{"title":"Bar Refrigeration","description":"\u003cp\u003eBar refrigeration keeps beer, mixers, wine, and garnishes cold within a step of the well, so bartenders are not leaving the station mid-round. This category spans glass and solid door back bar coolers in roughly 49\" to 73\" widths, slim-line depths for narrow back bars, and direct draw keg boxes for draft service. Bars, restaurants, and banquet rooms size the run to their back bar wall and their best-selling products. Compare \u003ca href=\"\/collections\/back-bar-glass-refrigerators\"\u003eglass door back bar coolers\u003c\/a\u003e for merchandising, \u003ca href=\"\/collections\/back-bar-solid-refrigerators\"\u003esolid door models\u003c\/a\u003e for insulation, or \u003ca href=\"\/collections\/direct-draw-beer-coolers\"\u003edirect draw beer coolers\u003c\/a\u003e for draft.\u003c\/p\u003e","products":[{"product_id":"fagor-fbb-36-n-back-bar-refrigerator-one-solid-door-36-3-4-wide","title":"Fagor FBB-36-N Back Bar Refrigerator, One Solid Door — 36-3\/4\" Wide","description":"\u003cp\u003eThe FBB-36-N is the one-door build in Fagor's Next Generation back bar line, and it is the cabinet to reach for when there is exactly one gap left in the bar. It measures 36-3\/4\" wide, 29\" deep and 36-7\/8\" tall, swallows 430 twelve-ounce cans, 254 bottles or two kegs, and breathes entirely out the front — so it can sit inside a run of millwork with the neighboring cabinets hard against both sides and still hold temperature on a 100°F night.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 430 twelve-ounce cans, 254 twelve-ounce bottles, or 2 kegs. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/10 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 solid door, black vinyl exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257127415966,"sku":"GBS-FBB-36-N","price":4493.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1607eb67-a011-08d0-d81c-b1b7019f28b7.jpg?v=1789748502"},{"product_id":"fagor-fbb-36g-n-back-bar-refrigerator-one-glass-door-36-3-4-wide","title":"Fagor FBB-36G-N Back Bar Refrigerator, One Glass Door — 36-3\/4\" Wide","description":"\u003cp\u003eSwap the solid door for dual pane glass in a black frame and the 36-3\/4\" FBB-36G-N stops being storage and starts being display. The same 430-can, 254-bottle, two-keg cabinet is now lit from an LED strip under the mullion, locked, and readable from across the room — which is what sells the fourth beer to a guest who was only going to have three.\u003c\/p\u003e\u003cp\u003eCount it in kegs and two fit; count it in bottles and it is 254; count it in twelve-ounce cans and it is 430. Fagor publishes all three because no two bars count stock the same way. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/10 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. Electrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 dual pane glass door, black vinyl exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257128628382,"sku":"GBS-FBB-36G-N","price":4659.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1f743cd3-2390-5642-9c35-e86e6f161e9c.jpg?v=1789748507"},{"product_id":"fagor-fbb-36s-n-stainless-back-bar-refrigerator-one-solid-door-36-3-4-wide","title":"Fagor FBB-36S-N Stainless Back Bar Refrigerator, One Solid Door — 36-3\/4\" Wide","description":"\u003cp\u003eThe FBB-36S-N is the 36-3\/4\" single-door back bar cabinet built with a stainless steel front and sides instead of the black vinyl of the base model. Everything behind the skin is identical — 430 twelve-ounce cans, 254 bottles, two kegs, front-breathing 1\/10 HP refrigeration — but the stainless exterior is what lets it live in an open service area, a hotel lobby bar or a stadium concourse where the cabinet is part of the finish schedule.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 430 twelve-ounce cans, 254 twelve-ounce bottles, or 2 kegs. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/10 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 solid door, stainless steel exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257129316510,"sku":"GBS-FBB-36S-N","price":5257.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Series-115V-36_75-Stainless-Steel-Singe-Solid-Door-Back-Bar-Refrigerator-FBB-36S-N.jpg?v=1791295852"},{"product_id":"fagor-fbb-36gs-n-stainless-back-bar-refrigerator-one-glass-door-36-3-4-wide","title":"Fagor FBB-36GS-N Stainless Back Bar Refrigerator, One Glass Door — 36-3\/4\" Wide","description":"\u003cp\u003eThe FBB-36GS-N combines the two upgrades in the Next Generation back bar line at the smallest size: a stainless steel front and sides, and a single dual pane glass door set in an aluminum frame rather than the black frame used on the standard glass model. The result is a 36-3\/4\" lit display cabinet finished entirely in metal and glass, holding 430 twelve-ounce cans or two kegs.\u003c\/p\u003e\u003cp\u003eCount it in kegs and two fit; count it in bottles and it is 254; count it in twelve-ounce cans and it is 430. Fagor publishes all three because no two bars count stock the same way. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are dual pane glass in aluminum frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/10 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 dual pane glass door, stainless steel exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257130201246,"sku":"GBS-FBB-36GS-N","price":5451.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Series-115V-36_75-Stainless-Steel-Single-Glass-Door-Back-Bar-Refrigerator-FBB-36GS-N.jpg?v=1791295855"},{"product_id":"fagor-fbb-59-n-back-bar-refrigerator-two-solid-doors-59-1-2-wide","title":"Fagor FBB-59-N Back Bar Refrigerator, Two Solid Doors — 59-1\/2\" Wide","description":"\u003cp\u003eTwo solid doors across 59-1\/2\" make the FBB-59-N the everyday workhorse of the Next Generation back bar line. It carries 852 twelve-ounce cans, 486 bottles or three kegs, which is roughly double what the single-door FBB-36-N holds for 23\" more bar — the point at which most operators stop restocking mid-shift and start restocking once a day.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 852 twelve-ounce cans, or 486 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257130594462,"sku":"GBS-FBB-59-N","price":4728.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/8883cd83-1d7b-2610-702c-3d19e49f14bb.jpg?v=1789748518"},{"product_id":"fagor-fbb-59g-n-back-bar-refrigerator-two-glass-doors-59-1-2-wide","title":"Fagor FBB-59G-N Back Bar Refrigerator, Two Glass Doors — 59-1\/2\" Wide","description":"\u003cp\u003eThe FBB-59G-N shows what it is selling. Two dual pane glass doors in black frames span 59-1\/2\" and put 852 twelve-ounce cans and 486 bottles on view behind lockable glass, lit from under the mullion. Bottle rails on one door keep the labels facing out; flat shelves on the other take the cases that do not need to be seen.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 852 twelve-ounce cans across 2 doors is roughly 426 cans a section, alongside a published 486 bottles or 3 kegs for the whole cabinet. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, black vinyl exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257134461086,"sku":"GBS-FBB-59G-N","price":4978.