Free shipping on most orders over $199.
We offer a 30-day peace of mind return policy. See details.
Call, Live Chat, or Email us for free support.
Free shipping on most orders over $199.
We offer a 30-day peace of mind return policy. See details.
Call, Live Chat, or Email us for free support.
Fagor is trusted in kitchens at
Product Overview
Description
Two doors, 18.6 cu ft, and 67-1/4" of counter run — the Fagor SUR-67 is the middle cabinet of the deep undercounter series and the one that carries most of a single station's cold inventory. The 30" cabinet height keeps it under the work surface, and the compressor breathes out the right side rather than the back, so the unit can sit tight against a wall with no rear air gap.
18.6 cu ft sits behind two solid doors, and four epoxy-coated wire shelves come in the box — two per door section, riding on channel slides that adjust in 2" increments. The same rails will carry 12" x 20" food pans instead of shelves, four of them across the cabinet, which is what most kitchens actually do with a 67-1/4" unit on a prep line. The doors are stainless on both faces with an in-step design that adds insulation and shields the gasket from cart traffic, close themselves, and hold a 120° stay-open detent while you load.
The cabinet is built from heavy-duty stainless steel inside and out, with the floor coved into the corners to NSF requirements so it wipes clean in one pass. Two inches of Ecomate R5 foam, CFC-free polyurethane, foamed in place, sit between the stainless skins; the back panel is galvanized steel; and plastic breaker strips at the openings keep condensate from forming around the frames.
A 1/3 HP compressor sits in the right-hand end of the cabinet and vents through the side, so the unit can be built in between neighbors or pushed back against a wall without choking. The self-contained capillary tube circuit runs on R-290, a natural hydrocarbon refrigerant, and is factory balanced for 33°F to 38°F. Above the product, a stainless-encased evaporator coil mounted to the interior top panel and a large fan motor with oversized blades keep the air turning over instead of stratifying.
The cabinet measures 30" tall — the low-profile build in the family, 6" under the matching SWR-67 worktop version, sized to tuck under an existing counter — and 32-1/2" deep before the 1" bumper. It is 67-1/4" wide overall and draws 3.0 amps at 115 volts through a 1/3 HP compressor, arriving with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Five-inch casters are standard with brakes on the front pair, so a 345 lb cabinet still rolls out for cleaning; 6" adjustable legs and 3" casters are available if the installation calls for a different height. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and is covered by a 3-year parts and labor warranty plus 2 additional years on the compressor.
- Ships with: 4 epoxy-coated wire shelves (2 per door section), adjustable in 2" increments; 8' power cord with NEMA 5-15P plug; 5" casters, front two with brakes
- Options: 6" adjustable legs (set of 4); 3" casters (set of 4, front two with locking clips); additional epoxy-coated shelves; universal tray slides; 220V / 50 Hz / 1 phase build
- Configuration: 2 doors across 2 sections, 18.6 cu ft, 67-1/4" x 32-1/2" x 30" cabinet
Features
Key Benefits
Typical Uses & Applications
Care and Usage

















