw, cylinder and the hand-removable, interchangeable seals come out for cleaning.\u003c\/p\u003e\u003cp\u003eOrder it for 208V three-phase (30 amps) with an 8-foot cord and NEMA L15-30P plug, 480V three-phase (15 amps) with an L16-20P plug, or 380-415V 50 Hz three-phase (20 amps). Receptacles go in a watertight Type FD conduit box. The MG1532 measures 26-7\/8 inches wide, 50-3\/4 inches deep and 48-3\/4 inches tall with the lid closed (84-1\/8 inches open), discharges at 31-1\/4 inches, and ships at 859 pounds. It carries cULus and NSF marks and Hobart's one-year warranty on parts, labor and mileage, with service plans available.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527926747294,"sku":"HOB-MG1532-16","price":61566.0,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST","offer_id":68056329453726,"sku":"HOB-MG1532 - CSST","price":66739.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Mixer-Grinder_20MG1532_20f_20.png?v=1790262533"},{"product_id":"hobart-4732a-meat-chopper-with-removable-stainless-feed-pan-3-hp-32-35-40-lb-min","title":"Hobart 4732A Meat Chopper with Removable Stainless Feed Pan — 3 HP, #32, 35-40 Lb\/Min","description":"\u003cp\u003eThe feed pan lifts off and goes to the sink. That is what sets the Hobart 4732A apart: the same 3 HP, #32 wide-mouth chopping power that grinds 35 to 40 pounds of fresh meat a minute, topped with a 14-gauge stainless steel pan that unlocks with a knob, so it gets washed and sanitized like any other smallware instead of being scrubbed in place on top of the motor housing.\u003c\/p\u003e\u003cp\u003eAn interlock is built around that removable pan: the chopper will not start unless the pan is seated and locked on its alignment brackets, so a loose or missing pan never becomes an open feed throat. Underneath, the worm turns at a slow 151 rpm through a double-reduction transmission of oil-lubricated, hardened helical-cut steel gears, with a tapered roller thrust bearing in the hub and a double lip seal against moisture. The spiral-fluted cylinder, deep-fluted worm and adjusting ring are heavily tinned cast iron, and a #32 Stay-Sharp knife and 1\/8-inch plate come with the machine. Run a second grind at 25 to 30 pounds a minute.\u003c\/p\u003e\u003cp\u003eInside, the pan is 34 by 21 inches and 4-15\/16 inches deep, with a cast aluminum guard across the front and sides, and a fiberglass heat barrier keeps motor warmth out of the product. At close the pan, adjusting ring, knife, plate, worm and cylinder all go to the sink, and the housing takes a wipe with a damp cloth. The on\/off switch mounts for right- or left-hand operation.\u003c\/p\u003e\u003cp\u003eOn standard 5-3\/8-inch legs the 4732A stands 27-3\/8 inches tall with 8 inches under the adjusting ring, and it is 41-13\/16 inches from grinding end to the back of the pan; 18- and 21-inch leg sets convert it to a floor model. Order it for 230V single-phase (18 amps), 200V three-phase (8.6 amps) or 230V three-phase (8.1 amps), all UL listed. No cord is supplied, and it connects through a 3\/4-inch trade-size conduit. It carries cULus and NSF marks and Hobart's one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527936938142,"sku":"HOB-4732A-10STD","price":34152.0,"currency_code":"CAD","in_stock":true},{"title":"Stainless Steel","offer_id":68056338104478,"sku":"HOB-4732A-18STD","price":37085.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/4732A-10STD.jpg?v=1791355632"},{"product_id":"hobart-4812-meat-chopper-12-stainless-benchtop-1-2-hp-8-lb-min","title":"Hobart 4812 Meat Chopper, #12 Stainless Benchtop — 1\/2 HP, 8 Lb\/Min","description":"\u003cp\u003eEight pounds of meat a minute through a 1\/8-inch plate, from a chopper that takes up about two feet of counter. The Hobart 4812 pairs a 1\/2 HP motor with a #12 spiral-fluted chopping end, sized for restaurants, cafes and small kitchens that want fresh house-ground burger, sausage and meatball mix without committing floor space or a large budget to a production grinder.\u003c\/p\u003e\u003cp\u003eThe four-pole, capacitor-start, capacitor-run motor drives the worm at 174 rpm through precision gears and shafts on ball bearings, fully enclosed and grease-packed at the factory, and it breathes through screened openings in the base. The cylinder flutes are timed to the pitch of the worm so product feeds steadily, and the protective-type chopping end is heavily tinned. A #12 Stay-Sharp knife in hardened alloy steel, a heat-treated plate and a plastic stomper come in the box.\u003c\/p\u003e\u003cp\u003eEverything that touches food comes off for cleaning: cylinder, worm, knife, plate, adjusting wheel and the stainless feed pan, and the whole chopping end releases by loosening a single holding screw. The housing is stainless steel with a stainless trim plate at the attachment opening, and polished stainless legs sit on neoprene feet. The machine is 24 inches long, 12-13\/16 inches across the pan and 23-1\/4 inches tall, and the pan holds 19-1\/2 by 11-1\/2 inches of product.\u003c\/p\u003e\u003cp\u003eOrder the 4812 for 120V (7 amps) or 240V single-phase (3.5 amps), both UL listed, or for 230V 50 Hz. The 120-volt model ships with a 6-foot cord and NEMA 5-15P plug for a standard 15-amp outlet, and the on\/off switch mounts at the back or the front. It carries UL and NSF marks, weighs 92 pounds with chop end and pan, and Hobart backs it with a one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527936970910,"sku":"HOB-4812-37","price":14063.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Meat_20Chopper_204812_20ql_20.png?v=1790263264"},{"product_id":"hobart-4146-floor-meat-grinder-no-46-wide-mouth-end-5-hp-60-65-lb-min","title":"Hobart 4146 Floor Meat Grinder, No. 46 Wide-Mouth End — 5 HP, 60-65 Lb\/Min","description":"\u003cp\u003eSixty to sixty-five pounds of fresh beef a minute on the first grind, through a 1\/8-inch plate. The Hobart 4146 is a floor-standing meat grinder with a 5 HP motor and a No. 46 wide-mouth grinding end, built for supermarket meat departments, butcher shops and processors that turn whole deliveries of trim into ground beef, burger blends and sausage stock every day.