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/6e610856-e53b-99dd-1bed-8d5ea1817575.jpg?v=1789748521"},{"product_id":"fagor-fbb-59s-n-stainless-back-bar-refrigerator-two-solid-doors-59-1-2-wide","title":"Fagor FBB-59S-N Stainless Back Bar Refrigerator, Two Solid Doors — 59-1\/2\" Wide","description":"\u003cp\u003eTwo solid stainless doors across 59-1\/2\" give the FBB-59S-N a front that reads as kitchen equipment rather than bar millwork, which is exactly what is wanted when the cabinet sits in the open. Capacity matches the black vinyl FBB-59-N to the can: 852 twelve-ounce cans, 486 bottles or three kegs, four adjustable shelves, one 115V circuit.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 852 twelve-ounce cans, or 486 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, stainless steel exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257135673502,"sku":"GBS-FBB-59S-N","price":5531.25,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-59gs-n-stainless-back-bar-refrigerator-two-glass-doors-59-1-2-wide","title":"Fagor FBB-59GS-N Stainless Back Bar Refrigerator, Two Glass Doors — 59-1\/2\" Wide","description":"\u003cp\u003eTwo dual pane glass doors in aluminum frames, set into a stainless front and sides — the FBB-59GS-N is the most finished-looking cabinet at 59-1\/2\" that Fagor builds for a back bar. Behind the glass it is the same 852-can, 486-bottle, three-keg box as the rest of the 59 family, lit from an LED under the mullion and locked door by door.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 852 twelve-ounce cans across 2 doors is roughly 426 cans a section, alongside a published 486 bottles or 3 kegs for the whole cabinet. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are dual pane glass in aluminum frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, stainless steel exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257139081374,"sku":"GBS-FBB-59GS-N","price":5826.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-69-n-back-bar-refrigerator-two-solid-doors-69-1-2-wide","title":"Fagor FBB-69-N Back Bar Refrigerator, Two Solid Doors — 69-1\/2\" Wide","description":"\u003cp\u003eThe FBB-69-N buys capacity without buying a third door swing. It is 10\" wider than the FBB-59-N and still runs two doors, and that 10\" is worth 162 more cans: 1,014 twelve-ounce cans, 594 bottles or three kegs behind a pair of solid black vinyl doors. In a well where every door that opens into the aisle costs the bartender a step, the widest two-door cabinet in the line is often the right answer.\u003c\/p\u003e\u003cp\u003eCount it in kegs and three fit; count it in bottles and it is 594; count it in twelve-ounce cans and it is 1,014. Fagor publishes all three because no two bars count stock the same way. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257139802270,"sku":"GBS-FBB-69-N","price":5189.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/727fce02-610f-99b1-fd63-2b0aa1b4af01.jpg?v=1789748531"},{"product_id":"fagor-fbb-69g-n-back-bar-refrigerator-two-glass-doors-69-1-2-wide","title":"Fagor FBB-69G-N Back Bar Refrigerator, Two Glass Doors — 69-1\/2\" Wide","description":"\u003cp\u003e1,014 twelve-ounce cans behind two lit glass doors is the FBB-69G-N's whole argument. At 69-1\/2\" it is the widest two-door glass cabinet Fagor builds in this line, which means an uninterrupted 69-1\/2\" run of merchandising with only one mullion breaking it up — a cleaner display face than a three-door cabinet of similar width.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,014 twelve-ounce cans, 594 twelve-ounce bottles, or 3 kegs. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, black vinyl exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257140490398,"sku":"GBS-FBB-69G-N","price":5550.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1a1f1db0-69b6-466f-997f-e0843a35c91b.jpg?v=1789748534"},{"product_id":"fagor-fbb-69s-n-stainless-back-bar-refrigerator-two-solid-doors-69-1-2-wide","title":"Fagor FBB-69S-N Stainless Back Bar Refrigerator, Two Solid Doors — 69-1\/2\" Wide","description":"\u003cp\u003eThe FBB-69S-N puts a stainless front and sides on the widest two-door cabinet in the line. 69-1\/2\" wide, 1,014 twelve-ounce cans, 594 bottles, three kegs — and an exterior that wipes down with a bar rag and does not scuff the way a vinyl panel does when kegs and cases go past it a hundred times a shift.\u003c\/p\u003e\u003cp\u003eCount it in kegs and three fit; count it in bottles and it is 594; count it in twelve-ounce cans and it is 1,014. Fagor publishes all three because no two bars count stock the same way. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, stainless steel exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257140916382,"sku":"GBS-FBB-69S-N","price":6069.75,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-69gs-n-stainless-back-bar-refrigerator-two-glass-doors-69-1-2-wide","title":"Fagor FBB-69GS-N Stainless Back Bar Refrigerator, Two Glass Doors — 69-1\/2\" Wide","description":"\u003cp\u003eThe FBB-69GS-N is the widest two-door glass cabinet in the line dressed in stainless and aluminum: 69-1\/2\" of display face broken by a single mullion, 1,014 twelve-ounce cans and 594 bottles behind dual pane glass. Where a black-framed glass door disappears into a dark bar back, the aluminum frame and stainless surround read deliberately, which is why this build turns up in hotel and casino specifications.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,014 twelve-ounce cans, 594 twelve-ounce bottles, or 3 kegs. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are dual pane glass in aluminum frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, stainless steel exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257142915230,"sku":"GBS-FBB-69GS-N","price":6493.5,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-79-n-back-bar-refrigerator-three-solid-doors-80-wide","title":"Fagor FBB-79-N Back Bar Refrigerator, Three Solid Doors — 80\" Wide","description":"\u003cp\u003eThree solid doors and a cabinet that measures a true 80\" wide put the FBB-79-N in the service well of a bar that runs hard. Behind the doors sit 1,092 twelve-ounce cans, 702 bottles or four kegs, split across three sections so two bartenders can work opposite ends of the same cabinet without reaching over each other.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 1,092 twelve-ounce cans across 3 doors is roughly 364 cans a section, alongside a published 702 bottles or 4 kegs for the whole cabinet. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257145667742,"sku":"GBS-FBB-79-N","price":5894.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/dffc9ab0-c72a-a898-71d7-1e19792eba07.jpg?v=1789748543"},{"product_id":"fagor-fbb-79g-n-back-bar-refrigerator-three-glass-doors-80-wide","title":"Fagor FBB-79G-N Back Bar Refrigerator, Three Glass Doors — 80\" Wide","description":"\u003cp\u003eThree dual pane glass doors across an 80\" cabinet turn the FBB-79G-N into the back wall of the bar rather than something hidden under it. It holds 1,092 twelve-ounce cans, 702 bottles or four kegs, and every one of them is lit, locked and visible without a bartender opening a door to check what is left.