{"title":"Meat Grinder Accessories","description":"\u003cp\u003eMeat grinder accessories cover the parts that wear out or go missing first: stainless and plastic sausage spouts in ten, twenty and thirty millimeter diameters for stuffing links straight off the head, plastic stompers for feeding trim safely, replacement worms for mixer grinder attachments, and wax paper sheets for a hamburger press. Butcher shops, delis and restaurants grinding in house keep spares because one cracked spout stops a sausage run cold. Fitments are numbered by head size, so confirm the number on your machine before ordering and check \u003ca href=\"\/collections\/meat-grinder-plates\"\u003egrinder plates\u003c\/a\u003e and \u003ca href=\"\/collections\/meat-grinders\"\u003ecommercial meat grinders\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"eurodib-hf100p-hamburger-press-wax-paper-4-in-500-sheets-fits-hf100-hamburger-press","title":"Eurodib HF100P Hamburger Press Wax Paper, 4 in, 500 Sheets — Fits HF100 Hamburger Press","description":"\u003cp\u003eWax paper sheets for the Eurodib HF100 hamburger press, 500 to a pack. A sheet between the mold and the meat is what makes a pressed patty release in one piece instead of smearing, and it means the press wipes clean between patties rather than being scraped.\u003c\/p\u003e\u003cp\u003eSized to the HF100's 4 in mold and supplied in 500-sheet packs, so a busy patty station is stocked for a long run. Also lets you stack finished patties in the cooler without them fusing together.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48253721149598,"sku":"EUR-HF100P","price":21.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/paper_wax.jpg?v=1789748413"},{"product_id":"eurodib-hf130p-hamburger-press-wax-paper-500-sheets-fits-hf130-hamburger-press","title":"Eurodib HF130P Hamburger Press Wax Paper, 500 Sheets — Fits HF130 Hamburger Press","description":"\u003cp\u003eWax paper sheets for the Eurodib HF130 hamburger press, 500 to a pack. A sheet between the mold and the meat is what makes a pressed patty release whole instead of smearing, and it keeps the press clean enough to wipe rather than scrape between patties.\u003c\/p\u003e\u003cp\u003eThe 500-sheet pack keeps a patty station running through a full production shift, and the sheets double as dividers so finished patties stack in the cooler without fusing.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":48253721182366,"sku":"EUR-HF130P","price":23.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/paper_wax_1feb2f7d-25d4-4586-8003-b169f1d5c76e.jpg?v=1789748414"},{"product_id":"hobart-f101-fat-percentage-measuring-kit-for-ground-meat-10-to-40-fat-120v","title":"Hobart F101 Fat Percentage Measuring Kit for Ground Meat — 10% to 40% Fat, 120V","description":"\u003cp\u003eKnow the lean-to-fat ratio of every grind before it goes in the case. The Hobart F101 fat percentage measuring kit renders a 56.7-gram sample of ground meat and reads its fat content on a calibrated scale from 10% to 40%, with results repeatable within plus or minus 1% when run to Hobart's procedure. That is how a meat department proves the 80\/20 on the label is 80\/20, and how buyer and supplier settle a spec on the same test method.\u003c\/p\u003e\u003cp\u003eEverything travels in one portable case: the heater and timer, two funnels, three precision test tubes, two screens and two cleaning brushes. A bell-gong timer runs the heater and a pilot light goes out when the test is done. The kit plugs into a standard 120V outlet on a 5-15P cord and plug, draws 4.5 amps, weighs 21 pounds and carries Hobart's one-year warranty on parts, labor and mileage.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528882983070,"sku":"HOB-F101-1","price":7580.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fat_20Percentage_20Kit_20F101_20f_20.png?v=1790283839"},{"product_id":"hobart-00-875785-pneumatic-foot-switch-assembly-for-mg1532-mg2032-mixer-grinders","title":"Hobart 00-875785 Pneumatic Foot Switch Assembly for MG1532 \u0026 MG2032 Mixer-Grinders","description":"\u003cp\u003eRun the grinder with your foot and keep both hands on the product. The Hobart 00-875785 pneumatic foot switch assembly is the foot control for the MG1532 and MG2032 mixer-grinders: an air-actuated pedal on a 66-inch tube that signals the machine's controls, so the operator can feed and stop the grind without reaching for the panel.\u003c\/p\u003e\u003cp\u003eThe assembly includes the foot switch cover, pedal, air switch actuator, bumpers, stainless hardware, hose clamps and the 66-inch tubing and clamp assembly. Because it is air-operated, no electrical cord runs across the wet meat room floor.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528944390302,"sku":"HOB-FOOTSW","price":1308.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/i_d527484d-91c0-4fb6-bc77-6ad6ddacad5d.jpg?v=1791702171"},{"product_id":"hobart-00-108580-00002-32-stay-sharp-grinder-plate-1-8-holes-for-mg1532-mg2032-4246","title":"Hobart 00-108580-00002 #32 Stay-Sharp Grinder Plate, 1\/8\" Holes for MG1532, MG2032 \u0026 4246","description":"\u003cp\u003e1\/8-inch holes give you a fine grind: the classic final grind for ground beef and hamburger, and the plate Hobart rates its choppers' output through. The Hobart 00-108580-00002 is a #32 Stay-Sharp grinder plate, and it pairs with the Hobart #32 knife (00-479257) to cut meat cleanly at the plate instead of mashing it through. It fits the #32 grinding end on Hobart MG1532 and MG2032 mixer-grinders and the 4246 mixer-grinder, and the #32 heads on the 4146 grinder and 4732 and 4732A choppers.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-108580-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528955302046,"sku":"HOB-3246PLT-1\/8S","price":527.