{"title":"Bag Sealer Accessories","description":"\u003cp\u003eBag sealer accessories keep impulse and vacuum equipment running instead of sitting idle waiting on a part. Element and pad service kits restore clean, consistent seals on portable and foot-operated impulse sealers in 8\", 12\", 16\", and 20\" bar lengths, and poly bag sealing tape in four colors lets a kitchen color-code product by day or station. Gas conversion sets adapt specific chamber machines for modified atmosphere work. Bakeries, butcher shops, and commissaries that bag all day should keep spares on the shelf. Shop the matching \u003ca href=\"\/collections\/impulse-sealers\"\u003eimpulse sealers\u003c\/a\u003e and \u003ca href=\"\/collections\/vacuum-packaging-machines\"\u003echamber vacuum sealers\u003c\/a\u003e, plus \u003ca href=\"\/collections\/vacuum-packaging-bags\"\u003evacuum packaging bags\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"atmovac-ch16-gas-conversion-set-part-0903017-fits-chinook-16d-and-16d-vacuum-machines","title":"Atmovac CH16 Gas Conversion Set (Part 0903017) — Fits CHINOOK 16D and 16D+ Vacuum Machines","description":"\u003cp\u003eThe gas conversion set for the Atmovac CHINOOK 16D and 16D+ vacuum machines. Fitting it enables gas flush on the machine: the chamber is backfilled with an inert gas before sealing, which is how you hold color on red meat and keep delicate items from being crushed by full vacuum.\u003c\/p\u003e\u003cp\u003eSold as a conversion set for the 16D and 16D+ only. The manufacturer's part number is 0903017.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":48253704732830,"sku":"EUR-CH16","price":644.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/CH14_20-_20CH16_20-_20CY20.jpg?v=1789748381"},{"product_id":"atmovac-0930126-liquid-control-kit-for-cyclone-floor-vacuum-machines","title":"Atmovac 0930126 Liquid Control Kit — for CYCLONE Floor Vacuum Machines","description":"\u003cp\u003ePull too much vacuum on a bag of stock and it boils in the chamber, spraying product over the seal, into the chamber and into the pump oil. Liquid Control stops that from happening. This kit brings it to the Atmovac CYCLONE floor machines, the line that packs soups, sauces and marinades by the case. A highly sensitive sensor watches for the instant moisture in the product starts to evaporate, ends the vacuum stage right there and seals the bag, so the liquid stays in the pack, the yield stays on the scale and the pump never takes on water.\u003c\/p\u003e\u003cp\u003eOnce the kit is fitted, Liquid Control is switched on or off program by program, so your soup program uses it and your steak program does not. Liquid Control+ adds a set number of seconds of vacuum after the boiling point for product that can take a little more. Installation is done by a qualified technician.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821883457694,"sku":"EUR-0930126","price":1188.9,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-0940112-service-kit-for-arctic-11-chinook-14-and-chinook-14","title":"Atmovac 0940112 Service Kit — for ARCTIC 11, CHINOOK 14 and CHINOOK 14+","description":"\u003cp\u003eA chamber machine that seals weak and pulls slow is almost always a machine that is overdue for service. This is the Atmovac service kit for the ARCTIC 11, CHINOOK 14 and CHINOOK 14+: the maintenance components for that machine family, boxed together under one part number, so the scheduled service is a single order instead of a parts hunt. It covers the compact end of the line: the ARCTIC 11, the CHINOOK 14 and the CHINOOK 14+.\u003c\/p\u003e\u003cp\u003eAtmovac's maintenance schedule for these machines calls for replacing the sealing wires, the silicone rubber in the silicone holders and the lid gasket, and changing the pump oil, at set intervals. Those are the parts that decide whether a bag seals tight and whether the chamber reaches full vacuum, and they wear with every cycle. These machines run their pumps on Atmovac VS32 synthetic oil, sold separately as part 439510.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821903708318,"sku":"EUR-0940112","price":139.