\u003c\/p\u003e\u003cp\u003eSix adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 1,092 twelve-ounce cans, or 702 bottles, or 4 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 dual pane glass doors, black vinyl exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257148813470,"sku":"GBS-FBB-79G-N","price":6471.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/f53fabf9-fc1b-8456-802b-68365eb47635.jpg?v=1789748546"},{"product_id":"fagor-fbb-79s-n-stainless-back-bar-refrigerator-three-solid-doors-80-wide","title":"Fagor FBB-79S-N Stainless Back Bar Refrigerator, Three Solid Doors — 80\" Wide","description":"\u003cp\u003eThree solid stainless doors on an 80\" cabinet make the FBB-79S-N the specification for open-plan bars and back-of-house service wells that are visible from the floor. It holds 1,092 twelve-ounce cans, 702 bottles or four kegs across three sections, on six adjustable shelves, drawing 3.0 amps from an ordinary outlet.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 1,092 twelve-ounce cans across 3 doors is roughly 364 cans a section, alongside a published 702 bottles or 4 kegs for the whole cabinet. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, stainless steel exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257149567134,"sku":"GBS-FBB-79S-N","price":6897.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-79gs-n-stainless-back-bar-refrigerator-three-glass-doors-80-wide","title":"Fagor FBB-79GS-N Stainless Back Bar Refrigerator, Three Glass Doors — 80\" Wide","description":"\u003cp\u003eThree aluminum-framed dual pane glass doors across an 80\" stainless cabinet make the FBB-79GS-N a piece of front-of-house equipment. It stores 1,092 twelve-ounce cans, 702 bottles or four kegs on six adjustable shelves, all of it lit and visible, all of it lockable, and none of it needing rear clearance because the whole unit breathes out the front.\u003c\/p\u003e\u003cp\u003eSix adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 1,092 twelve-ounce cans, or 702 bottles, or 4 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are dual pane glass in aluminum frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 dual pane glass doors, stainless steel exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257149894814,"sku":"GBS-FBB-79GS-N","price":7572.75,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-95-n-back-bar-refrigerator-three-solid-doors-95-1-2-wide","title":"Fagor FBB-95-N Back Bar Refrigerator, Three Solid Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95-N is the largest cabinet Fagor builds in the Next Generation back bar line: 95-1\/2\" of three-door, solid-front storage holding 1,302 twelve-ounce cans, 864 bottles or five kegs. That is a full Friday night of bottled and canned stock in one cabinet, on one 3.0-amp circuit, with one compressor to service instead of two units to keep in step.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,302 twelve-ounce cans, 864 twelve-ounce bottles, or 5 kegs. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257150582942,"sku":"GBS-FBB-95-N","price":6091.5,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-95g-n-back-bar-refrigerator-three-glass-doors-95-1-2-wide","title":"Fagor FBB-95G-N Back Bar Refrigerator, Three Glass Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95G-N is the full-length glass build in the Next Generation line: 95-1\/2\" wide, three dual pane glass doors in black frames, and 1,302 twelve-ounce cans or 864 bottles behind them. It is the cabinet specified when the back bar itself is the merchandising, and it does the job of two smaller coolers on a single 1\/3 HP system.\u003c\/p\u003e\u003cp\u003eCount it in kegs and five fit; count it in bottles and it is 864; count it in twelve-ounce cans and it is 1,302. Fagor publishes all three because no two bars count stock the same way. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 dual pane glass doors, black vinyl exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257151500446,"sku":"GBS-FBB-95G-N","price":6784.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ebb74510-28ad-cf93-8605-04553d0a5095.jpg?v=1789748555"},{"product_id":"fagor-fbb-95s-n-stainless-back-bar-refrigerator-three-solid-doors-95-1-2-wide","title":"Fagor FBB-95S-N Stainless Back Bar Refrigerator, Three Solid Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95S-N is the flagship of the line in stainless: 95-1\/2\" wide, three solid stainless doors, 1,302 twelve-ounce cans, 864 bottles or five kegs. Stainless front and sides over the same 18-gauge stainless top and stainless interior means the entire visible cabinet is one material — a finish that holds up in a stadium, an arena club or any bar where the equipment never gets to hide.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,302 twelve-ounce cans, 864 twelve-ounce bottles, or 5 kegs. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, stainless steel exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257152090270,"sku":"GBS-FBB-95S-N","price":7128.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-95gs-n-stainless-back-bar-refrigerator-three-glass-doors-95-1-2-wide","title":"Fagor FBB-95GS-N Stainless Back Bar Refrigerator, Three Glass Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95GS-N is the top of the Next Generation back bar line: 95-1\/2\" wide, stainless front and sides, three dual pane glass doors in aluminum frames, 1,302 twelve-ounce cans or 864 bottles or five kegs behind them. Nearly eight feet of lit, locked, temperature-held display running off a single 1\/3 HP front-breathing system and one 115V outlet.\u003c\/p\u003e\u003cp\u003eCount it in kegs and five fit; count it in bottles and it is 864; count it in twelve-ounce cans and it is 1,302. Fagor publishes all three because no two bars count stock the same way. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are dual pane glass in aluminum frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 dual pane glass doors, stainless steel exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257152876702,"sku":"GBS-FBB-95GS-N","price":7938.75,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-24-48-slim-line-back-bar-refrigerator-two-solid-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48 Slim Line Back Bar Refrigerator, Two Solid Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48 exists for one reason: at 24-5\/8\" deep it fits behind a bar where a standard 29\" back bar cabinet will not. Four and a bit inches sounds like nothing until the bartender has to walk the aisle between the cabinet and the rail all night. Inside that slim footprint are two solid doors, 300 twelve-ounce cans, 180 bottles or two kegs across a 49-5\/8\" cabinet standing 35-1\/2\" tall.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 300 twelve-ounce cans, or 180 bottles, or 2 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/4 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 235 lb. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 49-5\/8\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257153269918,"sku":"GBS-FBB-24-48","price":3949.