\u003c\/p\u003e\u003cp\u003eThe worm turns at 215 rpm through a double-reduction transmission of oil-lubricated, hardened helical-cut steel gears, and a large tapered roller bearing in the attachment hub absorbs the thrust, so cold, dense trim goes through without the machine laboring. The spiral-fluted cylinder and deep-fluted worm pull product forward on their own, and the cylinder, bowl, worm and adjusting ring are heavily tinned cast iron that resists oxidation and rinses clean. The end runs standard #32 knives and plates, and it arrives with a #32 Stay-Sharp knife and 1\/8-inch plate in hardened alloy steel that holds its edge longer than carbon steel and takes many more resharpenings. A second grind still moves at 45 to 50 pounds a minute, so a coarse-then-fine grind of a full lug is done before the next one is staged.\u003c\/p\u003e\u003cp\u003eThe heavily tinned 14-gauge feed pan is 49 inches long and 26-3\/4 inches wide with a 9-inch high back, so you can load a full batch without meat spilling off the side. A cast aluminum guard is permanently fixed over the pan, and an electrical interlock keeps the grinder from starting unless the bowl and pan are locked in their operating positions. At cleanup the pan unclamps and tilts back onto its own rest, and the cylinder comes off by loosening two nuts. The housing is stainless steel, the junction box is waterproof, and a magnetic starter with automatic-reset thermal overload protection guards the motor.\u003c\/p\u003e\u003cp\u003eStandard 16-inch legs leave 21-3\/4 inches between the floor and the adjusting ring, enough to park a lug under the discharge, and 18-1\/2 and 21-inch leg sets are available. The grinder measures 57-1\/4 inches long, 26-5\/8 inches deep and 47-9\/16 inches tall on standard legs, and a right-hand machine ships unless you specify otherwise. Order it for 200V or 230V three-phase 60 Hz service (UL listed), or for 208V three-phase or 380V 50 Hz three-phase. It connects permanently through a 3\/4-inch trade-size conduit with no cord supplied. It carries UL and NSF marks, ships as base, chop end, pan and legs, and Hobart covers it with a one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527937003678,"sku":"HOB-4146-19","price":34026.0,"currency_code":"CAD","in_stock":true},{"title":"230\/60\/3, Stainless Finish (-4)","offer_id":68056334434462,"sku":"HOB-4146-4","price":35263.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Meat_20Grinder_204146_20s_20wDeflector_20.png?v=1790263266"},{"product_id":"hobart-4822-meat-chopper-22-stainless-benchtop-1-1-2-hp-16-lb-min","title":"Hobart 4822 Meat Chopper, #22 Stainless Benchtop — 1-1\/2 HP, 16 Lb\/Min","description":"\u003cp\u003eSixteen pounds of meat a minute through a 1\/8-inch plate, from a stainless steel chopper that fits on a standard work table. The Hobart 4822 puts a 1-1\/2 HP motor behind a #22 spiral-fluted chopping end, sized for restaurants, delis and small meat counters that want to grind their own burger, sausage and taco meat fresh every day instead of buying it pre-ground.\u003c\/p\u003e\u003cp\u003eThe worm runs at 212 rpm through precision gears and shafts on ball bearings, fully enclosed and packed with grease at the factory, and the attachment hub is double sealed to keep meat juice and wash water out of the transmission. The protective-type chopping end has a spiral-fluted cylinder and a heavy cast aluminum safety guard on posts fixed to the cylinder, and the cylinder, worm and adjusting ring are heavily tinned. It comes with a #22 Stay-Sharp knife and 1\/8-inch plate in alloy steel that keeps its edge longer and resharpens many times over, plus a plastic feed stomper. Step up to the optional funnel-shaped (FS) guarded open-bowl end and its 33-inch pan when you need 20 to 22 pounds a minute.\u003c\/p\u003e\u003cp\u003eThe whole machine is 29-7\/8 inches long, 12-13\/16 inches across the pan and 23-1\/4 inches tall, and it stands on polished stainless steel legs with neoprene feet. The housing and trim plate are stainless steel, the standard pan is 19-1\/2 by 11-1\/2 inches inside, and the manual on\/off switch sits at the back or moves to the front.\u003c\/p\u003e\u003cp\u003eOrder the 4822 for 120V (12 amps), 240V single-phase (6 amps) or 208-240V three-phase (3.4 amps), all UL listed, or 230V 50 Hz. The 120-volt model ships with a 6-foot cord and NEMA 5-15P plug for a standard 15-amp outlet. It carries UL and NSF marks, weighs 120 pounds with the chop end and pan, and Hobart covers it with a one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"120\/60\/1","offer_id":50527937069214,"sku":"HOB-4822-38","price":17489.0,"currency_code":"CAD","in_stock":true},{"title":"240\/60\/1","offer_id":68056334106782,"sku":"HOB-4822-35","price":17489.0,"currency_code":"CAD","in_stock":true},{"title":"208-240\/60\/3 (-36)","offer_id":68056334139550,"sku":"HOB-4822-36","price":17489.0,"currency_code":"CAD","in_stock":true},{"title":"208-240\/60\/3 (-37)","offer_id":68056334172318,"sku":"HOB-4822-37","price":17489.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Meat_20Chopper_204822_20qr_20.png?v=1790263268"},{"product_id":"hobart-4732-meat-chopper-with-fixed-stainless-feed-pan-3-hp-32-35-40-lb-min","title":"Hobart 4732 Meat Chopper with Fixed Stainless Feed Pan — 3 HP, #32, 35-40 Lb\/Min","description":"\u003cp\u003eThirty-five to forty pounds of fresh meat a minute, from a chopper that sits on your cutting-room table. The Hobart 4732 pairs a 3 HP motor with a #32 wide-mouth grinding end and a 14-gauge stainless steel feed pan that is fixed to the housing, a one-piece top with no pan to misplace, drop or knock out of alignment during a busy morning of grinding.\u003c\/p\u003e\u003cp\u003ePower reaches the worm through a double-reduction transmission of oil-lubricated, hardened helical-cut steel gears, and a tapered roller bearing in the hub carries the thrust of a hard-packed cylinder. The worm turns at a deliberately slow 151 rpm, so meat is cut cleanly rather than smeared, and a double lip seal keeps gear oil in and wash water out. The spiral-fluted cylinder, deep-fluted worm and adjusting ring are heavily tinned cast iron, and the chopper arrives with a #32 Stay-Sharp knife and 1\/8-inch plate in alloy steel that stays sharp longer and resharpens many times over. A second grind runs 25 to 30 pounds a minute.