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/HOB00-108580-00002.gif?v=1794420838"},{"product_id":"hobart-00-108583-00002-32-stay-sharp-grinder-plate-3-8-holes-for-mg1532-mg2032-4246","title":"Hobart 00-108583-00002 #32 Stay-Sharp Grinder Plate, 3\/8\" Holes for MG1532, MG2032 \u0026 4246","description":"\u003cp\u003e3\/8-inch holes give you a coarse grind: a coarse grind for a first pass on trim before regrinding, and for coarse Italian and bratwurst-style sausage and chili. The Hobart 00-108583-00002 is a #32 Stay-Sharp grinder plate, and it pairs with the Hobart #32 knife (00-479257) to cut meat cleanly at the plate instead of mashing it through. It fits the #32 grinding end on Hobart MG1532 and MG2032 mixer-grinders and the 4246 mixer-grinder, and the #32 heads on the 4146 grinder and 4732 and 4732A choppers.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-108583-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528955990174,"sku":"HOB-3246PLT-3\/8S","price":527.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-00-108581-00002-32-stay-sharp-grinder-plate-3-16-holes-for-mg1532-mg2032-4246","title":"Hobart 00-108581-00002 #32 Stay-Sharp Grinder Plate, 3\/16\" Holes for MG1532, MG2032 \u0026 4246","description":"\u003cp\u003e3\/16-inch holes give you a medium-fine grind: a medium-fine grind for ground chuck, fresh pork sausage and meatloaf blends. The Hobart 00-108581-00002 is a #32 Stay-Sharp grinder plate, and it pairs with the Hobart #32 knife (00-479257) to cut meat cleanly at the plate instead of mashing it through. It fits the #32 grinding end on Hobart MG1532 and MG2032 mixer-grinders and the 4246 mixer-grinder, and the #32 heads on the 4146 grinder and 4732 and 4732A choppers.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-108581-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528956776606,"sku":"HOB-3246PLT-3\/16S","price":527.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-00-108582-00002-32-stay-sharp-grinder-plate-1-4-holes-for-mg1532-mg2032-4246","title":"Hobart 00-108582-00002 #32 Stay-Sharp Grinder Plate, 1\/4\" Holes for MG1532, MG2032 \u0026 4246","description":"\u003cp\u003e1\/4-inch holes give you a medium grind: a medium grind for breakfast and fresh sausage, ground pork and chili meat. The Hobart 00-108582-00002 is a #32 Stay-Sharp grinder plate, and it pairs with the Hobart #32 knife (00-479257) to cut meat cleanly at the plate instead of mashing it through. It fits the #32 grinding end on Hobart MG1532 and MG2032 mixer-grinders and the 4246 mixer-grinder, and the #32 heads on the 4146 grinder and 4732 and 4732A choppers.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-108582-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528959103134,"sku":"HOB-3246PLT-1\/4S","price":527.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-12plt-3-8s-12-3-8-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-3\/8S #12 3\/8\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eA coarse grind for chili and rustic sausage, or the first pass before regrinding. The Hobart 12PLT-3\/8S is a #12 Stay Sharp plate with 3\/8-inch holes for Hobart's #12 meat chopper attachments, sized for chili grind, rustic sausage and first-pass grinding before a finer plate.\u003c\/p\u003e\u003cp\u003eThe 3\/8-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 3\/8-inch plate comes in the 12 CE-5PLT kit and is sold here on its own. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this medium-coarse plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-3\/8S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528959332510,"sku":"HOB-12PLT-3\/8S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-3-8S.jpg?v=1791356376"},{"product_id":"hobart-12plt-1-8s-12-1-8-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-1\/8S #12 1\/8\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eThe fine grind most burgers and sausages start with. The Hobart 12PLT-1\/8S is a #12 Stay Sharp plate with 1\/8-inch holes for Hobart's #12 meat chopper attachments, sized for hamburger, fine sausage, meat loaf and meatballs.\u003c\/p\u003e\u003cp\u003eThe 1\/8-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 1\/8-inch plate ships in both the 12TIN-C\/EPAN and 12 CE-5PLT kits, so this listing is your spare. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this fine plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-1\/8S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528959791262,"sku":"HOB-12PLT-1\/8S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-1-8S.jpg?v=1791356378"},{"product_id":"hobart-12plt-3-16s-12-3-16-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-3\/16S #12 3\/16\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eOne step coarser than the factory plate, and the everyday ground-beef grind. The Hobart 12PLT-3\/16S is a #12 Stay Sharp plate with 3\/16-inch holes for Hobart's #12 meat chopper attachments, sized for ground beef, pork sausage, burger with more bite and taco meat.\u003c\/p\u003e\u003cp\u003eThe 3\/16-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 3\/16-inch plate comes in the 12 CE-5PLT kit and is sold here on its own. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this fine-to-medium plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-3\/16S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528959955102,"sku":"HOB-12PLT-3\/16S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-3-16S.jpg?v=1791356378"},{"product_id":"hobart-00-016430-00002-22-stay-sharp-grinder-plate-1-8-holes-for-4822-meat-chopper","title":"Hobart 00-016430-00002 #22 Stay-Sharp Grinder Plate, 1\/8\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e1\/8-inch holes give you a fine grind: the classic final grind for ground beef and hamburger, and the plate Hobart rates its choppers' output through. The Hobart 00-016430-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016430-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528960250014,"sku":"HOB-22PLT-1\/8S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-12plt-1-2s-12-1-2-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-1\/2S #12 1\/2\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eThe coarsest plate in the five-plate kit, for chunky grinds and first passes. The Hobart 12PLT-1\/2S is a #12 Stay Sharp plate with 1\/2-inch holes for Hobart's #12 meat chopper attachments, sized for coarse chili, chorizo-style sausage and first-pass grinding of trim.