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1f2f8dd0-b007-2b7c-80c4-bbcb03cd7b96.jpg?v=1789748558"},{"product_id":"fagor-fbb-24-48g-slim-line-back-bar-refrigerator-two-glass-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48G Slim Line Back Bar Refrigerator, Two Glass Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48G puts dual pane glass in both doors of the shallowest cabinet Fagor builds for a back bar. It is 49-5\/8\" wide and 24-5\/8\" deep — more than four inches shallower than a standard back bar unit — and it displays 300 twelve-ounce cans or 180 bottles behind lit, locked glass in a space that would otherwise have held nothing at all.\u003c\/p\u003e\u003cp\u003eCount it in kegs and two fit; count it in bottles and it is 180; count it in twelve-ounce cans and it is 300. Fagor publishes all three because no two bars count stock the same way. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/4 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 250 lb. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, black vinyl exterior, 49-5\/8\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257153958046,"sku":"GBS-FBB-24-48G","price":4345.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/5ed881d9-5f75-ac0b-5e06-1f32cc4189ef.jpg?v=1789748559"},{"product_id":"fagor-fbb-24-60-slim-line-back-bar-refrigerator-two-solid-doors-62-1-4-wide-x-24-5-8-deep","title":"Fagor FBB-24-60 Slim Line Back Bar Refrigerator, Two Solid Doors — 62-1\/4\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-60 is the middle build of Fagor's slim line: 62-1\/4\" wide, still only 24-5\/8\" deep, and rated for 390 twelve-ounce cans, 234 bottles or three kegs behind two solid doors. It is the cabinet for a bar that needs three kegs' worth of storage and cannot give up the aisle depth a 29\" cabinet demands — the extra keg over the FBB-24-48 costs 12-5\/8\" of width and no depth at all.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 390 twelve-ounce cans across 2 doors is roughly 195 cans a section, alongside a published 234 bottles or 3 kegs for the whole cabinet. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with natural R-290 refrigerant and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/4 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 62-1\/4\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 290 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 62-1\/4\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257156939934,"sku":"GBS-FBB-24-60","price":4404.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/aad0b1a7-821b-eb3b-6f7f-46626dcb3ba5.jpg?v=1789748559"},{"product_id":"fagor-fbb-24-60g-slim-line-back-bar-refrigerator-two-glass-doors-62-1-4-wide-x-24-5-8-deep","title":"Fagor FBB-24-60G Slim Line Back Bar Refrigerator, Two Glass Doors — 62-1\/4\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eTwo dual pane glass doors across 62-1\/4\", and still just 24-5\/8\" front to back: the FBB-24-60G is the slim line's merchandising build. 390 twelve-ounce cans, 234 bottles or three kegs sit behind glass lit from an LED under the mullion, with bottle rails on one door angling the labels toward the guest and flat shelves on the other for bulk.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 390 twelve-ounce cans, 234 twelve-ounce bottles, or 3 kegs. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/4 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 62-1\/4\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 310 lb. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 dual pane glass doors, black vinyl exterior, 62-1\/4\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257158185118,"sku":"GBS-FBB-24-60G","price":4873.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/20d19c7d-a03e-de8e-657f-ee93787ff1cc.jpg?v=1789748561"},{"product_id":"fagor-fbb-24-72-slim-line-back-bar-refrigerator-three-solid-doors-72-wide-x-24-5-8-deep","title":"Fagor FBB-24-72 Slim Line Back Bar Refrigerator, Three Solid Doors — 72\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eSix feet of slim line: the FBB-24-72 runs a full 72\" wide and three solid doors while holding the line at 24-5\/8\" deep. It takes 540 twelve-ounce cans, 324 bottles or three kegs on six adjustable shelves, which makes it the largest cabinet available to a bar whose back wall simply cannot accept a 29\"-deep box.\u003c\/p\u003e\u003cp\u003eSix adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 540 twelve-ounce cans, or 324 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/4 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 72\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 340 lb. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 72\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257159266462,"sku":"GBS-FBB-24-72","price":4966.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/75e5072f-a3ee-a394-3957-6a7b5e701b43.jpg?v=1789748561"},{"product_id":"fagor-fbb-24-72g-slim-line-back-bar-refrigerator-three-glass-doors-72-wide-x-24-5-8-deep","title":"Fagor FBB-24-72G Slim Line Back Bar Refrigerator, Three Glass Doors — 72\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-72G is the largest glass-door cabinet in the slim line: 72\" wide, three dual pane glass doors, 540 twelve-ounce cans or 324 bottles on display, and a cabinet depth of 24-5\/8\". It gives a narrow bar six feet of lit merchandising without pushing the working aisle in by the four-plus inches a conventional 29\"-deep back bar would cost.\u003c\/p\u003e\u003cp\u003eCount it in kegs and three fit; count it in bottles and it is 324; count it in twelve-ounce cans and it is 540. Fagor publishes all three because no two bars count stock the same way. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are dual pane glass in black frames; dual pane glazing is what keeps the outer face clear instead of fogged in a warm room, and every door locks. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with natural R-290 refrigerant and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/4 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 72\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 365 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 dual pane glass doors, black vinyl exterior, 72\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257159823518,"sku":"GBS-FBB-24-72G","price":5334.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-72-Black-Vinyl-Finish-Three-Glass-Door-Back-Bar-Refrigerator-FBB-24-72G.jpg?v=1791295859"},{"product_id":"arctic-air-abb48-back-bar-refrigerator-2-solid-doors-49-12-5-cu-ft","title":"Arctic Air ABB48 Back Bar Refrigerator — 2 Solid Doors, 49\", 12.5 Cu Ft","description":"\u003cp\u003e12.5 cubic feet of cold storage behind 2 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB48 is a 49-inch back bar refrigerator for the working side of the bar — room for 48 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 49-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 49.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 280 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271539863710,"sku":"WR-ABB48","price":2199.