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/940112_20-_20940133.jpg?v=1793098677"},{"product_id":"atmovac-0940130-service-kit-for-cyclone-201d-and-cyclone-203d","title":"Atmovac 0940130 Service Kit — for CYCLONE 201D and CYCLONE 203D","description":"\u003cp\u003eA chamber machine that seals weak and pulls slow is almost always a machine that is overdue for service. This is the Atmovac service kit for the CYCLONE 201D and CYCLONE 203D: the maintenance components for that machine family, boxed together under one part number, so the scheduled service is a single order instead of a parts hunt. It is built for the CYCLONE 201D and CYCLONE 203D floor machines, which run long packing days and wear seal parts accordingly.\u003c\/p\u003e\u003cp\u003eAtmovac's maintenance schedule for these machines calls for replacing the sealing wires, the silicone rubber in the silicone holders and the lid gasket, and changing the pump oil, at set intervals. Those are the parts that decide whether a bag seals tight and whether the chamber reaches full vacuum, and they wear with every cycle. The CYCLONE manual also schedules replacement of the pump oil filter and oil exhaust filter, so keep those on the service plan as well.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821913276574,"sku":"EUR-0940130","price":171.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/940130_20-_20940140.jpg?v=1793098778"},{"product_id":"atmovac-0940133-service-kit-for-arctic-16d-chinook-16d-and-oroshi-16d","title":"Atmovac 0940133 Service Kit — for ARCTIC 16D, CHINOOK 16D and OROSHI 16D","description":"\u003cp\u003eA chamber machine that seals weak and pulls slow is almost always a machine that is overdue for service. This is the Atmovac service kit for the ARCTIC 16D, CHINOOK 16D and OROSHI 16D: the maintenance components for that machine family, boxed together under one part number, so the scheduled service is a single order instead of a parts hunt. It covers the twin-bar 16D machines: the ARCTIC 16D, the CHINOOK 16D and the OROSHI 16D.\u003c\/p\u003e\u003cp\u003eAtmovac's maintenance schedule for these machines calls for replacing the sealing wires, the silicone rubber in the silicone holders and the lid gasket, and changing the pump oil, at set intervals. Those are the parts that decide whether a bag seals tight and whether the chamber reaches full vacuum, and they wear with every cycle. These machines run their pumps on Atmovac VS32 synthetic oil, sold separately as part 439510.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821918683294,"sku":"EUR-0940133","price":172.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/940112_20-_20940133_1a197915-2ac5-4b94-a979-9de8479ad5f3.jpg?v=1793098856"},{"product_id":"atmovac-0940140-service-kit-for-pampero-30-20d3","title":"Atmovac 0940140 Service Kit — for PAMPERO 30\/20D3","description":"\u003cp\u003eA chamber machine that seals weak and pulls slow is almost always a machine that is overdue for service. This is the Atmovac service kit for the PAMPERO 30\/20D3: the maintenance components for that machine family, boxed together under one part number, so the scheduled service is a single order instead of a parts hunt. It is built for the PAMPERO 30\/20D3 industrial floor machine, where the long seal bars see heavy daily use.\u003c\/p\u003e\u003cp\u003eAtmovac's maintenance schedule for these machines calls for replacing the sealing wires, the silicone rubber in the silicone holders and the lid gasket, and changing the pump oil, at set intervals. Those are the parts that decide whether a bag seals tight and whether the chamber reaches full vacuum, and they wear with every cycle. The PAMPERO manual also schedules replacement of the pump oil filter and oil exhaust filter, so keep those on the service plan as well.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821923500190,"sku":"EUR-0940140","price":239.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/940130_20-_20940140_9f7f0079-ead8-43e7-8c15-9129e73ec197.jpg?v=1793098937"},{"product_id":"atmovac-30200160-big-padded-plate-19-3-4-x-13-inch-for-diablo-20d","title":"Atmovac 30200160 Big Padded Plate, 19-3\/4 x 13 Inch — for DIABLO 20D","description":"\u003cp\u003eWhere product sits in the chamber decides how the bag lies across the seal bar. This 19.75 x 13 inch padded plate is made for the Atmovac DIABLO 20D and gives product of various sizes a supported surface inside the chamber, so you position each bag consistently and the cycle runs the same from the first pack to the last.