\u003c\/p\u003e\u003cp\u003eThe 1\/2-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 1\/2-inch plate comes in the 12 CE-5PLT kit and is sold here on its own. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this coarse plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-1\/2S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528961593502,"sku":"HOB-12PLT-1\/2S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-1-2S.jpg?v=1791356381"},{"product_id":"hobart-00-016433-00002-22-stay-sharp-grinder-plate-3-8-holes-for-4822-meat-chopper","title":"Hobart 00-016433-00002 #22 Stay-Sharp Grinder Plate, 3\/8\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e3\/8-inch holes give you a coarse grind: a coarse grind for a first pass on trim before regrinding, and for coarse Italian and bratwurst-style sausage and chili. The Hobart 00-016433-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016433-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528962642078,"sku":"HOB-22PLT-3\/8S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-12plt-11-16s-12-11-16-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-11\/16S #12 11\/16\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eThe largest-hole #12 Stay Sharp plate Hobart lists. The Hobart 12PLT-11\/16S is a #12 Stay Sharp plate with 11\/16-inch holes for Hobart's #12 meat chopper attachments, sized for the coarsest first-pass grinding of trim before regrinding, and very chunky chili or sausage.\u003c\/p\u003e\u003cp\u003eThe 11\/16-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 11\/16-inch plate is sold only on its own, outside the chopper kits. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this coarsest plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-11\/16S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528963068062,"sku":"HOB-12PLT-11\/16S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-11-16S.jpg?v=1791356382"},{"product_id":"hobart-12plt-1-4s-12-1-4-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-1\/4S #12 1\/4\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eThe medium grind for chili, sausage and meat sauces. The Hobart 12PLT-1\/4S is a #12 Stay Sharp plate with 1\/4-inch holes for Hobart's #12 meat chopper attachments, sized for chili, Italian and fresh sausage, meat sauce and coarser burger.\u003c\/p\u003e\u003cp\u003eThe 1\/4-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 1\/4-inch plate comes in the 12 CE-5PLT kit and is sold here on its own. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this medium plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-1\/4S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528963690654,"sku":"HOB-12PLT-1\/4S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-1-4S.jpg?v=1791356384"},{"product_id":"hobart-00-016431-00002-22-stay-sharp-grinder-plate-3-16-holes-for-4822-meat-chopper","title":"Hobart 00-016431-00002 #22 Stay-Sharp Grinder Plate, 3\/16\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e3\/16-inch holes give you a medium-fine grind: a medium-fine grind for ground chuck, fresh pork sausage and meatloaf blends. The Hobart 00-016431-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016431-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528965034142,"sku":"HOB-22PLT-3\/16S","price":323.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/i_b2c4aa95-b169-405e-bf8a-34fec584b6d0.jpg?v=1791702464"},{"product_id":"hobart-00-016437-00002-22-stay-sharp-grinder-plate-15-16-holes-for-4822-meat-chopper","title":"Hobart 00-016437-00002 #22 Stay-Sharp Grinder Plate, 15\/16\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e15\/16-inch holes give you a breaker grind: the largest-hole breaker plate for this grinding end, built for the first pass on chilled trim before any finer grind. The Hobart 00-016437-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016437-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528965197982,"sku":"HOB-22PLT-15\/16S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-00-016434-00002-22-stay-sharp-grinder-plate-1-2-holes-for-4822-meat-chopper","title":"Hobart 00-016434-00002 #22 Stay-Sharp Grinder Plate, 1\/2\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e1\/2-inch holes give you a extra-coarse grind: an extra-coarse grind for breaking down chilled trim on the first pass and for chunky chili and rustic sausage. The Hobart 00-016434-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016434-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528965525662,"sku":"HOB-22PLT-1\/2S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-12plt-5-8s-12-5-8-stay-sharp-grinder-plate-for-12-meat-chopper-attachments","title":"Hobart 12PLT-5\/8S #12 5\/8\" Stay Sharp Grinder Plate for #12 Meat Chopper Attachments","description":"\u003cp\u003eAn extra-coarse plate for first-pass grinding of large trim. The Hobart 12PLT-5\/8S is a #12 Stay Sharp plate with 5\/8-inch holes for Hobart's #12 meat chopper attachments, sized for first-pass grinding of large trim, extra-chunky chili and coarse sausage.\u003c\/p\u003e\u003cp\u003eThe 5\/8-inch plate mounts in the tinned chopping end in front of the #12 Stay Sharp knife and is held by the adjusting ring. This 5\/8-inch plate is sold only on its own, outside the chopper kits. Hobart's #12 Stay Sharp plates run from 1\/8 to 11\/16 inch, so this extra-coarse plate slots into a full range of grinds you can build around one chopper.