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb48-big.jpg?v=1789748962"},{"product_id":"arctic-air-abb60-back-bar-refrigerator-2-solid-doors-61-16-7-cu-ft","title":"Arctic Air ABB60 Back Bar Refrigerator — 2 Solid Doors, 61\", 16.7 Cu Ft","description":"\u003cp\u003e16.7 cubic feet of cold storage behind 2 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB60 is a 61-inch back bar refrigerator for the working side of the bar — room for 72 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 61-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 61.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 320 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271574728862,"sku":"WR-ABB60","price":2552.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb60-big.jpg?v=1789749084"},{"product_id":"arctic-air-abb72-back-bar-refrigerator-3-solid-doors-73-20-7-cu-ft","title":"Arctic Air ABB72 Back Bar Refrigerator — 3 Solid Doors, 73\", 20.7 Cu Ft","description":"\u003cp\u003e20.7 cubic feet of cold storage behind 3 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB72 is a 73-inch back bar refrigerator for the working side of the bar — room for 84 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 73-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 6 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 3\/7 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 73.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 360 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271575122078,"sku":"WR-ABB72","price":3044.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb72-big.jpg?v=1789749099"},{"product_id":"arctic-air-abb48g-glass-door-back-bar-refrigerator-2-glass-doors-49-12-5-cu-ft","title":"Arctic Air ABB48G Glass Door Back Bar Refrigerator — 2 Glass Doors, 49\", 12.5 Cu Ft","description":"\u003cp\u003e12.5 cubic feet of cold storage behind 2 locking glass doors, in a cabinet 24 inches deep. The Arctic Air ABB48G is a 49-inch back bar refrigerator for the working side of the bar — room for 48 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night. The glass fronts turn that storage into a display: a guest reads the label from a bar stool and orders by sight instead of asking what you have.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 49-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 8-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 49.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 320 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271575679134,"sku":"WR-ABB48G","price":2332.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/model-abb48g.jpg?v=1789749137"},{"product_id":"arctic-air-abb60g-glass-door-back-bar-refrigerator-2-glass-doors-61-16-7-cu-ft","title":"Arctic Air ABB60G Glass Door Back Bar Refrigerator — 2 Glass Doors, 61\", 16.7 Cu Ft","description":"\u003cp\u003e16.7 cubic feet of cold storage behind 2 locking glass doors, in a cabinet 24 inches deep. The Arctic Air ABB60G is a 61-inch back bar refrigerator for the working side of the bar — room for 72 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night. The glass fronts turn that storage into a display: a guest reads the label from a bar stool and orders by sight instead of asking what you have.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 61-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 8-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 61.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 365 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271576400030,"sku":"WR-ABB60G","price":2703.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/model-abb60g.jpg?v=1789749158"},{"product_id":"arctic-air-abb72g-glass-door-back-bar-refrigerator-3-glass-doors-73-20-7-cu-ft","title":"Arctic Air ABB72G Glass Door Back Bar Refrigerator — 3 Glass Doors, 73\", 20.7 Cu Ft","description":"\u003cp\u003e20.7 cubic feet of cold storage behind 3 locking glass doors, in a cabinet 24 inches deep. The Arctic Air ABB72G is a 73-inch back bar refrigerator for the working side of the bar — room for 84 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night. The glass fronts turn that storage into a display: a guest reads the label from a bar stool and orders by sight instead of asking what you have.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 73-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 6 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 8-foot cord — on a self-contained 3\/7 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 73.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 410 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271578202270,"sku":"WR-ABB72G","price":3217.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/model-abb72g.jpg?v=1789749204"},{"product_id":"new-air-nbb-23-sb-23-inch-solid-door-back-bar-cooler-7-8-cu-ft-115v","title":"New Air NBB-23-SB 23-Inch Solid Door Back Bar Cooler — 7.8 cu. ft., 115V","description":"\u003cp\u003e7.8 cubic feet of cold storage in a cabinet 23 1\/2 inches wide. The New Air NBB-23-SB fills the slot at the end of a bar run or beside the ice well and holds cases of bottles and cans at 32°F to 41°F right where your bartenders reach, so nobody leaves the rail to restock from the walk-in mid-shift.\u003c\/p\u003e\u003cp\u003eA Carel digital controller sets and holds temperature from the front of the cabinet: you read a number instead of guessing. Two shelves split the 19 1\/2 x 26 x 29-inch interior into stacked rows of product, LED lighting shows every label when the door opens, and the solid black door keeps back stock out of the guest's view. The door closes itself and locks, so cold air stays in through service and inventory stays put after close.\u003c\/p\u003e\u003cp\u003eIt runs on 115V at 1.9 amps through a NEMA 5-15P cord, which means it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. Casters ship with it, so you can roll it out to clean behind it, and the stainless steel top gives you a landing spot for glassware at the bar. At 132 pounds with CFC-free R-290 refrigerant, it is ETL listed and ready to load the day it arrives.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521747521694,"sku":"DTX-NBB-23-SB","price":1869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-23-sb-1.png?v=1790231149"},{"product_id":"new-air-nbb-23-sg-23-inch-glass-door-back-bar-cooler-7-8-cu-ft-115v","title":"New Air NBB-23-SG 23-Inch Glass Door Back Bar Cooler — 7.8 cu. ft., 115V","description":"\u003cp\u003ePut your best-selling bottles on display in 23 1\/2 inches of bar space. The New Air NBB-23-SG is a glass door back bar cooler that shows guests exactly what is cold and ready, turning the product itself into the menu while holding it at 32°F to 41°F.\u003c\/p\u003e\u003cp\u003eLED interior lighting puts the labels on stage behind the glass, and two shelves stack the 19 1\/2 x 26 x 29-inch interior into clean rows your staff can face in seconds. The Carel digital controller sits on the front of the cabinet, so whoever is closing can check temperature at a glance. The door swings shut on its own and locks, which keeps cold air in through a busy service and keeps bottles secure once the lights go down.