{"title":"Back Bar Solid Refrigerators","description":"\u003cp\u003eBack bar solid refrigerators hold beer, mixers, and prepped garnishes behind the well with insulated doors that keep temperatures stable in a hot, busy bar. Solid fronts cut the energy loss a glass panel allows and resist the scuffs that come with constant traffic, which makes them practical for high-volume bars, nightclubs, and banquet service where stock does not need merchandising. Widths around 49\", 61\", and 73\" match common back bar runs, with slim-line depths for tight spaces. Compare \u003ca href=\"\/collections\/back-bar-glass-refrigerators\"\u003eglass door back bar coolers\u003c\/a\u003e for display, or see the wider \u003ca href=\"\/collections\/bar-refrigeration\"\u003ebar refrigeration\u003c\/a\u003e category.\u003c\/p\u003e","products":[{"product_id":"fagor-fbb-36-n-back-bar-refrigerator-one-solid-door-36-3-4-wide","title":"Fagor FBB-36-N Back Bar Refrigerator, One Solid Door — 36-3\/4\" Wide","description":"\u003cp\u003eThe FBB-36-N is the one-door build in Fagor's Next Generation back bar line, and it is the cabinet to reach for when there is exactly one gap left in the bar. It measures 36-3\/4\" wide, 29\" deep and 36-7\/8\" tall, swallows 430 twelve-ounce cans, 254 bottles or two kegs, and breathes entirely out the front — so it can sit inside a run of millwork with the neighboring cabinets hard against both sides and still hold temperature on a 100°F night.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 430 twelve-ounce cans, 254 twelve-ounce bottles, or 2 kegs. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/10 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 solid door, black vinyl exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257127415966,"sku":"GBS-FBB-36-N","price":4493.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1607eb67-a011-08d0-d81c-b1b7019f28b7.jpg?v=1789748502"},{"product_id":"fagor-fbb-36s-n-stainless-back-bar-refrigerator-one-solid-door-36-3-4-wide","title":"Fagor FBB-36S-N Stainless Back Bar Refrigerator, One Solid Door — 36-3\/4\" Wide","description":"\u003cp\u003eThe FBB-36S-N is the 36-3\/4\" single-door back bar cabinet built with a stainless steel front and sides instead of the black vinyl of the base model. Everything behind the skin is identical — 430 twelve-ounce cans, 254 bottles, two kegs, front-breathing 1\/10 HP refrigeration — but the stainless exterior is what lets it live in an open service area, a hotel lobby bar or a stadium concourse where the cabinet is part of the finish schedule.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 430 twelve-ounce cans, 254 twelve-ounce bottles, or 2 kegs. Two adjustable epoxy-coated shelves come in the box. Fagor's standard split for this line is flat shelves behind one door and adjustable bottle rails behind the rest, which on a single-door cabinet means a pair of flat shelves you can reset as the stock list changes. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/10 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 36-3\/4\" wide by 29\" deep by 36-7\/8\" high, and ships at 275 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 1.5 amps on a 115 volt circuit through a 1\/10 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 2 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 solid door, stainless steel exterior, 36-3\/4\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257129316510,"sku":"GBS-FBB-36S-N","price":5257.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Series-115V-36_75-Stainless-Steel-Singe-Solid-Door-Back-Bar-Refrigerator-FBB-36S-N.jpg?v=1791295852"},{"product_id":"fagor-fbb-59-n-back-bar-refrigerator-two-solid-doors-59-1-2-wide","title":"Fagor FBB-59-N Back Bar Refrigerator, Two Solid Doors — 59-1\/2\" Wide","description":"\u003cp\u003eTwo solid doors across 59-1\/2\" make the FBB-59-N the everyday workhorse of the Next Generation back bar line. It carries 852 twelve-ounce cans, 486 bottles or three kegs, which is roughly double what the single-door FBB-36-N holds for 23\" more bar — the point at which most operators stop restocking mid-shift and start restocking once a day.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 852 twelve-ounce cans, or 486 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257130594462,"sku":"GBS-FBB-59-N","price":4728.