\u003c\/p\u003e\u003cp\u003eThe 12PLT-5\/8S fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528965853342,"sku":"HOB-12PLT-5\/8S","price":281.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12PLT-5-8S.jpg?v=1791356387"},{"product_id":"hobart-00-103969-00002-22-stay-sharp-grinder-plate-5-8-holes-for-4822-meat-chopper","title":"Hobart 00-103969-00002 #22 Stay-Sharp Grinder Plate, 5\/8\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e5\/8-inch holes give you a breaker grind: a large-hole breaker plate for the first pass on chilled or tempered trim ahead of a finer grind. The Hobart 00-103969-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-103969-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528965951646,"sku":"HOB-22PLT-5\/8S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-12-22pn-sstrnd-12-round-stainless-feed-pan-for-12-meat-chopper-attachments","title":"Hobart 12\/22PN-SSTRND 12\" Round Stainless Feed Pan for #12 Meat Chopper Attachments","description":"\u003cp\u003eA 12-inch stainless tray that keeps meat moving into the chopper instead of piling up on the counter. The Hobart 12\/22PN-SSTRND is a round stainless steel feed pan, 12 inches across and 1-3\/4 inches deep, for Hobart's #12 meat chopper attachments.\u003c\/p\u003e\u003cp\u003eThe pan sits on the chopping end's cylinder so you can stage trimmed strips and push them down with the stomper. It is the same style of pan that comes with the 12TIN-C\/EPAN kit, which makes it a direct replacement, and it adds a feed pan to the 12 CE-5PLT kit, which ships without one.\u003c\/p\u003e\u003cp\u003eStainless steel wipes down and washes clean between proteins. It works with #12 chopping ends on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528966181022,"sku":"HOB-12\/22PN-SSTRND","price":436.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12-22PN-SSTRND.jpg?v=1791356389"},{"product_id":"hobart-00-016436-00002-22-stay-sharp-grinder-plate-3-4-holes-for-4822-meat-chopper","title":"Hobart 00-016436-00002 #22 Stay-Sharp Grinder Plate, 3\/4\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e3\/4-inch holes give you a breaker grind: a large-hole breaker plate for the first pass on chilled or tempered trim before the final grind. The Hobart 00-016436-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016436-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528966738078,"sku":"HOB-22PLT-3\/4S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-00-016432-00002-22-stay-sharp-grinder-plate-1-4-holes-for-4822-meat-chopper","title":"Hobart 00-016432-00002 #22 Stay-Sharp Grinder Plate, 1\/4\" Holes for 4822 Meat Chopper","description":"\u003cp\u003e1\/4-inch holes give you a medium grind: a medium grind for breakfast and fresh sausage, ground pork and chili meat. The Hobart 00-016432-00002 is a #22 Stay-Sharp grinder plate, and it pairs with the Hobart #22 knife (00-290372) to cut meat cleanly at the plate instead of mashing it through. It fits the #22 chopping end on the Hobart 4822 meat chopper, standard or FS.\u003c\/p\u003e\u003cp\u003eStay-Sharp plates are Hobart's hardened alloy steel grade: they hold an edge longer than standard carbon steel and take many more resharpenings, so the plate stays in service through more production before it needs replacing. Hobart also makes this size in carbon steel as part 00-016432-00001. Keep one plate per grind you run, and your crew can switch from a coarse first pass to a finished grind in the time it takes to back off the adjusting ring.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528967983262,"sku":"HOB-22PLT-1\/4S","price":323.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"hobart-00-478545-x-frame-rolling-lug-cart-for-mg1532-mg2032-mixer-grinders","title":"Hobart 00-478545 X-Frame Rolling Lug Cart for MG1532 \u0026 MG2032 Mixer-Grinders","description":"\u003cp\u003eFull lugs of trim and ground meat roll instead of getting carried with the Hobart 00-478545 X-frame lug cart. The cart is 304 stainless steel on 5-inch locking rubber casters and carries a lug between the cooler, the MG1532 or MG2032 mixer-grinder and the packaging line, then locks in place at the grinder while it fills.\u003c\/p\u003e\u003cp\u003eHobart rates it NSF and builds it on a rugged X-frame, so it takes the daily washdown of a production meat room. It is the lug cart Hobart offers on its MG1532\/2032 accessory sheet and lists in the MG #32 grinder unit parts list.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528970342558,"sku":"HOB-MXGD-CART","price":1973.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/webImg_MeatRoomAcc_XFrameLugCart.png?v=1791356393"},{"product_id":"hobart-00-479257-32-stay-sharp-grinder-knife-for-mg1532-mg2032-4246","title":"Hobart 00-479257 #32 Stay-Sharp Grinder Knife for MG1532, MG2032 \u0026 4246","description":"\u003cp\u003eA grind is only as clean as the knife behind the plate. The Hobart 00-479257 is the #32 Stay-Sharp knife that rides on the feed screw and shears meat across the face of every #32 plate, so fat cuts cleanly instead of smearing and the grind comes out bright. It fits the #32 grinding end on Hobart MG1532 and MG2032 mixer-grinders and the 4246, and the #32 heads on the 4146 grinder and 4732 and 4732A choppers, and it comes with the plate pin.\u003c\/p\u003e\u003cp\u003eStay-Sharp is Hobart's hardened alloy steel: it holds its edge longer than standard carbon steel and takes many more resharpenings. Run it against any hole size in the Hobart #32 plate range and keep a spare on the shelf so a dull knife never slows a production day.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528971849886,"sku":"HOB-3246KNF-STA\/SH","price":147.