\u003c\/p\u003e\u003cp\u003ePower is 115V at 1.9 amps on a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e with no new circuit. It rolls on included casters, carries a stainless steel top for glassware, and runs on CFC-free R-290 refrigerant. At 23 1\/2 x 30 3\/4 x 38 3\/4 inches and 132 pounds, it is ETL listed and ready for the floor.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521846513822,"sku":"DTX-NBB-23-SG","price":1869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-23-sg-1.png?v=1790231184"},{"product_id":"new-air-nbb-48-sb-n-48-inch-narrow-solid-door-back-bar-cooler-12-cu-ft-115v","title":"New Air NBB-48-SB-N 48-Inch Narrow Solid Door Back Bar Cooler — 12 cu. ft., 115V","description":"\u003cp\u003eTwenty-four and a half inches deep. That is the number that gets the New Air NBB-48-SB-N into a back bar corridor where a standard-depth cooler would pinch the walkway, and it still carries 12 cubic feet of cold storage across a 48 3\/4-inch run.\u003c\/p\u003e\u003cp\u003eFour shelves at 17 1\/2 x 18 1\/4 inches organize the 36 1\/2 x 18 1\/2 x 30 1\/2-inch interior into rows sized for cases of bottles and cans, and LED lighting shows every one of them. A Carel digital controller holds 32°F to 41°F and reads out on the front, so temperature checks take a glance. The solid black doors close themselves and lock, keeping cold air in during service and inventory secure after close.\u003c\/p\u003e\u003cp\u003eIt draws 2.9 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. The stainless steel top stands 35 5\/8 inches high as a working ledge for garnish trays and glassware, adjustable legs level it on an uneven floor, and casters are available as an option. It weighs 231 pounds, runs on CFC-free R-290 refrigerant, and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521848021150,"sku":"DTX-NBB-48-SB-N","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-48-sb-n-1.png?v=1790231186"},{"product_id":"new-air-nbb-60-sb-60-inch-solid-door-back-bar-cooler-19-cu-ft-115v","title":"New Air NBB-60-SB 60-Inch Solid Door Back Bar Cooler — 19 cu. ft., 115V","description":"\u003cp\u003eNineteen cubic feet under a 58 3\/4-inch stainless top. The New Air NBB-60-SB carries a full night of bottled beer, wine and mixers behind locking solid doors, giving a mid-size bar enough cold storage to get through Friday without a restock run.\u003c\/p\u003e\u003cp\u003eInside, four 22 1\/2 x 21 1\/2-inch shelves span a 46 1\/4 x 22 1\/2 x 30 1\/2-inch interior, deep enough to stack product several rows back. The Carel digital controller holds 32°F to 41°F from the front panel, and LED lighting lets a bartender find the right bottle without digging. The solid black doors swing shut on their own and lock, so cold air stays in during service and inventory stays secure after close.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 58 3\/4 x 27 3\/4 x 36 1\/4 inches, and adjustable legs level it against the back bar, with casters available as an option. It draws 2.9 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. It weighs 254 pounds, runs on CFC-free R-290 refrigerant and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521851592862,"sku":"DTX-NBB-60-SB","price":2869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-60-sb-1.png?v=1790231187"},{"product_id":"new-air-nbb-48-sg-n-48-inch-narrow-glass-door-back-bar-cooler-12-cu-ft-115v","title":"New Air NBB-48-SG-N 48-Inch Narrow Glass Door Back Bar Cooler — 12 cu. ft., 115V","description":"\u003cp\u003eA lit glass display for bottles and cans that sticks out just 24 1\/2 inches from the wall. The New Air NBB-48-SG-N gives a shallow back bar 12 cubic feet of cold, visible product, putting your lineup in front of every guest at the rail without crowding the space your bartenders work in.\u003c\/p\u003e\u003cp\u003eLED lighting runs behind the glass doors so labels read from across the room, and four 17 1\/2 x 18 1\/4-inch shelves turn the 36 1\/2 x 18 1\/2 x 30 1\/2-inch interior into neat, faceable rows. The Carel digital controller holds 32°F to 41°F and shows the reading on the front. The doors close on their own and lock, which keeps cold air in when the bar is slammed and keeps bottles secure after last call.\u003c\/p\u003e\u003cp\u003eAt 48 3\/4 inches wide and 35 5\/8 inches high, it lines up with the back bar, and the stainless steel top serves as a working ledge. It draws 2.9 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. Adjustable legs, optional casters, CFC-free R-290 refrigerant and ETL listing round it out at 231 pounds.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521851625630,"sku":"DTX-NBB-48-SG-N","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-48-sg-n-1.png?v=1790231190"},{"product_id":"new-air-nbb-60-sg-60-inch-glass-door-back-bar-cooler-19-cu-ft-115v","title":"New Air NBB-60-SG 60-Inch Glass Door Back Bar Cooler — 19 cu. ft., 115V","description":"\u003cp\u003eNineteen cubic feet of cold, lit product on full view behind the bar. The New Air NBB-60-SG puts your bottled beer, cider and wine where guests can read every label, and it holds all of it at 32°F to 41°F on a Carel digital controller.\u003c\/p\u003e\u003cp\u003eFour shelves at 22 1\/2 x 21 1\/2 inches give you room to face a wide lineup, and LED lighting makes the glass doors a backlit display after dark. The controller reads out on the front, so an opening manager can confirm temperature before the first pour. The doors are self-closing and lock, which protects both the cold air during a rush and the inventory after close.\u003c\/p\u003e\u003cp\u003eIt runs 58 7\/8 inches wide and 36 1\/4 inches high under a stainless steel top, levels on adjustable legs, and takes optional casters. Power is 115V at 2.9 amps on a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. At 254 pounds with CFC-free R-290 refrigerant, it is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521852969118,"sku":"DTX-NBB-60-SG","price":2869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-60-sg-1.png?v=1790231191"},{"product_id":"new-air-nbb-69-sb-69-inch-solid-door-back-bar-cooler-23-5-cu-ft-115v","title":"New Air NBB-69-SB 69-Inch Solid Door Back Bar Cooler — 23.5 cu. ft., 115V","description":"\u003cp\u003e23.5 cubic feet across a 69 1\/4-inch run. The New Air NBB-69-SB is a solid door back bar cooler for bars that go through cases, not six-packs, holding bottled beer, wine and mixers at 32°F to 41°F under a stainless top your bartenders can work on.\u003c\/p\u003e\u003cp\u003eThe 56 1\/2 x 22 1\/2 x 30 1\/2-inch interior takes four 27 3\/4 x 21 1\/4-inch shelves, wide enough to line up full cases side by side. A Carel digital controller on the front holds your set point and shows it at a glance, and LED lighting means nobody hunts for a bottle in the dark. The solid black doors close themselves and lock, keeping cold air in during a rush and inventory secure overnight.