\u003c\/p\u003e\u003cp\u003eThe pan measures 34 by 21 inches inside and 4-15\/16 inches deep, with a cast aluminum guard fixed across the front and sides. A heavy fiberglass sheet between the pan and the motor compartment keeps motor heat away from the meat. Because the pan stays on the machine, cleanup happens in place: the deflector, adjusting ring, knife, plate, worm and cylinder come off with the spanner wrench and go to the sink, and the pan is washed where it sits. The on\/off switch can be mounted for right- or left-hand operation.\u003c\/p\u003e\u003cp\u003eOn its standard 5-3\/8-inch legs the 4732 stands 27 inches tall with 8 inches of clearance under the adjusting ring, and it runs 41-13\/16 inches from the grinding end to the back of the pan. Add 18- or 21-inch leg sets to turn it into a floor model. The 4732 offers the widest electrical choice in this chopper family: 200V single-phase (19.5 amps), 230V single-phase (18 amps), 200V three-phase (8.6 amps) and 230V three-phase (8.1 amps), all UL listed, plus 208V three-phase and 380V 50 Hz three-phase. No cord or plug is supplied; it connects through a 3\/4-inch trade-size conduit. It carries cULus and NSF marks and Hobart's one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"200\/60\/3","offer_id":50527937101982,"sku":"HOB-4732-86","price":33018.0,"currency_code":"CAD","in_stock":true},{"title":"230\/60\/1","offer_id":68068227252382,"sku":"HOB-4732-35STD","price":33018.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Meat_20Chopper_204732_20qr_20wDeflector_20.png?v=1790263268"},{"product_id":"hobart-6801-vertical-meat-saw-142-blade-3-hp-4-150-fpm-24-cutting-width","title":"Hobart 6801 Vertical Meat Saw, 142\" Blade — 3 HP, 4,150 FPM, 24\" Cutting Width","description":"\u003cp\u003eA 24-inch-wide, 17-1\/2-inch-tall cutting window with 15-3\/4 inches of throat, and a blade running 4,150 feet per minute. The Hobart 6801 is a floor-standing vertical meat saw with a 3 HP motor and a 142-inch blade, built for meat departments and processors that break bone-in primals and cut steaks, chops, ribs and frozen blocks to a consistent thickness all day long.\u003c\/p\u003e\u003cp\u003eThe motor drives the upper pulley through a direct gear-drive transmission with helical gear reduction, so there are no belts to slip, stretch or replace. The motor, transmission and lower pulley are pivot-mounted to set blade tension automatically, with the tension control within reach below the table. Bright-tinned cast iron pulleys with double flanges and a center crown keep the blade tracking true, and a built-in tungsten carbide back-up block supports it through heavy cuts. A 6-3\/4 by 16-3\/4-inch stainless gauge plate on a cast aluminum frame sets cut thickness quickly and repeats it slice after slice.\u003c\/p\u003e\u003cp\u003eYou work on a 21-1\/2 by 39-5\/8-inch stainless stationary table with turned-down edges and a 16 by 24-1\/4-inch movable carriage tray that rides a tri-rail support on stainless ball bearings, with a carriage lock standard. Guards cover the blade above and below the cutting zone, and a pusher plate keeps hands away from the blade. For cleanup, the open stainless frame hoses down and power-washes up to 1,100 PSI, both pulleys, the blade cleaners and the guide assemblies come off without tools, and bone dust collects in a large lower scrap pan.\u003c\/p\u003e\u003cp\u003eThe 6801 is orderable for 200-240V single-phase (16.5 amps), 200-230V three-phase, 208-240V three-phase or 460V three-phase, plus 380-415V 50\/60 Hz, with an optional 6-foot cord and NEMA L15-20P plug on 200-230V three-phase units. A control-box heater keeps condensation off the electrical components, and the switch is a single pull-to-start, push-to-stop control. The saw measures 38-1\/4 inches wide and 73-7\/8 inches tall, with a 33-1\/2-inch table height that adjustable legs raise up to 2 inches more, and it weighs 430 pounds. It carries cULus and NSF marks and Hobart's one-year parts, labor and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527937495198,"sku":"HOB-6801-22","price":38536.0,"currency_code":"CAD","in_stock":true},{"title":"200-240V\/60\/1 (US\/Export)","offer_id":68068243898526,"sku":"HOB-6801-26","price":38536.0,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST (200-230V\/60\/3)","offer_id":68056325554334,"sku":"HOB-6801 - CSST","price":47720.0,"currency_code":"CAD","in_stock":true},{"title":"Integrated Pusher, 208-230V\/60\/3 (6801-22IP)","offer_id":68088911036574,"sku":"HOB-6801-22IP","price":40920.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/i_9ae3f422-1836-4d70-85f1-969acaa51fa6.jpg?v=1791701049"},{"product_id":"hobart-6614-vertical-meat-saw-126-blade-3-hp-3-500-fpm-20-cutting-width","title":"Hobart 6614 Vertical Meat Saw, 126\" Blade — 3 HP, 3,500 FPM, 20\" Cutting Width","description":"\u003cp\u003eA 20-inch-wide, 15-1\/4-inch-tall cutting window and 12-1\/2 inches of throat, on a saw frame built to fit a tighter meat room. The Hobart 6614 is a reduced-footprint vertical meat saw with a 3 HP motor driving a 126-inch blade at 3,500 feet per minute, the right size for butcher shops, smaller supermarket meat departments and restaurants that cut bone-in steaks, chops and frozen product but do not have room for a full-size saw.\u003c\/p\u003e\u003cp\u003ePower goes to the upper pulley through a direct gear-drive transmission with helical gear reduction, so there is no belt to slip, adjust or break. The motor, transmission and lower pulley pivot to keep blade tension set automatically, with the tension control right under the table. Double-flanged, center-crown pulleys in bright-tinned cast iron keep the blade tracking true, a tungsten carbide back-up block supports the blade, and a 6-3\/4 by 16-3\/4-inch stainless gauge plate on a cast aluminum frame locks in cut thickness.\u003c\/p\u003e\u003cp\u003eThe stationary table is 18-1\/4 by 34-1\/2 inches of heavy stainless steel with turned-down edges, split into two pieces for cleaning, and the 14-1\/2 by 19-3\/4-inch carriage tray glides on stainless ball bearings over a tri-rail support, with a carriage lock standard. Upper and lower guards cover the blade outside the cutting zone. At close, the open stainless frame can be hosed down or power-washed to 1,100 PSI, pulleys, blade cleaners and guides come off without tools, and the enclosed scrap pan collects bone dust.