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/237529990.jpg?v=1794461963"},{"product_id":"hobart-12knf-sta-sh-12-stay-sharp-knife-for-12-meat-chopper-attachments","title":"Hobart 12KNF-STA\/SH #12 Stay Sharp Knife for #12 Meat Chopper Attachments","description":"\u003cp\u003eA dull knife smears fat and heats the meat; a fresh one cuts clean. The Hobart 12KNF-STA\/SH is the #12 Stay Sharp knife for Hobart's #12 meat chopper attachments, the same knife that ships in the 12TIN-C\/EPAN and 12 CE-5PLT kits.\u003c\/p\u003e\u003cp\u003eIt pairs with Hobart's #12 Stay Sharp plates from 1\/8 to 11\/16 inch and sits between the worm and the plate in the tinned chopping end. Keep a spare on the shelf and a worn knife never holds up a grinding day.\u003c\/p\u003e\u003cp\u003eIt fits Hobart #12 chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528971980958,"sku":"HOB-12KNF-STA\/SH","price":74.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12KNF-STA-SH.jpg?v=1791356398"},{"product_id":"hobart-00-478547-split-level-stainless-grinding-table-for-mg1532-mg2032-mixer-grinders","title":"Hobart 00-478547 Split Level Stainless Grinding Table for MG1532 \u0026 MG2032 Mixer-Grinders","description":"\u003cp\u003eTwo working levels at the discharge end of the grinder: trays up top, lugs down below. The Hobart 00-478547 split level grinding table is the stainless steel table Hobart offers with its MG1532 and MG2032 mixer-grinders, so ground product goes straight from the grinding head into a lug or onto a tray without anyone holding a tub at the plate.\u003c\/p\u003e\u003cp\u003eThe open stainless frame hoses and wipes down with the rest of the meat room, and the split height puts both the packaging tray and the bulk lug within reach of the operator at the head. Hobart lists it in the #32 grinder unit parts list for the MG1532 and MG2032.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528972013726,"sku":"HOB-MXGD-TBLSL","price":2823.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/webImg_MeatRoomAcc_GrindingTable.png?v=1790317196"},{"product_id":"hobart-12stf-sheep-12-sausage-stuffer-small-for-12-meat-chopper-attachments","title":"Hobart 12STF-SHEEP #12 Sausage Stuffer, Small, for #12 Meat Chopper Attachments","description":"\u003cp\u003eTurn the meat you just ground into slimmer links such as breakfast sausage on the same machine. The Hobart 12STF-SHEEP is the small #12 stuffer for Hobart's #12 meat chopper attachments, for slimmer links such as breakfast sausage.\u003c\/p\u003e\u003cp\u003eHobart offers two #12 stuffers: this small 12STF-SHEEP and the large 12STF-HOG. With the 12STF-SHEEP and the 12STF-HOG on the shelf, a kitchen that grinds its own sausage can case it in two sizes without buying a standalone stuffer.\u003c\/p\u003e\u003cp\u003eThe 12STF-SHEEP fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528973160606,"sku":"HOB-12STF-SHEEP","price":328.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12STF-SHEEP.jpg?v=1791356403"},{"product_id":"hobart-12stf-hog-12-sausage-stuffer-large-for-12-meat-chopper-attachments","title":"Hobart 12STF-HOG #12 Sausage Stuffer, Large, for #12 Meat Chopper Attachments","description":"\u003cp\u003eTurn the meat you just ground into larger-diameter links and sausages on the same machine. The Hobart 12STF-HOG is the large #12 stuffer for Hobart's #12 meat chopper attachments, for larger-diameter links and sausages.\u003c\/p\u003e\u003cp\u003eHobart offers two #12 stuffers: this large 12STF-HOG and the small 12STF-SHEEP. With the 12STF-HOG and the 12STF-SHEEP on the shelf, a kitchen that grinds its own sausage can case it in two sizes without buying a standalone stuffer.\u003c\/p\u003e\u003cp\u003eThe 12STF-HOG fits the 12TIN-C\/EPAN and 12 CE-5PLT chopping ends running on Legacy+ HL120 through HL662 mixers, #12-hub Hobart food cutters and PD35 or PD70 power drives.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528974471326,"sku":"HOB-12STF-HOG","price":242.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/hobart-12STF-HOG.jpg?v=1791356405"},{"product_id":"hobart-00-290372-22-stay-sharp-grinder-knife-for-4822-meat-chopper","title":"Hobart 00-290372 #22 Stay-Sharp Grinder Knife for 4822 Meat Chopper","description":"\u003cp\u003eA grind is only as clean as the knife behind the plate. The Hobart 00-290372 is the #22 Stay-Sharp knife that rides on the feed screw and shears meat across the face of every #22 plate, so fat cuts cleanly instead of smearing and the grind comes out bright. It is the Stay-Sharp chopper knife for the #22 chopping end on the Hobart 4822 meat chopper.\u003c\/p\u003e\u003cp\u003eStay-Sharp is Hobart's hardened alloy steel: it holds its edge longer than standard carbon steel and takes many more resharpenings. Run it against any hole size in the Hobart #22 plate range and keep a spare on the shelf so a dull knife never slows a production day.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528975454366,"sku":"HOB-22KNF-STA\/SH","price":102.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/237529936.jpg?v=1794461967"},{"product_id":"hobart-00-478649-stainless-hopper-side-board-for-mg1532-mg2032-mixer-grinders","title":"Hobart 00-478649 Stainless Hopper Side Board for MG1532 \u0026 MG2032 Mixer-Grinders","description":"\u003cp\u003eLoading a 150- or 200-pound hopper throws meat and juice over the side, and the Hobart 00-478649 side board catches it. This stainless steel hopper splash guard mounts along the hopper of the MG1532 or MG2032 mixer-grinder and keeps product inside the machine while your crew dumps lugs in and while the mixing arm turns.\u003c\/p\u003e\u003cp\u003eIt is the side board Hobart lists in the MG1532\/2032 accessories parts list and on the mixer-grinder accessory sheet, and it wipes down with the hopper at cleanup.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":50528976175262,"sku":"HOB-MXGD-SIDEBD","price":402.