\u003c\/p\u003e\u003cp\u003eIt is a factory Atmovac part for the DIABLO 20D, sized to that chamber. A smaller 9.75 x 13 inch plate for the same machine is part 30200161.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821928710302,"sku":"EUR-30200160","price":69.69,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-30200161-small-padded-plate-9-3-4-x-13-inch-for-diablo-20d","title":"Atmovac 30200161 Small Padded Plate, 9-3\/4 x 13 Inch — for DIABLO 20D","description":"\u003cp\u003eWhere product sits in the chamber decides how the bag lies across the seal bar. This 9.75 x 13 inch padded plate is made for the Atmovac DIABLO 20D and gives smaller product a supported surface inside the chamber, so you position each bag consistently and the cycle runs the same from the first pack to the last.\u003c\/p\u003e\u003cp\u003eIt is a factory Atmovac part for the DIABLO 20D, sized to that chamber. A larger 19.75 x 13 inch plate for the same machine is part 30200160.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821937033374,"sku":"EUR-30200161","price":36.25,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-30201659-padded-plate-15-1-4-x-9-3-8-inch-for-diablo-17d","title":"Atmovac 30201659 Padded Plate, 15-1\/4 x 9-3\/8 Inch — for DIABLO 17D","description":"\u003cp\u003eWhere product sits in the chamber decides how the bag lies across the seal bar. This 15.25 x 9.375 inch padded plate is made for the Atmovac DIABLO 17D and gives product of various sizes a supported surface inside the chamber, so you position each bag consistently and the cycle runs the same from the first pack to the last.\u003c\/p\u003e\u003cp\u003eIt is a factory Atmovac part for the DIABLO 17D, sized to that chamber. A smaller 7.625 x 9.375 inch plate for the same machine is part 30201660.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821941751966,"sku":"EUR-30201659","price":30.13,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-30201660-small-padded-plate-7-5-8-x-9-3-8-inch-for-diablo-17d","title":"Atmovac 30201660 Small Padded Plate, 7-5\/8 x 9-3\/8 Inch — for DIABLO 17D","description":"\u003cp\u003eWhere product sits in the chamber decides how the bag lies across the seal bar. This 7.625 x 9.375 inch padded plate is made for the Atmovac DIABLO 17D and gives smaller product a supported surface inside the chamber, so you position each bag consistently and the cycle runs the same from the first pack to the last.\u003c\/p\u003e\u003cp\u003eIt is a factory Atmovac part for the DIABLO 17D, sized to that chamber. A larger 15.25 x 9.375 inch plate for the same machine is part 30201659.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821946798238,"sku":"EUR-30201660","price":19.37,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-30201664-external-exhaust-hose-with-connectors-for-santa-ana","title":"Atmovac 30201664 External Exhaust Hose with Connectors — for SANTA ANA","description":"\u003cp\u003eThis is the external exhaust hose Atmovac makes for the SANTA ANA external vacuum sealer, supplied with the connectors needed to fit it. It carries the machine's exhaust air out to where you want it rather than leaving it at the bench.\u003c\/p\u003e\u003cp\u003eBecause it ships complete with its connectors, there is nothing else to source: fit the hose, route it where the air should go, and the SANTA ANA is back in service. It is a factory Atmovac part for that machine, under part number 30201664.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821953908894,"sku":"EUR-30201664","price":1.38,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-atv-dvck-vacuum-container-kit-3-containers-with-lids-for-santa-ana-and-casa-external-vacuum-sealers","title":"Atmovac ATV-DVCK Vacuum Container Kit, 3 Containers with Lids — for SANTA ANA and CASA External Vacuum Sealers","description":"\u003cp\u003eNot everything belongs in a bag. Berries, leafy greens, soft cheese and leftovers keep their shape in a rigid container, and these three vacuum down through the external vacuum tube on an Atmovac SANTA ANA or CASA sealer. The set nests an 800 ml, a 1.4 L and a 2 L container, all on the same 6.75 x 6.75 inch footprint, each with its own screw-cap lid and silicone seal.