\u003c\/p\u003e\u003cp\u003eOrder the 6614 for 200-240V single-phase (16.5 amps), 200-230V three-phase, 208-240V three-phase or 460V three-phase, or 380-415V 50\/60 Hz, and add a 6-foot cord with NEMA L15-20P plug on 200-230V three-phase units. A control-box heater prevents condensation, and a single pull-to-start, push-to-stop switch runs the saw. It measures 34 inches wide and 68-13\/16 inches tall with a 34-13\/16-inch table height, standard legs adjust from 1-3\/4 to 2-1\/4 inches with a 4-inch option, and it weighs 410 pounds. It carries cULus and NSF marks and Hobart's one-year parts, labor and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527937626270,"sku":"HOB-6614-3","price":33201.0,"currency_code":"CAD","in_stock":true},{"title":"CSST (Quebec)","offer_id":68056338137246,"sku":"HOB-6614 - CSST","price":38391.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/i_4c87695e-664f-43d6-9daf-de6c3e29c896.jpg?v=1791701065"},{"product_id":"hobart-edge10-centerline-edge-series-10-manual-slicer-medium-duty-1-3-hp-120v","title":"Hobart EDGE10 Centerline Edge Series 10\" Manual Slicer — Medium Duty, 1\/3 HP, 120V","description":"\u003cp\u003eA 10-inch knife, a 1\/3 HP motor and a footprint 20.5 inches wide by 16.5 inches deep. The Centerline by Hobart EDGE10 is the compact entry to the Edge Series: a medium-duty manual slicer for cafes, sandwich counters, bars and small delis that cut meat and cheese to order a few times an hour, not for hours at a stretch. At 37.5 pounds it moves from the shelf to the prep counter with one person.\u003c\/p\u003e\u003cp\u003eThe 45° product table angles the load into the knife so gravity does part of the pushing, and a Poly-V belt carries power from the enclosed, ball-bearing motor to the blade with fewer wear parts to replace. The knife itself is forged carbon steel, hollow-ground, hardened and chrome-plated to hold its edge longer between sharpenings. Turn the index knob and slice thickness runs from tissue-thin shaved turkey to a 9\/16-inch slab of cheddar, and the carriage takes product up to 8 inches wide by 6 inches high, or a 7-inch round, through 11.5 inches of stroke.\u003c\/p\u003e\u003cp\u003eUpkeep is built around a short close. The base is a single piece of anodized aluminum with few seams for residue to settle into, the carriage lifts off, the product deflector comes off by hand, and the two-stone ceramic sharpener lifts off its post and can go fully under water. A permanent ring guard stays on the knife through slicing and cleaning, and the rear-mounted meat grip with its contoured handle keeps fingers clear on the last few slices. It runs on a standard 120V outlet through a 6-foot cord with a NEMA 5-15P plug and draws 4 amps. ETL listed, NSF rated and backed by Hobart's one-year parts, service and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527938085022,"sku":"HOB-EDGE10-11","price":2283.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20EDGE10-11_20f_20.png?v=1790263364"},{"product_id":"hobart-edge13a-centerline-edge-series-13-automatic-manual-slicer-medium-duty-1-2-hp-120v","title":"Hobart EDGE13A Centerline Edge Series 13\" Automatic\/Manual Slicer — Medium Duty, 1\/2 HP, 120V","description":"\u003cp\u003eFlip one lever and the carriage strokes by itself. The Centerline by Hobart EDGE13A is the automatic model in the Edge Series: a 13-inch, 1\/2 HP medium-duty slicer that runs a single-speed automatic stroke when you have a whole chub to get through, and switches back to hand operation when a customer wants six slices of something special. Delis, markets and sandwich operations get the throughput of an automatic without stepping up to a heavy-duty price.\u003c\/p\u003e\u003cp\u003eWith the carriage doing the pushing, your prep cook is free to catch, stack and portion instead of working the handle, and every slice comes off at the same pace and thickness. Separate blade-power and automatic buttons put control of each function in plain view. The knife is forged, hollow-ground, chrome-plated carbon steel driven through a Poly-V belt by an enclosed ball-bearing motor, the 45° table leans product into the edge, and the carriage takes product up to 9.5 inches wide by 7 inches high or 8.5 inches round. Slice thickness runs from tissue-thin to 9\/16 inch, and a pull of the two-stone ceramic sharpener restores the edge in 15 seconds.\u003c\/p\u003e\u003cp\u003eThree interlocks guard the operator: a no-volt release that keeps the slicer off after a power interruption, a gauge-plate interlock that keeps the carriage on unless the plate is closed, and a carriage-system interlock that will not release the carriage until the gauge-plate indicator reads closed. The permanent ring guard, one-piece anodized aluminum base, removable carriage, tool-free deflector and submersible sharpener handle sanitation. The EDGE13A stands on raised legs at 27.58 inches wide, 22.83 inches deep and 28.15 inches high and weighs 107 pounds. It plugs into a standard 120V outlet with a 6-foot cord and NEMA 5-15P plug at 4 amps, is ETL listed and NSF rated, and carries Hobart's one-year parts, service and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527938445470,"sku":"HOB-EDGE13A-11","price":5605.97,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST (French)","offer_id":68056334368926,"sku":"HOB-EDGE13A - CSST","price":9728.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20EDGE13A-11_20qr_20.png?v=1790263407"},{"product_id":"hobart-edge13-centerline-edge-series-13-manual-slicer-medium-duty-1-2-hp-120v","title":"Hobart EDGE13 Centerline Edge Series 13\" Manual Slicer — Medium Duty, 1\/2 HP, 120V","description":"\u003cp\u003eSeven inches of slicing height under a 13-inch knife. The Centerline by Hobart EDGE13 takes tall product that a 12-inch machine turns away, such as a stacked pastrami round, a whole ham half or an 8.5-inch cheese wheel, and slices it on a medium-duty manual machine built for delis, restaurants and markets that run their slicer through the day in bursts rather than nonstop.\u003c\/p\u003e\u003cp\u003eA 1\/2 HP motor drives the knife through a Poly-V belt running at 300 rpm, with an aluminum knife-shaft pulley and steel motor pulley, and the enclosed motor turns on permanently lubricated ball bearings. The forged, hollow-ground carbon steel knife is chrome-plated to keep its edge, and the 45° product table leans product into the blade so each stroke takes less effort from your staff. The carriage handles product 9.5 inches wide by 7 inches high or 8.5 inches round, travels 11.5 inches, and the index knob sets slices anywhere from tissue-thin to 9\/16 inch. When the edge dulls, pull the top-mounted two-stone ceramic sharpener for 15 seconds and you are back to clean cuts.