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/8883cd83-1d7b-2610-702c-3d19e49f14bb.jpg?v=1789748518"},{"product_id":"fagor-fbb-59s-n-stainless-back-bar-refrigerator-two-solid-doors-59-1-2-wide","title":"Fagor FBB-59S-N Stainless Back Bar Refrigerator, Two Solid Doors — 59-1\/2\" Wide","description":"\u003cp\u003eTwo solid stainless doors across 59-1\/2\" give the FBB-59S-N a front that reads as kitchen equipment rather than bar millwork, which is exactly what is wanted when the cabinet sits in the open. Capacity matches the black vinyl FBB-59-N to the can: 852 twelve-ounce cans, 486 bottles or three kegs, four adjustable shelves, one 115V circuit.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 852 twelve-ounce cans, or 486 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 59-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 307 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, stainless steel exterior, 59-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257135673502,"sku":"GBS-FBB-59S-N","price":5531.25,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-69-n-back-bar-refrigerator-two-solid-doors-69-1-2-wide","title":"Fagor FBB-69-N Back Bar Refrigerator, Two Solid Doors — 69-1\/2\" Wide","description":"\u003cp\u003eThe FBB-69-N buys capacity without buying a third door swing. It is 10\" wider than the FBB-59-N and still runs two doors, and that 10\" is worth 162 more cans: 1,014 twelve-ounce cans, 594 bottles or three kegs behind a pair of solid black vinyl doors. In a well where every door that opens into the aisle costs the bartender a step, the widest two-door cabinet in the line is often the right answer.\u003c\/p\u003e\u003cp\u003eCount it in kegs and three fit; count it in bottles and it is 594; count it in twelve-ounce cans and it is 1,014. Fagor publishes all three because no two bars count stock the same way. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257139802270,"sku":"GBS-FBB-69-N","price":5189.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/727fce02-610f-99b1-fd63-2b0aa1b4af01.jpg?v=1789748531"},{"product_id":"fagor-fbb-69s-n-stainless-back-bar-refrigerator-two-solid-doors-69-1-2-wide","title":"Fagor FBB-69S-N Stainless Back Bar Refrigerator, Two Solid Doors — 69-1\/2\" Wide","description":"\u003cp\u003eThe FBB-69S-N puts a stainless front and sides on the widest two-door cabinet in the line. 69-1\/2\" wide, 1,014 twelve-ounce cans, 594 bottles, three kegs — and an exterior that wipes down with a bar rag and does not scuff the way a vinyl panel does when kegs and cases go past it a hundred times a shift.\u003c\/p\u003e\u003cp\u003eCount it in kegs and three fit; count it in bottles and it is 594; count it in twelve-ounce cans and it is 1,014. Fagor publishes all three because no two bars count stock the same way. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 69-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 332 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, stainless steel exterior, 69-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257140916382,"sku":"GBS-FBB-69S-N","price":6069.75,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-79-n-back-bar-refrigerator-three-solid-doors-80-wide","title":"Fagor FBB-79-N Back Bar Refrigerator, Three Solid Doors — 80\" Wide","description":"\u003cp\u003eThree solid doors and a cabinet that measures a true 80\" wide put the FBB-79-N in the service well of a bar that runs hard. Behind the doors sit 1,092 twelve-ounce cans, 702 bottles or four kegs, split across three sections so two bartenders can work opposite ends of the same cabinet without reaching over each other.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 1,092 twelve-ounce cans across 3 doors is roughly 364 cans a section, alongside a published 702 bottles or 4 kegs for the whole cabinet. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with R-290, a natural hydrocarbon refrigerant, and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/3 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257145667742,"sku":"GBS-FBB-79-N","price":5894.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/dffc9ab0-c72a-a898-71d7-1e19792eba07.jpg?v=1789748543"},{"product_id":"fagor-fbb-79s-n-stainless-back-bar-refrigerator-three-solid-doors-80-wide","title":"Fagor FBB-79S-N Stainless Back Bar Refrigerator, Three Solid Doors — 80\" Wide","description":"\u003cp\u003eThree solid stainless doors on an 80\" cabinet make the FBB-79S-N the specification for open-plan bars and back-of-house service wells that are visible from the floor. It holds 1,092 twelve-ounce cans, 702 bottles or four kegs across three sections, on six adjustable shelves, drawing 3.0 amps from an ordinary outlet.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 1,092 twelve-ounce cans across 3 doors is roughly 364 cans a section, alongside a published 702 bottles or 4 kegs for the whole cabinet. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 80\" wide by 29\" deep by 36-7\/8\" high, and ships at 396 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, stainless steel exterior, 80\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257149567134,"sku":"GBS-FBB-79S-N","price":6897.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-95-n-back-bar-refrigerator-three-solid-doors-95-1-2-wide","title":"Fagor FBB-95-N Back Bar Refrigerator, Three Solid Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95-N is the largest cabinet Fagor builds in the Next Generation back bar line: 95-1\/2\" of three-door, solid-front storage holding 1,302 twelve-ounce cans, 864 bottles or five kegs. That is a full Friday night of bottled and canned stock in one cabinet, on one 3.0-amp circuit, with one compressor to service instead of two units to keep in step.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,302 twelve-ounce cans, 864 twelve-ounce bottles, or 5 kegs. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/3 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257150582942,"sku":"GBS-FBB-95-N","price":6091.5,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-95s-n-stainless-back-bar-refrigerator-three-solid-doors-95-1-2-wide","title":"Fagor FBB-95S-N Stainless Back Bar Refrigerator, Three Solid Doors — 95-1\/2\" Wide","description":"\u003cp\u003eThe FBB-95S-N is the flagship of the line in stainless: 95-1\/2\" wide, three solid stainless doors, 1,302 twelve-ounce cans, 864 bottles or five kegs. Stainless front and sides over the same 18-gauge stainless top and stainless interior means the entire visible cabinet is one material — a finish that holds up in a stadium, an arena club or any bar where the equipment never gets to hide.\u003c\/p\u003e\u003cp\u003eCapacity is published three ways because bars stock three ways: 1,302 twelve-ounce cans, 864 twelve-ounce bottles, or 5 kegs. Six adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 29\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eConstruction starts with a heavy-duty 18-gauge stainless steel top over an interior of heavy-duty stainless steel walls closing onto a coved-corner NSF-approved stainless steel floor, so there is no square seam for a spill to hide in. The exterior is stainless steel on the front and sides over a galvanized back panel — the finish to specify when the cabinet is visible, because it wipes clean with a bar rag and will not scuff or peel the way a vinyl panel does after a season of kegs and case carts past it. Doors are heavy-duty stainless steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/3 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 95-1\/2\" wide by 29\" deep by 36-7\/8\" high, and ships at 429 lb. Electrically it is undemanding: 3.0 amps on a 115 volt circuit through a 1\/3 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are low-profile or heavy-duty castors on a reinforced rail, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Low-profile castors with reinforced rail; heavy-duty castors with reinforced rail; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, stainless steel exterior, 95-1\/2\" x 29\" x 36-7\/8\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257152090270,"sku":"GBS-FBB-95S-N","price":7128.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-24-48-slim-line-back-bar-refrigerator-two-solid-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48 Slim Line Back Bar Refrigerator, Two Solid Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48 exists for one reason: at 24-5\/8\" deep it fits behind a bar where a standard 29\" back bar cabinet will not. Four and a bit inches sounds like nothing until the bartender has to walk the aisle between the cabinet and the rail all night. Inside that slim footprint are two solid doors, 300 twelve-ounce cans, 180 bottles or two kegs across a 49-5\/8\" cabinet standing 35-1\/2\" tall.\u003c\/p\u003e\u003cp\u003eFour adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 300 twelve-ounce cans, or 180 bottles, or 2 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eThe unit runs a self-contained capillary tube circuit on natural R-290 refrigerant, with the 1\/4 HP compressor mounted on the left side and the evaporator coil mounted to the interior left wall above it. Air moves through the box in a free-flowing pattern driven by an oversized fan motor and blade, which is what keeps the far end of the cabinet at the same 33°F to 38°F as the end nearest the coil. Because the whole system breathes through the front grill, nothing about the installation depends on clearance behind the cabinet.