\u003c\/p\u003e\u003cp\u003eThey go from the counter to the fridge to the freezer, rated for storage from -4 to 158°F, then into the dishwasher, and they reheat in the microwave for up to five minutes at 158°F. Atmovac designs this kit for domestic use: the home kitchen, the owner's own pantry, the cook who already has a SANTA ANA on the counter.\u003c\/p\u003e\u003cp\u003eThe bodies are AS plastic with silicone seals and ABS screw caps, the kit carries a three-month warranty from Atmovac, and it is made in China.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821962002590,"sku":"EUR-ATVDVCK","price":61.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ATMOVAC_ATVDVCK_HiResPicture1.jpg?v=1793099379"},{"product_id":"atmovac-ch14-b35-gas-flush-kit-0903009-for-chinook-14-and-chinook-14","title":"Atmovac CH14 B35 Gas Flush Kit (0903009) — for CHINOOK 14 and CHINOOK 14+","description":"\u003cp\u003eFull vacuum crushes a croissant and turns fresh beef dark. Gas flush fixes both: after the chamber pulls vacuum, the machine injects protective gas into the bag, then seals it, so the pack holds its shape and the product keeps its color and appearance on the shelf. The B35 gas flush kit brings that capability to the CHINOOK 14 and CHINOOK 14+. Both the CHINOOK 14 and the CHINOOK 14+ are on our site, and Atmovac offers the kit fitted at purchase or as a retrofit.\u003c\/p\u003e\u003cp\u003eThe kit plugs into a regulated gas supply at a 0.24-inch connector and draws 60 to 100 liters per minute, at a maximum supply pressure of 14.5 psi. Once it is fitted, gas is set per program on the machine, alongside vacuum and seal time, so a red-meat program and a pastry program can each carry their own setting. Installation is done by a qualified technician, either when the machine is ordered or later on a machine already in service.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821969965214,"sku":"EUR-CH14","price":644.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/CH14_20-_20CH16_20-_20CY20_92d1b58a-5f83-481a-9a07-e2098a857dfe.jpg?v=1793099425"},{"product_id":"atmovac-cy20-complete-m52-ii-gas-flush-kit-0903036-for-cyclone-floor-vacuum-machines","title":"Atmovac CY20 Complete M52-II Gas Flush Kit (0903036) — for CYCLONE Floor Vacuum Machines","description":"\u003cp\u003eFull vacuum crushes a croissant and turns fresh beef dark. Gas flush fixes both: after the chamber pulls vacuum, the machine injects protective gas into the bag, then seals it, so the pack holds its shape and the product keeps its color and appearance on the shelf. The complete M52-II gas flush kit brings that capability to Atmovac CYCLONE floor machines. The CYCLONE line is where high-volume butcher and processing rooms pack, and gas flush is what lets those packs go to a retail case.\u003c\/p\u003e\u003cp\u003eThe kit plugs into a regulated gas supply at a 0.24-inch connector and draws 60 to 100 liters per minute, at a maximum supply pressure of 14.5 psi. Once it is fitted, gas is set per program on the machine, alongside vacuum and seal time, so a red-meat program and a pastry program can each carry their own setting. Installation is done by a qualified technician, either when the machine is ordered or later on a machine already in service.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67821977272478,"sku":"EUR-CY20","price":1322.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/CH14_20-_20CH16_20-_20CY20_bf91db9f-2e09-42b7-b169-67e7f67e0a94.jpg?v=1793099435"},{"product_id":"atmovac-439510-vs32-synthetic-vacuum-pump-oil-1-liter-for-arctic-chinook-and-oroshi-vacuum-machines","title":"Atmovac 439510 VS32 Synthetic Vacuum Pump Oil, 1 Liter — for ARCTIC, CHINOOK and OROSHI Vacuum Machines","description":"\u003cp\u003eThe vacuum pump is the part of a chamber machine that does the actual work, and it runs on oil. This is the oil Atmovac names for it: VS32 synthetic, in a one-liter bottle, for the pumps on the ARCTIC 11, ARCTIC 16 and ARCTIC 16D, the CHINOOK 14, CHINOOK 14+, CHINOOK 16+ and CHINOOK 16D, and the OROSHI 16 and 16D.\u003c\/p\u003e\u003cp\u003eA liter covers more than one oil change on every one of those machines. The ARCTIC 11 pump takes 0.25 liter, the ARCTIC 16, CHINOOK 14 and CHINOOK 14+ take 0.3 liter, and the 25 m³\/h pumps on the ARCTIC 16D, CHINOOK 16+, CHINOOK 16D and OROSHI models take 0.5 liter. Keep a bottle on the shelf and a low reading on the sight glass becomes a two-minute top-up instead of a stopped packing line, and the scheduled oil change happens on the day it is due rather than the day a bottle arrives.