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/webImg_MeatRoomAcc_SideBoard.png?v=1790317227"},{"product_id":"eurodib-hm12n13-star-knife-12-meat-grinder-cutting-knife-for-hm12n","title":"Eurodib HM12N13 Star Knife, #12 Meat Grinder Cutting Knife — for HM12N","description":"\u003cp\u003eThe star knife is the part of a grinder that does the actual cutting, and it is the first thing to go when ground meat starts coming out smeared and warm. This is the Eurodib factory replacement for the Eurodib HM12N meat grinder — the same knife that ships in the HM12N head — so a dull edge turns into a five-minute swap instead of a slow, mushy grind.\u003c\/p\u003e\u003cp\u003eIt runs against the HM12N's #12 grinding plates, slicing meat cleanly at every hole instead of tearing it, which keeps fat distinct from lean and the texture of your burger and sausage blends where you want it. Keep one on the shelf and the grinder never sits idle waiting on a part.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM12N electric meat grinder and works with its 4.5 mm and 8 mm plates.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821942374558,"sku":"EUR-HM12N13","price":24.2,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm12n45-grinding-plate-4-5-mm-fine-grind-for-hm12n","title":"Eurodib HM12N45 Grinding Plate, 4.5 mm Fine Grind — for HM12N","description":"\u003cp\u003eSmall 4.5 mm holes for the fine, even grind that pâtés, emulsified sausages and smooth fillings need. This is Eurodib's factory 4.5 mm plate for the Eurodib HM12N meat grinder — drop it into the head, lock it down against the star knife and the HM12N turns out a tight, uniform texture batch after batch.\u003c\/p\u003e\u003cp\u003eMost kitchens run the HM12N on a coarser plate for burgers and switch to the 4.5 mm when a recipe needs a smooth bind or a second pass. Keeping both on hand means the texture on the menu never depends on which plate happens to be in the drawer, and a replacement is ready when an old plate gets nicked or worn.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM12N electric meat grinder (#12 head) and pairs with its 8 mm plate and HM12N13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821947125918,"sku":"EUR-HM12N45","price":30.66,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm12n8-grinding-plate-8-mm-medium-coarse-grind-for-hm12n","title":"Eurodib HM12N8 Grinding Plate, 8 mm Medium-Coarse Grind — for HM12N","description":"\u003cp\u003e8 mm holes, the burger-and-sausage plate. This is Eurodib's factory 8 mm grinding plate for the Eurodib HM12N meat grinder, sized for the medium-to-coarse grind that gives a burger patty some bite and fresh sausage a rustic, butcher-shop texture.\u003c\/p\u003e\u003cp\u003eGrinding your own blend from whole cuts lets you set the fat ratio and the freshness yourself, and the 8 mm plate is what most of that work runs through. Keep a spare so a nicked or worn plate never stops the morning grind, and swap to the HM12N 4.5 mm plate when a recipe calls for something finer.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM12N electric meat grinder (#12 head) and runs against its HM12N13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821955121310,"sku":"EUR-HM12N8","price":28.51,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm22a09-grinding-plate-15-mm-coarse-grind-for-hm22a","title":"Eurodib HM22A09 Grinding Plate, 15 mm Coarse Grind — for HM22A","description":"\u003cp\u003e15 mm holes — the biggest plate in the Eurodib HM22A lineup, for a coarse, chunky grind with real texture. Use it for artisan and country-style sausage, chili grind and coarse salami mixes, or as the first pass that breaks down large batches of trim before they go through a finer plate.\u003c\/p\u003e\u003cp\u003eRunning a first pass through a big plate is easier on the grinder and keeps the meat colder, because the auger is not forcing a full load through small holes in one go. This factory part is 82 mm across and made of stainless steel, sized for the HM22A's #22 head, so it seats flush against the star knife and holds the cut clean.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM22A electric meat grinder and works with its HM22A13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821961773214,"sku":"EUR-HM22A09","price":38.19,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm22a10-grinding-plate-10-mm-medium-coarse-grind-for-hm22a","title":"Eurodib HM22A10 Grinding Plate, 10 mm Medium-Coarse Grind — for HM22A","description":"\u003cp\u003e10 mm holes for a medium-coarse grind with visible texture — the plate behind steakhouse-style burgers, chili meat and hearty fresh sausage. This is Eurodib's factory 10 mm plate for the Eurodib HM22A meat grinder, one of the three plates the HM22A is built around.\u003c\/p\u003e\u003cp\u003eOn a 660 lb\/hr machine the plate is a wear part that sees a lot of meat, and a worn or nicked plate is where smearing and heat start. A replacement in the drawer keeps the HM22A cutting clean, and having the 10 mm alongside the 4.5 and 8 mm plates lets you cover three textures from one grinder.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM22A electric meat grinder (#22 head) and runs against its HM22A13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821968949406,"sku":"EUR-HM22A10","price":36.04,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm22a13-star-knife-22-meat-grinder-cutting-knife-for-hm22a","title":"Eurodib HM22A13 Star Knife, #22 Meat Grinder Cutting Knife — for HM22A","description":"\u003cp\u003eEvery plate on a grinder is only as good as the knife riding against it. This is Eurodib's factory replacement star knife for the Eurodib HM22A meat grinder — the cutting knife that sweeps the face of the plate on every turn of the auger — and it is the part that brings back a clean cut when the HM22A starts mashing meat through instead of slicing it.\u003c\/p\u003e\u003cp\u003eA sharp knife keeps fat and lean distinct, keeps the meat colder because the motor is not working against a dull edge, and keeps your yield up. On a grinder rated at 660 lb an hour, that edge wears with use; a spare on the shelf turns a worn knife into a quick swap at the end of a shift.