\u003c\/p\u003e\u003cp\u003eA no-volt release means the slicer stays off after a power interruption until someone restarts it, and the gauge-plate interlock keeps the carriage locked on unless the gauge plate is closed, and keeps the plate closed while the carriage is off. The permanent ring guard protects the edge during cleaning. The one-piece anodized aluminum base, removable carriage, tool-free product deflector and submersible sharpener make the nightly teardown quick. It measures 26.32 inches wide, 23.14 inches deep and 21.88 inches high, weighs 72 pounds, plugs into a standard 120V outlet with a 6-foot cord and NEMA 5-15P plug and draws 4 amps. ETL listed, NSF rated, with Hobart's one-year parts, service and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527938576542,"sku":"HOB-EDGE13-11","price":4009.99,"currency_code":"CAD","in_stock":true},{"title":"Quebec (CSST)","offer_id":68056328929438,"sku":"HOB-EDGE13 - CSST","price":6887.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20EDGE13-11_20ql_20.png?v=1790263417"},{"product_id":"hobart-edge14-centerline-edge-series-14-manual-slicer-medium-duty-1-2-hp-120v","title":"Hobart EDGE14 Centerline Edge Series 14\" Manual Slicer — Medium Duty, 1\/2 HP, 120V","description":"\u003cp\u003eThe biggest knife in the Edge Series: 14 inches, over a carriage that takes product 11 inches wide and 8.5 inches high. The Centerline by Hobart EDGE14 is the manual slicer for operations whose product is simply large, such as whole turkey breasts, top rounds, oversized cheese blocks and big heads of cabbage and lettuce, and whose daily slicing still fits a medium-duty machine.\u003c\/p\u003e\u003cp\u003eWidth is the payoff. An 11-inch carriage lets you lay a full roast or a wide cheese block down flat and slice it whole, so you are not trimming product to fit and throwing the trim into a lower-value use. A 1\/2 HP motor drives the knife through a Poly-V belt, and the enclosed motor runs on permanently lubricated ball bearings. The forged, hollow-ground carbon steel knife is chrome-plated for edge life, the 45° product table leans the load into the blade, and the index knob sets thickness from tissue-thin to 9\/16 inch. The top-mounted two-stone ceramic sharpener sharpens and hones in a 15-second pull.\u003c\/p\u003e\u003cp\u003eA no-volt release keeps the machine off after a power interruption until someone restarts it, the gauge-plate interlock holds the carriage in place unless the plate is closed over the edge, and the ring guard is permanently mounted. For cleaning, the carriage lifts off, the product deflector removes by hand, the sharpener lifts off its post and can be submerged, and the one-piece anodized aluminum base leaves little for residue to hide in. The EDGE14 measures 29.57 inches wide, 27.56 inches deep and 21.02 inches high, weighs 74 pounds and plugs into a standard 120V outlet with a 6-foot cord and NEMA 5-15P plug at 4 amps. ETL listed, NSF rated, with Hobart's one-year parts, service and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527939133598,"sku":"HOB-EDGE14-11","price":5414.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20EDGE14-11_20qr_20.png?v=1790263423"},{"product_id":"hobart-hs6-hs-series-13-manual-heavy-duty-slicer-removable-knife-1-2-hp-120v","title":"Hobart HS6 HS Series 13\" Manual Heavy-Duty Slicer, Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eA 13-inch cobalt-edged knife on a 1\/2 HP drive, and a knife that lifts out of the machine at close. The Hobart HS6 is a manual heavy-duty slicer rated for continuous use, built for delis, sandwich shops and meat counters that slice meat and cheese through every shift and cannot afford a machine that tears cheddar or dulls by Wednesday.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch.\u003c\/p\u003e\u003cp\u003eCleanup is where this configuration earns its keep. The 13-inch knife itself comes off: Hobart's patented removal tool locks onto the hub, the blade lifts out, and it goes into the sink or through the dish machine. The Zytel ring guard cover, the magnetically held stainless knife cover, the top-mounted sharpener and the meat grip all come off without tools, and the carriage tilts out of the way or lifts off completely. What is left is a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt runs on a standard 120V outlet, drawing 5.6 amps through a 6-foot cord with a molded NEMA 5-15P plug, so there is no electrician on the install. The HS6 measures 24-5\/8 inches wide, 26-3\/8 inches deep and 25-1\/2 inches tall and ships at 128 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, carries NSF and ETL marks, and is covered by Hobart's one-year parts and service warranty, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard (HS6-1)","offer_id":50527941525662,"sku":"HOB-HS6-1","price":11499.99,"currency_code":"CAD","in_stock":true},{"title":"With 10 lb Portion Scale (HS6-1PS)","offer_id":68088920473758,"sku":"HOB-HS6-1PS","price":20103.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS6_20qr_20.png?v=1790263605"},{"product_id":"hobart-hs6n-hs-series-13-manual-heavy-duty-slicer-non-removable-knife-1-2-hp-120v","title":"Hobart HS6N HS Series 13\" Manual Heavy-Duty Slicer, Non-Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eA 13-inch cobalt-edged knife that stays fixed on the machine, driven by a 1\/2 HP motor. The Hobart HS6N is the non-removable-knife version of Hobart's manual heavy-duty slicer, built for delis, kitchens and meat counters that clean the knife in place and would rather nobody on the crew ever carries a loose 13-inch blade to the sink.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch.\u003c\/p\u003e\u003cp\u003eThe knife stays on the machine, and the cleaning design is built around that. Lift off the Zytel ring guard cover and there is a 0.12-inch gap between the knife and the guard, enough to floss a folded towel all the way around the edge. The magnetically held stainless knife cover, the top-mounted sharpener and the meat grip come off without tools, and the carriage tilts out of the way or lifts off completely, leaving a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt runs on a standard 120V outlet, drawing 5.6 amps through a 6-foot cord with a molded NEMA 5-15P plug, so the install is a plug-in. The HS6N measures 24-5\/8 inches wide, 26-3\/8 inches deep and 25-1\/2 inches tall and ships at 128 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, carries NSF and ETL marks, and is covered by Hobart's one-year parts and service warranty, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527942246558,"sku":"HOB-HS6N-1","price":16181.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS6_20qr_20_16a26638-65ea-4e3f-b087-d6eb8ac1c873.png?v=1790263658"},{"product_id":"hobart-hs7-hs-series-13-automatic-heavy-duty-slicer-removable-knife-1-2-hp-120v","title":"Hobart HS7 HS Series 13\" Automatic Heavy-Duty Slicer, Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eFour carriage speeds and three stroke lengths, driving product across a 13-inch cobalt-edged knife while your deli clerk wraps the last order. The Hobart HS7 is an automatic heavy-duty slicer with a removable knife, built for delis, sandwich chains and supermarket counters that run volume slicing jobs all day and want the carriage doing the work instead of somebody's shoulder.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch. The automatic carriage runs at any of four speeds over three stroke lengths set from the front panel, so a short stroke on a small salami moves faster than a full-length pass on a whole ham.\u003c\/p\u003e\u003cp\u003eCleanup is where this configuration earns its keep. The 13-inch knife itself comes off: Hobart's patented removal tool locks onto the hub, the blade lifts out, and it goes into the sink or through the dish machine. The Zytel ring guard cover, the magnetically held stainless knife cover, the top-mounted sharpener and the meat grip all come off without tools, and the carriage tilts out of the way or lifts off completely. What is left is a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt runs on a standard 120V outlet, drawing 5.6 amps through a 6-foot cord with a molded NEMA 5-15P plug, so there is no electrician on the install. The HS7 measures 24-5\/8 inches wide, 26-3\/8 inches deep and 27-1\/4 inches tall and ships at 138 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, carries NSF and ETL marks, and is covered by Hobart's one-year parts and service warranty, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard (HS7-1)","offer_id":50527943032990,"sku":"HOB-HS7-1","price":26973.0,"currency_code":"CAD","in_stock":true},{"title":"With 10 lb Portion Scale (HS7-1PS)","offer_id":68088920899742,"sku":"HOB-HS7-1PS","price":29239.0,"currency_code":"CAD","in_stock":true},{"title":"With 10 lb Portion Scale, Quebec CSST (HS7-1P-CSST)","offer_id":68088920932510,"sku":"HOB-HS7-1P-CSST","price":30427.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS7_20qr_20_bd4c3be6-9f94-42f0-8c86-c9fc623a28f3.png?v=1790263669"},{"product_id":"hobart-hs6n-hv60c-hs-series-13-high-voltage-manual-slicer-220-240v-60-hz","title":"Hobart HS6N-HV60C HS Series 13\" High-Voltage Manual Slicer — 220-240V\/60 Hz","description":"\u003cp\u003eA heavy-duty manual slicer wired for 220-240V, 60 Hz power, with a fixed 13-inch cobalt-edged knife on a 1\/2 HP drive. The Hobart HS6N-HV60C is the high-voltage export version of the HS6N for 60 Hz grids, built for delis, hotels and meat counters on 220-240V service that want Hobart's heavy-duty HS slicer running on their own supply.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch.\u003c\/p\u003e\u003cp\u003eThe knife stays on the machine, and the cleaning design is built around that. Lift off the Zytel ring guard cover and there is a 0.12-inch gap between the knife and the guard, enough to floss a folded towel all the way around the edge. The magnetically held stainless knife cover, the top-mounted sharpener and the meat grip come off without tools, and the carriage tilts out of the way or lifts off completely, leaving a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt is rated 220-240V, 60 Hz single phase at 2.8 amps and ships with a 6-foot three-wire cord and no plug, so your electrician fits the plug your local code calls for. The HS6N-HV60C measures 24-5\/8 inches wide, 26-3\/8 inches deep and 25-1\/2 inches tall and ships at 128 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, is NSF rated, and is covered by Hobart's one-year parts and service coverage, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527945064606,"sku":"HOB-HS6N-HV60C","price":16706.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS6_20qr_20_8868c9ec-9b12-457e-aac1-de049a1acf1f.png?v=1790263695"},{"product_id":"hobart-hs6n-hv50c-hs-series-13-high-voltage-manual-slicer-220-240v-50-hz","title":"Hobart HS6N-HV50C HS Series 13\" High-Voltage Manual Slicer — 220-240V\/50 Hz","description":"\u003cp\u003eA heavy-duty manual slicer wired for 220-240V, 50 Hz power, with a fixed 13-inch cobalt-edged knife on a 1\/2 HP drive. The Hobart HS6N-HV50C is the high-voltage export version of the HS6N, built for delis, hotels and meat counters on 50 Hz supplies that want Hobart's heavy-duty HS slicer without running it through a transformer.\u003c\/p\u003e\u003cp\u003eThe 13-inch CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it to hold that edge two to three times longer than carbon-coated or plain stainless knives. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, which is enough to take cold provolone and dense ham through the blade clean instead of shredding them. When the edge does need attention, the top-mounted Borazon sharpener hones it in 15 seconds with one lever, and the knife stays shielded the whole time. The double-action index knob gives you fine control through its first full turn for shaved turkey and chipped beef, then opens the gauge plate quickly on the second turn for sandwich-thick cuts up to 1 inch.\u003c\/p\u003e\u003cp\u003eThe knife stays on the machine, and the cleaning design is built around that. Lift off the Zytel ring guard cover and there is a 0.12-inch gap between the knife and the guard, enough to floss a folded towel all the way around the edge. The magnetically held stainless knife cover, the top-mounted sharpener and the meat grip come off without tools, and the carriage tilts out of the way or lifts off completely, leaving a one-piece burnished aluminum base with no seams for product to hide in.