\u003c\/p\u003e\u003cp\u003eAtmovac rates VS32 for pump ambient temperatures from 14 to 104°F. The CYCLONE and PAMPERO floor machines run a different pump oil, so this bottle is for the countertop ARCTIC, CHINOOK and OROSHI lines.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822239842462,"sku":"EUR-439510","price":60.68,"currency_code":"CAD","in_stock":true}]},{"product_id":"atmovac-0300126-seal-and-cut-sealing-bar-for-chinook-14-and-chinook-14","title":"Atmovac 0300126 Seal-and-Cut Sealing Bar — for CHINOOK 14 and CHINOOK 14+","description":"\u003cp\u003eA seal that leaks is a bag of product you throw away. This is the Atmovac seal-and-cut sealing bar for the CHINOOK 14 and CHINOOK 14+: one sealing wire welds the bag shut while a cut-off wire beside it melts through the film above the seal, so the tail tears away clean and every pack leaves the chamber trimmed and ready to label. It fits both versions of the 14-inch Chinook, the CHINOOK 14 and the CHINOOK 14+.\u003c\/p\u003e\u003cp\u003eWhen the wire or its Teflon covering is burned or worn, the seal is where it shows first: wrinkled welds, soft spots and bags that lose vacuum in the walk-in. Fitting a fresh Atmovac bar puts the seal back to factory condition on the machine you already own. The bar lifts off its cylinders inside the chamber, and the sealing and cut-off wires ride under Teflon tape so the bag never sticks to the hot wire. On ACS-equipped machines like the CHINOOK 14+, the cut-off wire can be timed separately from the seal wire for heavier film.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822249083038,"sku":"EUR-0300126","price":333.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/300126_20-_20300215_20-_20300222_20-_20300325.jpg?v=1793100106"},{"product_id":"atmovac-0300215-seal-and-cut-sealing-bar-for-arctic-16-arctic-16d-and-chinook-16","title":"Atmovac 0300215 Seal-and-Cut Sealing Bar — for ARCTIC 16, ARCTIC 16D and CHINOOK 16+","description":"\u003cp\u003eA seal that leaks is a bag of product you throw away. This is the Atmovac seal-and-cut sealing bar for the ARCTIC 16, ARCTIC 16D and CHINOOK 16+: one sealing wire welds the bag shut while a cut-off wire beside it melts through the film above the seal, so the tail tears away clean and every pack leaves the chamber trimmed and ready to label. At 16.75 inches it spans the full seal position on the ARCTIC 16, the ARCTIC 16D and the CHINOOK 16+.\u003c\/p\u003e\u003cp\u003eWhen the wire or its Teflon covering is burned or worn, the seal is where it shows first: wrinkled welds, soft spots and bags that lose vacuum in the walk-in. Fitting a fresh Atmovac bar puts the seal back to factory condition on the machine you already own. The bar lifts off its cylinders inside the chamber, and the sealing and cut-off wires ride under Teflon tape so the bag never sticks to the hot wire. One bar covers three machines across the 16-inch ARCTIC and CHINOOK lines, so a mixed fleet stocks a single spare.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822256652446,"sku":"EUR-0300215","price":259.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/300126_20-_20300215_20-_20300222_20-_20300325_799e9304-255a-4500-812d-0d93d343df8c.jpg?v=1793100126"},{"product_id":"atmovac-0300222-seal-and-cut-sealing-bar-for-chinook-16d-and-chinook-16d","title":"Atmovac 0300222 Seal-and-Cut Sealing Bar — for CHINOOK 16D and CHINOOK 16D+","description":"\u003cp\u003eA seal that leaks is a bag of product you throw away. This is the Atmovac seal-and-cut sealing bar for the CHINOOK 16D and CHINOOK 16D+: one sealing wire welds the bag shut while a cut-off wire beside it melts through the film above the seal, so the tail tears away clean and every pack leaves the chamber trimmed and ready to label. It is built for the twin-bar layout of the CHINOOK 16D and CHINOOK 16D+.\u003c\/p\u003e\u003cp\u003eWhen the wire or its Teflon covering is burned or worn, the seal is where it shows first: wrinkled welds, soft spots and bags that lose vacuum in the walk-in. Fitting a fresh Atmovac bar puts the seal back to factory condition on the machine you already own. The bar lifts off its cylinders inside the chamber, and the sealing and cut-off wires ride under Teflon tape so the bag never sticks to the hot wire. Order one bar for each seal position you are replacing.