\u003c\/p\u003e\u003cp\u003eOverall it measures 69 1\/4 x 27 3\/4 x 36 1\/4 inches and weighs 298 pounds, with adjustable legs and optional casters. It draws 4.0 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. CFC-free R-290 refrigerant, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521855426718,"sku":"DTX-NBB-69-SB","price":3189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-69-sb-1.png?v=1790231193"},{"product_id":"new-air-nbb-72-sb-n-72-inch-narrow-solid-door-back-bar-cooler-19-6-cu-ft-115v","title":"New Air NBB-72-SB-N 72-Inch Narrow Solid Door Back Bar Cooler — 19.6 cu. ft., 115V","description":"\u003cp\u003eSix feet of back bar cold storage that sits just 24 1\/2 inches deep. The New Air NBB-72-SB-N stretches 72 3\/4 inches along the wall and packs 19.6 cubic feet behind locking solid doors, built for long, shallow bars where a standard-depth cooler would eat the walkway.\u003c\/p\u003e\u003cp\u003eSix shelves, at 19 3\/4 x 18 inches and 19 1\/2 x 18 inches, divide the 60 x 18 3\/4 x 30-inch interior so beer, wine and mixers each get their own place. The Carel digital controller holds 32°F to 41°F and reads out on the front, and LED lighting puts every label in view when a door opens. The solid black doors are self-closing and lock, keeping cold air in and stock secure.\u003c\/p\u003e\u003cp\u003eAt 36 1\/4 inches high, the stainless steel top lines up as a working ledge along the full run. It draws 4.0 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. Adjustable legs and optional casters, CFC-free R-290 refrigerant, 310 pounds, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521857491102,"sku":"DTX-NBB-72-SB-N","price":3439.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-72-sb-n-1.png?v=1790231194"},{"product_id":"new-air-nbb-69-sg-69-inch-glass-door-back-bar-cooler-23-5-cu-ft-115v","title":"New Air NBB-69-SG 69-Inch Glass Door Back Bar Cooler — 23.5 cu. ft., 115V","description":"\u003cp\u003eA 69 1\/4-inch wall of lit, cold product. The New Air NBB-69-SG gives you 23.5 cubic feet of glass door display behind the bar, so every guest at the rail sees the full bottle and can list at 32°F to 41°F, ready to pour.\u003c\/p\u003e\u003cp\u003eFour shelves at 27 3\/4 x 21 1\/4 inches hold long, faced rows of product, and LED lighting behind the glass keeps the display bright through a dim dining room. The Carel digital controller reads on the front, so temperature checks do not mean opening a door. The doors are self-closing and lockable, holding cold air through a packed night and keeping bottles secure after close.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 69 1\/4 x 27 3\/4 x 36 1\/4 inches under a stainless steel top, sits on adjustable legs and takes optional casters. It draws 4.0 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. At 298 pounds with CFC-free R-290 refrigerant, it is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521858179230,"sku":"DTX-NBB-69-SG","price":3189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-69-sg-1.png?v=1790231195"},{"product_id":"new-air-nbb-72-sg-n-72-inch-narrow-glass-door-back-bar-cooler-19-6-cu-ft-115v","title":"New Air NBB-72-SG-N 72-Inch Narrow Glass Door Back Bar Cooler — 19.6 cu. ft., 115V","description":"\u003cp\u003eA six-foot lit display that projects just 24 1\/2 inches from the wall. The New Air NBB-72-SG-N lines a shallow back bar with 19.6 cubic feet of cold product behind glass doors, putting your whole bottle and can lineup in view without narrowing the lane behind the rail.\u003c\/p\u003e\u003cp\u003eSix shelves, each 18 inches deep, organize the 60 x 18 3\/4 x 30-inch interior into rows you can face by style, brewery or price. LED lighting keeps the display bright, and the Carel digital controller holds 32°F to 41°F with a readout on the front. The doors close on their own and lock, so the cabinet holds temperature through a rush and the display stays secure after close.\u003c\/p\u003e\u003cp\u003eThe 72 3\/4 x 24 1\/2 x 36 1\/4-inch cabinet carries a stainless steel top along its full length, levels on adjustable legs and takes optional casters. Power is 115V at 4.0 amps on a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. It weighs 310 pounds, runs on CFC-free R-290 refrigerant, and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521859719326,"sku":"DTX-NBB-72-SG-N","price":3439.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-72-sg-n-1.png?v=1790231197"},{"product_id":"new-air-nbb-90-sg-90-inch-glass-door-back-bar-cooler-32-cu-ft-115v","title":"New Air NBB-90-SG 90-Inch Glass Door Back Bar Cooler — 32 cu. ft., 115V","description":"\u003cp\u003eSeven and a half feet of glass, lit and cold. The New Air NBB-90-SG turns the back bar into a 32-cubic-foot display across a 90 1\/2-inch cabinet, holding your entire bottle and can program at 32°F to 41°F in full view of every seat at the bar.\u003c\/p\u003e\u003cp\u003eSix shelves at 25 x 21 1\/2 inches fill the 77 3\/4 x 22 x 30 1\/2-inch interior with room for long, faced rows, and LED lighting makes the glass read as a backlit wall after dark. The Carel digital controller sits on the front, so temperature is one glance away. The doors are self-closing and lock, keeping cold air in during a packed service and the whole display secure after close.\u003c\/p\u003e\u003cp\u003eOverall it measures 90 1\/2 x 27 3\/4 x 36 1\/4 inches under a stainless steel top, weighs 364 pounds, and sits on adjustable legs with optional casters. It draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. CFC-free R-290 refrigerant, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521862504606,"sku":"DTX-NBB-90-SG","price":3919.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-90-sg-1.png?v=1790231198"},{"product_id":"new-air-nbb-90-sb-90-inch-solid-door-back-bar-cooler-32-cu-ft-115v","title":"New Air NBB-90-SB 90-Inch Solid Door Back Bar Cooler — 32 cu. ft., 115V","description":"\u003cp\u003eThirty-two cubic feet of cold storage, the largest in this back bar line, across a 90 1\/2-inch cabinet. The New Air NBB-90-SB is built for high-volume bars: it holds a full night's beer, wine and mixers at 32°F to 41°F behind locking solid doors and puts a long stainless work surface on top.\u003c\/p\u003e\u003cp\u003eThe 77 3\/4 x 22 x 30 1\/2-inch interior carries six shelves at 25 x 21 1\/2 inches, so beer, wine and mixers can each get whole shelves of their own. A Carel digital controller holds temperature from the front, and LED lighting shows every row. Self-closing, locking doors hold cold air in when the bar is three deep and keep stock secure after close.\u003c\/p\u003e\u003cp\u003eIt measures 90 1\/2 x 27 3\/4 x 36 1\/4 inches and weighs 364 pounds, with adjustable legs and optional casters. Even at this size it draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. CFC-free R-290 refrigerant, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521863192734,"sku":"DTX-NBB-90-SB","price":3919.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-90-sb-1.png?v=1790231199"},{"product_id":"new-air-nbd-23-sb-23-inch-single-keg-beer-dispenser-1-2-barrel-115v","title":"New Air NBD-23-SB 23-Inch Single-Keg Beer Dispenser — 1\/2 Barrel, 115V","description":"\u003cp\u003eDraft beer from a cabinet 23 1\/2 inches wide. The New Air NBD-23-SB holds one full 1\/2 barrel keg at 32°F to 41°F and pours it through a Talos beer tower kit with faucets, so a small bar, restaurant or taproom can put a house draft on without building a walk-in draft system.