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM22A electric meat grinder (#22 head) and works with its 4.5 mm, 8 mm, 10 mm and 15 mm plates.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821974487198,"sku":"EUR-HM22A13","price":30.66,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm22a45-grinding-plate-4-5-mm-fine-grind-for-hm22a","title":"Eurodib HM22A45 Grinding Plate, 4.5 mm Fine Grind — for HM22A","description":"\u003cp\u003eFine 4.5 mm holes for the smooth, uniform grind that breakfast sausage, pâtés, dumpling fillings and stuffing mixes need. This is Eurodib's factory 4.5 mm plate for the Eurodib HM22A meat grinder, the finest of the three standard plates the HM22A is built around.\u003c\/p\u003e\u003cp\u003eFine plates do the most work and clog first, so they are also the ones that get nicked and worn. Keeping a replacement ready means your fine products never have to come off the menu while you wait for a part, and running a coarse grind first and then a pass through the 4.5 mm gives you a smoother finish with less strain on the grinder.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM22A electric meat grinder (#22 head) and runs against its HM22A13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821981237406,"sku":"EUR-HM22A45","price":40.88,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-hm22a8-grinding-plate-8-mm-medium-coarse-grind-for-hm22a","title":"Eurodib HM22A8 Grinding Plate, 8 mm Medium-Coarse Grind — for HM22A","description":"\u003cp\u003e8 mm holes — the everyday plate for burger blends, ground beef and fresh sausage. This is Eurodib's factory 8 mm grinding plate for the Eurodib HM22A meat grinder, giving a medium-to-coarse grind with enough texture to keep a patty juicy and a sausage from turning pasty.\u003c\/p\u003e\u003cp\u003eOn a machine that can move 660 lb of meat an hour, the 8 mm plate sees most of the volume, and that is the plate that wears first. A replacement on the shelf keeps the grind clean and cold and keeps the HM22A from sitting idle over a damaged part.\u003c\/p\u003e\u003cp\u003eFits the Eurodib HM22A electric meat grinder (#22 head) and runs against its HM22A13 star knife.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67821989298334,"sku":"EUR-HM22A8","price":33.89,"currency_code":"CAD","in_stock":true}]},{"product_id":"eurodib-nmh12mm6-6-mm-grinding-plate-12-stainless-steel-for-hub12-m-grinder-attachment","title":"Eurodib NMH12MM6 6 mm Grinding Plate, #12 Stainless Steel — for HUB12 M Grinder Attachment","description":"\u003cp\u003eA 6 mm stainless steel grinding plate for the Eurodib HUB12 M #12 grinder attachment — the head that runs off the hub of the Eurodib M20B, M30AETL and M30AETL220 planetary mixers. It is the finer of the two plates that ship with the attachment, so a spare puts you back in production the moment the original wears, chips or goes missing in the dish pit.\u003c\/p\u003e\u003cp\u003eSix-millimeter holes give the tight, even grind you want for burgers, sausage and meatballs. Pair it with a sharp SKH12 star knife and the plate shears cleanly instead of smearing fat.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822185939102,"sku":"EUR-NMH12MM6","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/NMH12MM6.png?v=1793099895"},{"product_id":"eurodib-nmh12mm8-8-mm-grinding-plate-12-stainless-steel-for-hub12-m-grinder-attachment","title":"Eurodib NMH12MM8 8 mm Grinding Plate, #12 Stainless Steel — for HUB12 M Grinder Attachment","description":"\u003cp\u003eA 8 mm stainless steel grinding plate for the Eurodib HUB12 M #12 grinder attachment — the head that runs off the hub of the Eurodib M20B, M30AETL and M30AETL220 planetary mixers. It is the coarser of the two plates that ship with the attachment, so a spare puts you back in production the moment the original wears, chips or goes missing in the dish pit.\u003c\/p\u003e\u003cp\u003eEight-millimeter holes leave a coarser, chunkier texture for chili grind, rustic sausage and meat sauce. Pair it with a sharp SKH12 star knife and the plate shears cleanly instead of smearing fat.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822195540126,"sku":"EUR-NMH12MM8","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/NMH12MM8.png?v=1793099964"},{"product_id":"eurodib-nmh22mm6-6-mm-grinding-plate-22-stainless-steel-for-hub22-m-grinder-attachment","title":"Eurodib NMH22MM6 6 mm Grinding Plate, #22 Stainless Steel — for HUB22 M Grinder Attachment","description":"\u003cp\u003eA 6 mm stainless steel grinding plate for the Eurodib HUB22 M #22 grinder attachment — the head that runs off the hub of the Eurodib M40A220ETL and M60A220ETL planetary mixers. It is the finer of the two plates that ship with the attachment, so a spare puts you back in production the moment the original wears, chips or goes missing in the dish pit.\u003c\/p\u003e\u003cp\u003eSix-millimeter holes give the tight, even grind you want for burgers, sausage and meatballs. Pair it with a sharp SKH22 star knife and the plate shears cleanly instead of smearing fat.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822202552478,"sku":"EUR-NMH22MM6","price":59.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/NMH22MM6.png?v=1793100021"},{"product_id":"eurodib-nmh22mm8-8-mm-grinding-plate-22-stainless-steel-for-hub22-m-grinder-attachment","title":"Eurodib NMH22MM8 8 mm Grinding Plate, #22 Stainless Steel — for HUB22 M Grinder Attachment","description":"\u003cp\u003eA 8 mm stainless steel grinding plate for the Eurodib HUB22 M #22 grinder attachment — the head that runs off the hub of the Eurodib M40A220ETL and M60A220ETL planetary mixers. It is the coarser of the two plates that ship with the attachment, so a spare puts you back in production the moment the original wears, chips or goes missing in the dish pit.