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822263533726,"sku":"EUR-0300222","price":317.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/300126_20-_20300215_20-_20300222_20-_20300325_ff6e550a-defc-4070-8649-91a7fcf60cc3.jpg?v=1793100131"},{"product_id":"atmovac-0300325-seal-and-cut-sealing-bar-for-cyclone-201d-and-cyclone-203d","title":"Atmovac 0300325 Seal-and-Cut Sealing Bar — for CYCLONE 201D and CYCLONE 203D","description":"\u003cp\u003eA seal that leaks is a bag of product you throw away. This is the Atmovac seal-and-cut sealing bar for the CYCLONE 201D and CYCLONE 203D: one sealing wire welds the bag shut while a cut-off wire beside it melts through the film above the seal, so the tail tears away clean and every pack leaves the chamber trimmed and ready to label. It is the bar for the CYCLONE 201D and CYCLONE 203D floor machines, where cut-off is one of the seal options Atmovac builds in.\u003c\/p\u003e\u003cp\u003eWhen the wire or its Teflon covering is burned or worn, the seal is where it shows first: wrinkled welds, soft spots and bags that lose vacuum in the walk-in. Fitting a fresh Atmovac bar puts the seal back to factory condition on the machine you already own. The bar lifts off its cylinders inside the chamber, and the sealing and cut-off wires ride under Teflon tape so the bag never sticks to the hot wire. Order one bar per seal position you are replacing.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822270808222,"sku":"EUR-0300325","price":380.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/300126_20-_20300215_20-_20300222_20-_20300325_9510f706-dcf3-4bd6-8834-573fff352a93.jpg?v=1793100139"},{"product_id":"atmovac-0307701-inclined-surface-10-25-inch-stainless-steel-for-arctic-11","title":"Atmovac 0307701 Inclined Surface, 10.25-Inch Stainless Steel — for ARCTIC 11","description":"\u003cp\u003eSoup in a flat bag runs straight to the seal bar the moment the chamber pulls vacuum, and wet film does not weld. This 10.25-inch stainless steel inclined surface sets into the chamber of the Atmovac ARCTIC 11 and props the bag at an angle, so the liquid pools at the low end and the open neck lies dry across the bar.\u003c\/p\u003e\u003cp\u003eThat is the difference between bagging stocks, sauces, marinades and braises on the chamber machine and ladling them into deli containers. On the ARCTIC 11 it turns a compact countertop machine into one that handles the wet side of prep too. Fill the bag no more than a third full, lay the neck over the bar and let the plate do the rest; the stainless sheet lifts out and washes like any other smallware.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822277492894,"sku":"EUR-0307701","price":99.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/inclined-insert-plate-for-atmovac-chamber-vacuum-machines.jpg?v=1793039925"},{"product_id":"atmovac-0307702-inclined-surface-12-25-inch-stainless-steel-for-chinook-14-and-chinook-14","title":"Atmovac 0307702 Inclined Surface, 12.25-Inch Stainless Steel — for CHINOOK 14 and CHINOOK 14+","description":"\u003cp\u003eSoup in a flat bag runs straight to the seal bar the moment the chamber pulls vacuum, and wet film does not weld. This 12.25-inch stainless steel inclined surface sets into the chamber of the Atmovac CHINOOK 14 and CHINOOK 14+ and props the bag at an angle, so the liquid pools at the low end and the open neck lies dry across the bar.\u003c\/p\u003e\u003cp\u003eThat is the difference between bagging stocks, sauces, marinades and braises on the chamber machine and ladling them into deli containers. On a CHINOOK 14+, pair it with Liquid Control and the machine stops the vacuum the moment liquid starts to boil, then seals. Fill the bag no more than a third full, lay the neck over the bar and let the plate do the rest; the stainless sheet lifts out and washes like any other smallware.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822287257758,"sku":"EUR-0307702","price":99.