\u003c\/p\u003e\u003cp\u003eIt is rated 220-240V, 50 Hz single phase at 2.8 amps and ships with a 6-foot three-wire cord and no plug, so your electrician fits the plug your local code calls for. The HS6N-HV50C measures 24-5\/8 inches wide, 26-3\/8 inches deep and 25-1\/2 inches tall and ships at 128 pounds. It takes product up to 5.75 by 10.75 inches or 7.5 inches round, is NSF rated, and is covered by Hobart's one-year parts and service coverage, knife included, with a lifetime guarantee on the Borazon stones. A full fence, food chute and debris deflector are available separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50527945097374,"sku":"HOB-HS6N-HV50C","price":16706.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS6_20qr_20_e92be25a-397d-4c8c-b44b-5c4e1b057e11.png?v=1790263697"},{"product_id":"hobart-hs9-hs-series-13-automatic-heavy-duty-slicer-removable-knife-1-2-hp-120v","title":"Hobart HS9 HS Series 13\" Automatic Heavy-Duty Slicer, Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eLoad a log, pick a speed and a stroke, and walk away to wrap the last order while the carriage keeps slicing. The Hobart HS9 is the automatic flagship of the HS Series: a 13-inch removable cobalt-edge knife, a four-speed automatic carriage with three stroke lengths, and six safety interlocks, built for delis, supermarkets and commissaries that slice by the pound, not by the sandwich.\u003c\/p\u003e\u003cp\u003eFront-mounted controls set the carriage speed and stroke length, and both can change mid-run. Short strokes speed up small products such as pepperoni or a half log of salami, long strokes clear a full ham, and a lever drops the carriage back to hand slicing for a quick one-off order. The CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge that Hobart rates at two to three times the life of carbon-coated or plain stainless knives, spun at 430 rpm by a 1\/2 HP motor through a poly-V belt. The double-action index knob gives fine first-turn control for shaved cuts and opens to 1-inch slices on the second, and the carriage takes product up to 5.75 by 10.75 inches or 7.5 inches round.\u003c\/p\u003e\u003cp\u003eAt close, the knife comes off with Hobart's patented removal tool with its edge covered and goes to the sink or dish machine. The carriage tilts and lifts off, the magnetic knife cover pulls straight off, the Zytel ring guard cover catches debris, and a gas assist spring holds the base up so you can clean underneath. The top-mounted Borazon sharpener hones in 15 seconds, lifts off for the warewasher and has lifetime-guaranteed stones. No-volt release, gauge plate interlock, 30-second shut-off, close-to-stop, home-to-start and a carriage system interlock keep the knife from running when it should not.\u003c\/p\u003e\u003cp\u003eThe HS9 runs on a standard 120V outlet at 5.6 amps through a 6-foot cord with a NEMA 5-15P plug. It needs 30-5\/16 inches of width for full carriage travel, 24-5\/8 inches of depth and 27-1\/4 inches of height, and ships at 142 pounds. The one-piece base is sanitary anodized aluminum with a stainless steel top cover, it is NSF certified and cETLus listed, and Hobart covers it for one year on parts and service, knife included.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527945490590,"sku":"HOB-HS9-1","price":29668.0,"currency_code":"CAD","in_stock":true},{"title":"CSST (Quebec)","offer_id":68056320082078,"sku":"HOB-HS9-1 - CSST","price":31620.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS9_20qr_20_26566eb2-a037-4a62-b3d0-b6e30e9eeae3.png?v=1790263714"},{"product_id":"hobart-hs8n-hs-series-13-manual-heavy-duty-slicer-non-removable-knife-1-2-hp-120v","title":"Hobart HS8N HS Series 13\" Manual Heavy-Duty Slicer, Non-Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eThe full six-interlock HS8 manual slicer with its 13-inch cobalt-edge knife fixed in place. The Hobart HS8N is for delis, sandwich shops and kitchens that want Hobart's heavy-duty manual platform but would rather nobody ever takes the blade off the machine: no removal tool to store or lose, and no 13-inch knife traveling to the sink in someone's hands.\u003c\/p\u003e\u003cp\u003eYou still get the CleanCut knife, 304L stainless with a Stellite cobalt-alloy edge that Hobart rates at two to three times the life of carbon-coated or plain stainless knives, so it stays sharp through a long day of cold cuts and cheese. A 1\/2 HP motor drives it at 430 rpm through a poly-V belt, with the torque to go through a chilled provolone log or a dense ham cleanly. The double-action index knob works in fine steps on its first turn for shaved and chipped cuts, opens the gauge plate quickly on the second turn for slices up to 1 inch, and holds its setting. The carriage accepts product up to 5.75 by 10.75 inches or 7.5 inches round.\u003c\/p\u003e\u003cp\u003eCleaning a fixed knife comes down to access, and the HS8N gives you plenty. Lift off the Zytel ring guard cover and there is a 0.12-inch gap between knife and guard for flossing out debris. The magnetic knife cover pulls straight off, the carriage tilts for a mid-shift wipe-down and removes completely at close, the meat grip comes off, and a cleaning leg holds the front of the base up so you can reach underneath. The edge stays covered during sharpening and cleaning, the top-mounted Borazon sharpener hones in 15 seconds and lifts off for the warewasher, and six interlocks (no-volt release, gauge plate interlock, 30-second shut-off, close-to-stop, home-to-start and carriage system interlock) stand between your crew and the knife.\u003c\/p\u003e\u003cp\u003eThe HS8N runs on a standard 120V outlet, drawing 5.4 amps through a 6-foot cord with a NEMA 5-15P plug. It needs 30-5\/16 inches of width for full carriage travel, 24-5\/8 inches of depth and 25-1\/2 inches of height, and it ships at 132 pounds. The base is one-piece sanitary anodized aluminum with a stainless top cover. NSF certified and cETLus listed, with Hobart's one-year parts and service coverage that includes the knife, and a lifetime guarantee on the sharpening stones.