\u003c\/p\u003e\u003cp\u003eA Carel digital controller keeps the keg at your set temperature, and that consistency is what gets clean, properly carbonated pours instead of foam. Keg couplers come with it. The stainless steel top carries a safety bar and a removable drip tray that pulls out for cleaning at close, and LED interior lighting lets you check the keg at a glance. Self-closing doors lock, so the keg is secure overnight.\u003c\/p\u003e\u003cp\u003eThe unit measures 23 1\/2 x 30 3\/4 x 39 3\/4 inches with a 19 1\/2 x 26 x 29-inch interior, and it rolls on wheels, so you can move it for an event or to clean underneath. It draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. At 154 pounds with CFC-free R-290 refrigerant, it is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521864700062,"sku":"DTX-NBD-23-SB","price":1989.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbd-23-sb-1.png?v=1790231200"},{"product_id":"new-air-nbd-69-sb-69-inch-three-keg-beer-dispenser-3-x-1-2-barrel-115v","title":"New Air NBD-69-SB 69-Inch Three-Keg Beer Dispenser — 3 x 1\/2 Barrel, 115V","description":"\u003cp\u003eThree full 1\/2 barrel kegs under one 69-inch stainless top. The New Air NBD-69-SB gives a bar a real draft program, with a house lager, an IPA and a seasonal on tap at once, poured through a Talos beer tower kit with faucets right at the back bar.\u003c\/p\u003e\u003cp\u003eThe Carel digital controller holds your kegs at a steady set point, which is what keeps pours clean from the first glass of the night to the last. Keg couplers come with the unit, and the removable drip tray lifts out for cleaning at close. The 56 1\/2 x 22 x 30 1\/2-inch interior adds two 27 3\/4 x 21 1\/2-inch shelves for bottled backup, and LED lighting shows everything inside. Self-closing, locking doors keep the cold in and the kegs secure.\u003c\/p\u003e\u003cp\u003eWith 23.3 cubic feet in a 69 x 27 3\/4 x 36 1\/4-inch cabinet, it rolls on wheels and has a safety bar across the stainless top. It draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e, with no remote draft system or glycol lines to install. It weighs 326 pounds, runs on CFC-free R-290 refrigerant, and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521866961054,"sku":"DTX-NBD-69-SB","price":3659.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbd-69-sb-1.png?v=1790231201"},{"product_id":"new-air-nbd-90-sb-90-inch-five-keg-beer-dispenser-5-x-1-2-barrel-115v","title":"New Air NBD-90-SB 90-Inch Five-Keg Beer Dispenser — 5 x 1\/2 Barrel, 115V","description":"\u003cp\u003eFive 1\/2 barrel kegs, one cabinet, one standard plug. The New Air NBD-90-SB is the largest dispenser in this line: 32 cubic feet across a 90 1\/3-inch cabinet, holding a full five-beer draft program at 32°F to 41°F and pouring it through a Talos beer tower kit with faucets.\u003c\/p\u003e\u003cp\u003eA Carel digital controller keeps every keg at the same set point, so the fifth tap pours as clean as the first. Keg couplers ship with it, and the removable drip tray comes out for rinsing at close. Two 25 x 21 1\/2-inch shelves hold bottled backup alongside the kegs, and LED interior lighting shows what is left at a glance. Self-closing doors lock, keeping the cold in during a rush and the kegs secure overnight.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 90 1\/3 x 27 3\/4 x 36 1\/4 inches, rolls on wheels, and carries a safety bar across its stainless steel top. It draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e, with no remote draft system or glycol lines to install. It weighs 364 pounds, runs on CFC-free R-290 refrigerant, and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521869156510,"sku":"DTX-NBD-90-SB","price":4419.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbd-90-sb-1.png?v=1790231207"},{"product_id":"fagor-fbb-24-48gs-stainless-slim-line-back-bar-refrigerator-two-glass-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48GS Stainless Slim Line Back Bar Refrigerator, Two Glass Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48GS is the stainless steel version of Fagor's shallow back bar: two dual pane glass doors in aluminum frames across a cabinet 49-5\/8\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 300 twelve-ounce cans, 360 twelve-ounce bottles or 2 kegs, so you can size it against however your distributor delivers. 4 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. Behind dual pane glass and an LED strip under the mullion, that stock becomes the display.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 250 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600740188318,"sku":"GBS-FBB-24-48GS","price":5085.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-49_62-Stainless-Steel-Finish-Double-Glass-Door-Back-Bar-Refrigerator-FBB-24-48GS.jpg?v=1792178081"},{"product_id":"fagor-fbb-24-48s-stainless-slim-line-back-bar-refrigerator-two-solid-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48S Stainless Slim Line Back Bar Refrigerator, Two Solid Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48S is the stainless steel version of Fagor's shallow back bar: two stainless steel doors across a cabinet 49-5\/8\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 300 twelve-ounce cans, 360 twelve-ounce bottles or 2 kegs, so you can size it against however your distributor delivers. 4 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. An LED strip under the mullion lights the shelves for loading and picking.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 235 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600744677534,"sku":"GBS-FBB-24-48S","price":4618.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-49_62-Stainless-Steel-Finish-Double-Solid-Door-Back-Bar-Refrigerator-FBB-24-48S.jpg?v=1792178113"},{"product_id":"fagor-fbb-24-60s-stainless-slim-line-back-bar-refrigerator-two-solid-doors-62-1-4-wide-x-24-5-8-deep","title":"Fagor FBB-24-60S Stainless Slim Line Back Bar Refrigerator, Two Solid Doors — 62-1\/4\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-60S is the stainless steel version of Fagor's shallow back bar: two stainless steel doors across a cabinet 62-1\/4\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 390 twelve-ounce cans, 450 twelve-ounce bottles or 3 kegs, so you can size it against however your distributor delivers. 4 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. An LED strip under the mullion lights the shelves for loading and picking.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 62-1\/4\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 290 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600745988254,"sku":"GBS-FBB-24-60S","price":5153.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-62_25-Stainless-Steel-Finish-Double-Solid-Door-Back-Bar-Refrigerator-FBB-24-60S.jpg?v=1792178131"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/collections\/collection-bar-refrigeration.png?v=1788548499","url":"https:\/\/directfoodequipment.com\/collections\/bar-refrigeration.oembed?page=5","provider":"Direct Food Equipment","version":"1.0","type":"link"}