\u003c\/p\u003e\u003cp\u003eEight-millimeter holes leave a coarser, chunkier texture for chili grind, rustic sausage and meat sauce. Pair it with a sharp SKH22 star knife and the plate shears cleanly instead of smearing fat.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822209728670,"sku":"EUR-NMH22MM8","price":59.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/NMH22MM8.png?v=1793100062"},{"product_id":"eurodib-skh12-12-star-knife-stainless-steel-for-hub12-m-grinder-attachment","title":"Eurodib SKH12 #12 Star Knife, Stainless Steel — for HUB12 M Grinder Attachment","description":"\u003cp\u003eThe cutting half of your grind. The Eurodib SKH12 is the replacement star knife for the HUB12 M #12 meat grinder attachment that runs off the hub of the Eurodib M20B, M30AETL and M30AETL220 planetary mixers, and it is the part that decides whether meat is sheared cleanly against the plate or mashed through it.\u003c\/p\u003e\u003cp\u003eStainless steel and sized to the #12 head, it drops in behind either Eurodib plate — the NMH12MM6 and NMH12MM8 — with no fitting. Swap in a fresh knife when grinds start coming out pasty or the head starts to warm up, and the attachment cuts like new again.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822217822366,"sku":"EUR-SKH12","price":19.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/SKH12.png?v=1793100077"},{"product_id":"eurodib-skh22-22-star-knife-stainless-steel-for-hub22-m-grinder-attachment","title":"Eurodib SKH22 #22 Star Knife, Stainless Steel — for HUB22 M Grinder Attachment","description":"\u003cp\u003eThe cutting half of your grind. The Eurodib SKH22 is the replacement star knife for the HUB22 M #22 meat grinder attachment that runs off the hub of the Eurodib M40A220ETL and M60A220ETL planetary mixers, and it is the part that decides whether meat is sheared cleanly against the plate or mashed through it.\u003c\/p\u003e\u003cp\u003eStainless steel and sized to the #22 head, it drops in behind either Eurodib plate — the NMH22MM6 and NMH22MM8 — with no fitting. Swap in a fresh knife when grinds start coming out pasty or the head starts to warm up, and the attachment cuts like new again.\u003c\/p\u003e","brand":"Eurodib","offers":[{"title":"Default Title","offer_id":67822224965790,"sku":"EUR-SKH22","price":24.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/SKH22.png?v=1793100089"},{"product_id":"hobart-22c-e-5plt-22-chopping-end-with-knife-5-plates-for-4822-meat-chopper","title":"Hobart 22C\/E-5PLT #22 Chopping End with Knife \u0026 5 Plates for 4822 Meat Chopper","description":"\u003cp\u003eA complete #22 chopping end with knife and five grinding plates, ready to go on a Hobart 4822 meat chopper. Keep it as a spare so grinding keeps going while the first end is in the sink, or use it to put a full range of plate sizes at the chopper in one order.\u003c\/p\u003e\u003cp\u003eThe 4822 is built around Hobart's protective-type chopping end with a spiral-fluted cylinder and heavily tinned cylinder, worm and adjusting ring. Switching between a coarse first grind and a fine second grind is just a plate change.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":68055955701918,"sku":"HOB-22C\/E-5PLT","price":2919.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1412139.jpg?v=1794894628"},{"product_id":"hobart-46end-5plt-46-tinned-grinder-end-with-stomper-knife-5-plates-for-4146-meat-grinder","title":"Hobart 46END-5PLT #46 Tinned Grinder End with Stomper, Knife \u0026 5 Plates for 4146 Meat Grinder","description":"\u003cp\u003eA complete #46 grinding end for the Hobart 4146 floor grinder, with stomper, knife and five plates. The 4146 pushes 60 to 65 pounds of beef a minute on first cutting through its wide-mouth end, and a spare end keeps that capacity working while the first one is in the sink.\u003c\/p\u003e\u003cp\u003eThe grinding end is heavily tinned, the same construction as the end that ships on the machine. Five plates give you the hole sizes for first and second grinds.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":68055955800222,"sku":"HOB-46END-5PLT","price":4266.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/60419.jpg?v=1794894629"},{"product_id":"hobart-46pan-tinr-h-tinned-feed-pan-for-4146-meat-grinder-right-to-left","title":"Hobart 46PAN-TINR\/H Tinned Feed Pan for 4146 Meat Grinder — Right to Left","description":"\u003cp\u003eThe tinned feed pan for the Hobart 4146 floor grinder, in the right-to-left configuration. It is the 14-gauge tinned steel pan the 4146 ships with, giving the operator a large staging surface to load the #46 wide-mouth end.\u003c\/p\u003e\u003cp\u003eOrder it to replace a worn or damaged pan and keep the grinder working the way it left the factory.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":68055955832990,"sku":"HOB-46PAN-TINR\/H","price":4211.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/62639.jpg?v=1794894629"},{"product_id":"hobart-46pan-sstr-h-stainless-steel-feed-pan-for-4146-meat-grinder-right-to-left","title":"Hobart 46PAN-SSTR\/H Stainless Steel Feed Pan for 4146 Meat Grinder — Right to Left","description":"\u003cp\u003eA 14-gauge stainless steel feed pan for the Hobart 4146 floor grinder, in the right-to-left configuration. Hobart ships the 4146 with a tinned steel pan and offers stainless as the upgrade for meat rooms that wash down hard every day.\u003c\/p\u003e\u003cp\u003eStainless resists corrosion from daily cleaning and sanitizing, so the pan stays sanitary longer in a busy meat room.\u003c\/p\u003e","brand":"Hobart","offers":[{"title":"Default Title","offer_id":68055955996830,"sku":"HOB-46PAN-SSTR\/H","price":5034.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/4722.jpg?v=1794894630"}],"url":"https:\/\/directfoodequipment.com\/collections\/meat-grinder-accessories.oembed?page=3","provider":"Direct Food Equipment","version":"1.0","type":"link"}