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527945621662,"sku":"HOB-HS8N-1","price":19146.0,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST","offer_id":68056309235870,"sku":"HOB-HS8N-1 - CSST","price":20314.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS8_20qr_20_0cede7dc-ccd0-4fc1-8f41-39b4bf587fc1.png?v=1790263746"},{"product_id":"hobart-hs8-hs-series-13-manual-heavy-duty-slicer-removable-knife-1-2-hp-120v","title":"Hobart HS8 HS Series 13\" Manual Heavy-Duty Slicer, Removable Knife — 1\/2 HP, 120V","description":"\u003cp\u003eA 13-inch knife that comes off the machine and goes through the dish machine, on a manual slicer that will not run unless six separate interlocks agree it is safe. The Hobart HS8 is the top manual model in the HS Series, built for delis, sandwich shops and busy kitchens that slice meat and cheese to order all day and get judged on how clean the slicer looks when the inspector lifts the knife cover.\u003c\/p\u003e\u003cp\u003eThe CleanCut knife is 304L stainless steel with a Stellite cobalt-alloy edge, and Hobart rates it at two to three times the life of carbon-coated or plain stainless knives. That means fewer trips to the sharpener, less steel ground away, and a thin, clean slice late into the afternoon. A 1\/2 HP motor turns it at 430 rpm through a poly-V belt, which is the torque you want when a cold provolone log or a dense ham hits the edge. The double-action index knob gives fine control on its first turn for shaved and chipped cuts, opens the gauge plate quickly on the second turn for slices up to 1 inch, and holds its setting so the tenth sandwich matches the first. The carriage takes product up to 5.75 by 10.75 inches, or 7.5 inches round.\u003c\/p\u003e\u003cp\u003eThe knife edge stays covered while your crew sharpens and cleans. The top-mounted Borazon sharpener sharpens and hones in one 15-second action, lifts off for the warewasher, and its two stones are guaranteed for life. With Hobart's patented removal tool the knife itself comes off edge-covered and goes to the sink or dish machine, so the area behind the blade actually gets cleaned. The carriage tilts for a mid-shift wipe-down and lifts off at close, the magnetic knife cover pulls straight off, the Zytel ring guard cover catches scraps before they pack in around the blade, and a cleaning leg props the front of the base up so you can reach underneath. No-volt release, gauge plate interlock, 30-second auto shut-off, close-to-stop, home-to-start and a carriage system interlock keep the knife from starting, or staying on, when it should not.\u003c\/p\u003e\u003cp\u003eThe HS8 plugs into a standard 120V outlet on a 6-foot cord with a NEMA 5-15P plug and draws 5.4 amps. Plan on 30-5\/16 inches of width for full carriage travel, 24-5\/8 inches of depth and 25-1\/2 inches of height. The one-piece base is sanitary anodized aluminum under a stainless steel top cover, it ships at 132 pounds, it is NSF certified and cETLus listed, and Hobart covers it for one year on parts and service, knife included. Full fence, food chute and debris deflector accessories are sold separately.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527945654430,"sku":"HOB-HS8-1","price":20958.0,"currency_code":"CAD","in_stock":true},{"title":"CSST (Quebec)","offer_id":68056312643742,"sku":"HOB-HS8-1 - CSST","price":22143.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Slicer_20HS8_20qr_20_ef7fe5c8-5aae-4f78-9efd-c7438da69ad9.png?v=1790263750"},{"product_id":"hobart-mg2032-mixer-grinder-200-lb-hopper-7-5-hp-grind-1-hp-mix-tandem-ready","title":"Hobart MG2032 Mixer-Grinder, 200 Lb Hopper — 7.5 HP Grind \/ 1 HP Mix, Tandem-Ready","description":"\u003cp\u003eTwo hundred pounds of meat in the hopper, mixed and ground by one machine. The Hobart MG2032 is the largest mixer-grinder in Hobart's meat room line, with a 7.5 HP grind motor and a separate 1 HP mix motor, built for supermarket meat departments, processors and commissaries that grind ground beef, sausage and blended product by the tub, not the lug.\u003c\/p\u003e\u003cp\u003eThe WEDGE cylinder grinding end keeps product feeding at full rate all the way to the bottom of a 200-pound batch, so the last pounds grind as consistently as the first. Front-mounted, water-resistant switches with magnetic contactors and dual-motor overload protection run mix-only or mix-and-grind, and the machine is ready for the optional pneumatic foot control. An optional right-side feed inlet lets the MG2032 run in tandem with a second mixer-grinder through a #32 adapter ring, and a bulker adapter for Hollymatic patty machines is available, so the MG2032 can anchor a full grinding and forming line. The end runs #32 knives and plates, sold separately.\u003c\/p\u003e\u003cp\u003eDouble-wall construction and a double-sealed push-button panel with a condensate heater are built for a wet meat room. The hopper is glass-bead-finished stainless steel angled toward the operator for loading, stainless panels enclose the base and motors, the lid is counterbalanced, and an electrical interlock shuts the motors off when the lid opens. The mixing arm, conveyor screw, cylinder and the hand-removable conveyor-screw and mix-arm seals all come out for cleaning.\u003c\/p\u003e\u003cp\u003eOrder it for 208V three-phase (30 amps rated) with an 8-foot cord and NEMA L15-30P plug, or 480V three-phase (15 amps rated) with an L16-20P plug; either needs a watertight receptacle in a Type FD conduit box. The MG2032 measures 26-7\/8 inches wide, 57 inches deep and 49-7\/8 inches tall with the lid closed (91-3\/4 inches open), and the grinding end discharges at 32-1\/2 inches, a comfortable height for lugs and carts. It carries UL and NSF marks and Hobart's one-year parts, labor and travel warranty.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Standard","offer_id":50527948177566,"sku":"HOB-MG2032-1","price":74244.0,"currency_code":"CAD","in_stock":true},{"title":"Quebec CSST (208V\/60\/3)","offer_id":68056326111390,"sku":"HOB-MG2032 - CSST","price":76904.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Mixer-Grinder_20MG2032_20Detail_20Cavity_20.png?v=1790263822"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/collections\/collection-meat-prep.png?v=1789062607","url":"https:\/\/directfoodequipment.com\/collections\/meat-prep.oembed","provider":"Direct Food Equipment","version":"1.0","type":"link"}