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/inclined-insert-plate-for-atmovac-chamber-vacuum-machines_92810050-83e7-4bbe-8b80-65f303224512.jpg?v=1793039978"},{"product_id":"atmovac-0307703-inclined-surface-15-75-inch-stainless-steel-for-arctic-16-arctic-16d-chinook-16-oroshi-16-and-oroshi-16d","title":"Atmovac 0307703 Inclined Surface, 15.75-Inch Stainless Steel — for ARCTIC 16, ARCTIC 16D, CHINOOK 16+, OROSHI 16+ and OROSHI 16D","description":"\u003cp\u003eSoup in a flat bag runs straight to the seal bar the moment the chamber pulls vacuum, and wet film does not weld. This 15.75-inch stainless steel inclined surface sets into the chamber of the Atmovac ARCTIC 16, ARCTIC 16D, CHINOOK 16+, OROSHI 16+ and OROSHI 16D and props the bag at an angle, so the liquid pools at the low end and the open neck lies dry across the bar.\u003c\/p\u003e\u003cp\u003eThat is the difference between bagging stocks, sauces, marinades and braises on the chamber machine and ladling them into deli containers. One plate covers five machines across the 16-inch ARCTIC, CHINOOK and OROSHI lines. Fill the bag no more than a third full, lay the neck over the bar and let the plate do the rest; the stainless sheet lifts out and washes like any other smallware.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822294007966,"sku":"EUR-0307703","price":124.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/inclined-insert-plate-for-atmovac-chamber-vacuum-machines_be250315-fe29-4e59-8020-103ca6383cdc.jpg?v=1793040035"},{"product_id":"atmovac-0307704-inclined-surface-14-75-inch-stainless-steel-for-chinook-16d","title":"Atmovac 0307704 Inclined Surface, 14.75-Inch Stainless Steel — for CHINOOK 16D","description":"\u003cp\u003eSoup in a flat bag runs straight to the seal bar the moment the chamber pulls vacuum, and wet film does not weld. This 14.75-inch stainless steel inclined surface sets into the chamber of the Atmovac CHINOOK 16D and props the bag at an angle, so the liquid pools at the low end and the open neck lies dry across the bar.\u003c\/p\u003e\u003cp\u003eThat is the difference between bagging stocks, sauces, marinades and braises on the chamber machine and ladling them into deli containers. It is sized for the twin-bar CHINOOK 16D chamber. Fill the bag no more than a third full, lay the neck over the bar and let the plate do the rest; the stainless sheet lifts out and washes like any other smallware.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822300823710,"sku":"EUR-0307704","price":99.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/inclined-insert-plate-for-atmovac-chamber-vacuum-machines_1bd4f90b-10b0-4ba3-8c31-4bd08e39d99d.jpg?v=1793040088"},{"product_id":"atmovac-0307707-inclined-surface-19-125-inch-stainless-steel-for-cyclone-201d-and-cyclone-203d","title":"Atmovac 0307707 Inclined Surface, 19.125-Inch Stainless Steel — for CYCLONE 201D and CYCLONE 203D","description":"\u003cp\u003eSoup in a flat bag runs straight to the seal bar the moment the chamber pulls vacuum, and wet film does not weld. This 19.125-inch stainless steel inclined surface sets into the chamber of the Atmovac CYCLONE 201D and CYCLONE 203D and props the bag at an angle, so the liquid pools at the low end and the open neck lies dry across the bar.\u003c\/p\u003e\u003cp\u003eThat is the difference between bagging stocks, sauces, marinades and braises on the chamber machine and ladling them into deli containers. It is the long plate for the CYCLONE 201D and 203D floor machines, where batches of liquid product go through in volume. Fill the bag no more than a third full, lay the neck over the bar and let the plate do the rest; the stainless sheet lifts out and washes like any other smallware.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822312030366,"sku":"EUR-0307707","price":99.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/inclined-insert-plate-for-atmovac-chamber-vacuum-machines_e9e47aa9-ffba-451b-b565-d2d85705c18a.jpg?v=1793040141"},{"product_id":"atmovac-0903042-gas-flush-kit-left-and-right-seal-bars-for-pampero-30-20d3","title":"Atmovac 0903042 Gas Flush Kit, Left and Right Seal Bars — for PAMPERO 30\/20D3","description":"\u003cp\u003eFull vacuum crushes a croissant and turns fresh beef dark. Gas flush fixes both: after the chamber pulls vacuum, the machine injects protective gas into the bag, then seals it, so the pack holds its shape and the product keeps its color and appearance on the shelf. This kit brings that capability to the Atmovac PAMPERO 30\/20D3 industrial floor machine, built for the version with left and right sealing bars.\u003c\/p\u003e\u003cp\u003eThe kit plugs into a regulated gas supply at a 0.24-inch connector and draws 60 to 100 liters per minute, at a maximum supply pressure of 14.5 psi. Once it is fitted, gas is set per program on the machine, alongside vacuum and seal time, so a red-meat program and a pastry program can each carry their own setting. Installation is done by a qualified technician, either when the machine is ordered or later on a machine already in service.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822327824542,"sku":"EUR-0903042","price":1391.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/903042.jpg?v=1793100150"},{"product_id":"atmovac-0930120-liquid-control-kit-for-chinook-and-cyclone-machines-non-plus-models","title":"Atmovac 0930120 Liquid Control Kit — for CHINOOK and CYCLONE Machines (Non-Plus Models)","description":"\u003cp\u003ePull too much vacuum on a bag of stock and it boils in the chamber, spraying product over the seal, into the chamber and into the pump oil. Liquid Control stops that from happening. This kit retrofits it to the CHINOOK and CYCLONE machines that left the factory without it; the plus models already carry Liquid Control as standard. A highly sensitive sensor watches for the instant moisture in the product starts to evaporate, ends the vacuum stage right there and seals the bag, so the liquid stays in the pack, the yield stays on the scale and the pump never takes on water.\u003c\/p\u003e\u003cp\u003eOnce the kit is fitted, Liquid Control is switched on or off program by program, so your soup program uses it and your steak program does not. Liquid Control+ adds a set number of seconds of vacuum after the boiling point for product that can take a little more. Installation is done by a qualified technician.\u003c\/p\u003e","brand":"Atmovac","offers":[{"title":"Default Title","offer_id":67822333362334,"sku":"EUR-0930120","price":1231.94,"currency_code":"CAD","in_stock":true}]},{"product_id":"minipack-mx3-left-right-seal-bar-kit-kr231056-two-14-25-seal-bars","title":"Minipack MX3 Left \u0026 Right Seal Bar Kit KR231056 — Two 14.25\" Seal Bars","description":"\u003cp\u003eTurn a front-and-back MX3 into a left-and-right machine. Minipack kit KR231056 sets your MX3 chamber vacuum sealer up with two 14.25-inch seal bars on the left and right sides of the chamber, 9.25 inches apart, in place of its standard pair of 12.5-inch front and back bars.\u003c\/p\u003e\u003cp\u003eThose extra 1.75 inches of bar are what you are buying. Bags up to the full width of the longer bars lie flat across the seal instead of being folded or trimmed down, which is where wrinkled, leaking welds come from. The kit gives an MX3 already on your counter the same layout as Minipack's factory Left \u0026amp; Right model, MV23IE02, so you can match the machine to the bags you stock today without replacing it.\u003c\/p\u003e","brand":"Minipack","offers":[{"title":"Default Title","offer_id":67881947988126,"sku":"GBS-MX3-LRKIT","price":1386.78,"currency_code":"CAD","in_stock":true}]},{"product_id":"minipack-mx5-left-right-seal-bar-kit-kr251001-two-18-seal-bars","title":"Minipack MX5 Left \u0026 Right Seal Bar Kit KR251001 — Two 18\" Seal Bars","description":"\u003cp\u003eLoad your MX5 from the sides. Minipack kit KR251001 moves the MX5's sealing from its standard pair of 22-inch front and back bars to two 18-inch bars running along the left and right sides of the chamber.\u003c\/p\u003e\u003cp\u003eIt gives an MX5 already in your kitchen the same bar arrangement as Minipack's factory Left \u0026amp; Right model, MV25IE02, so the machine can follow your packaging as it changes. Bags go in from the sides of the 22.5\" W x 18.75\" D chamber, a layout some kitchens prefer when they load several bags per cycle around the center of the chamber.\u003c\/p\u003e","brand":"Minipack","offers":[{"title":"Default Title","offer_id":67881948283038,"sku":"GBS-MX5-LRKIT","price":1720.44,"currency_code":"CAD","in_stock":true}]}],"url":"https:\/\/directfoodequipment.com\/collections\/bag-sealer-accessories.oembed","provider":"Direct Food Equipment","version":"1.0","type":"link"}