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 235 lb. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 49-5\/8\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257153269918,"sku":"GBS-FBB-24-48","price":3949.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/1f2f8dd0-b007-2b7c-80c4-bbcb03cd7b96.jpg?v=1789748558"},{"product_id":"fagor-fbb-24-60-slim-line-back-bar-refrigerator-two-solid-doors-62-1-4-wide-x-24-5-8-deep","title":"Fagor FBB-24-60 Slim Line Back Bar Refrigerator, Two Solid Doors — 62-1\/4\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-60 is the middle build of Fagor's slim line: 62-1\/4\" wide, still only 24-5\/8\" deep, and rated for 390 twelve-ounce cans, 234 bottles or three kegs behind two solid doors. It is the cabinet for a bar that needs three kegs' worth of storage and cannot give up the aisle depth a 29\" cabinet demands — the extra keg over the FBB-24-48 costs 12-5\/8\" of width and no depth at all.\u003c\/p\u003e\u003cp\u003eWorked out per door the numbers get concrete: 390 twelve-ounce cans across 2 doors is roughly 195 cans a section, alongside a published 234 bottles or 3 kegs for the whole cabinet. Four adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other door so the labels face out and the count is obvious without counting. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eRefrigeration is a self-contained capillary tube system charged with natural R-290 refrigerant and balanced at the factory to hold 33°F to 38°F inside the cabinet. What makes it a back bar unit rather than a reach-in is that it breathes out the front: the 1\/4 HP compressor sits on the left side and pulls and discharges air through the front grill, so the cabinet can be built in tight between millwork or pushed to a wall without losing capacity to a rear air gap. Fagor rates the redesigned system for the extreme 100°F environments a summer bar well actually reaches.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eElectrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. The cabinet measures 62-1\/4\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 290 lb. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 4 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2 solid doors, black vinyl exterior, 62-1\/4\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257156939934,"sku":"GBS-FBB-24-60","price":4404.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/aad0b1a7-821b-eb3b-6f7f-46626dcb3ba5.jpg?v=1789748559"},{"product_id":"fagor-fbb-24-72-slim-line-back-bar-refrigerator-three-solid-doors-72-wide-x-24-5-8-deep","title":"Fagor FBB-24-72 Slim Line Back Bar Refrigerator, Three Solid Doors — 72\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eSix feet of slim line: the FBB-24-72 runs a full 72\" wide and three solid doors while holding the line at 24-5\/8\" deep. It takes 540 twelve-ounce cans, 324 bottles or three kegs on six adjustable shelves, which makes it the largest cabinet available to a bar whose back wall simply cannot accept a 29\"-deep box.\u003c\/p\u003e\u003cp\u003eSix adjustable epoxy-coated shelves come in the box, two per door, and they are split the way a working bar wants them: flat shelves behind one door for cases and bulk, adjustable bottle rails behind the other two doors so the labels face out and the count is obvious without counting. Loaded that way the cabinet takes 540 twelve-ounce cans, or 324 bottles, or 3 kegs — whichever unit the distributor delivers in. Interior height takes tall boys three high, and the shelving carries beer the full depth of the cabinet, so the back half of a 24-5\/8\" box is storage rather than dead air.\u003c\/p\u003e\u003cp\u003eThe exterior is black vinyl on the front, sides and back over a galvanized back panel — the finish to buy when the cabinet lives behind a bar front and the guest never sees it, because the budget goes into the stainless top and stainless interior that actually take the abuse. Above it sits a heavy-duty 18-gauge stainless steel top, and inside are heavy-duty stainless steel walls and a coved-corner NSF-approved stainless steel floor, with no square seam for a spill to hide in. Doors are heavy-duty black vinyl over steel; every door locks, and the reinforced bottom door frame is there to survive being stood on. Magnetic door gaskets pull out for cleaning without tools, and plastic breaker strips at every opening retard condensate before it can form. The whole shell is insulated with 2\" of Ecomate R5 foam, CFC-free polyurethane foamed in place.\u003c\/p\u003e\u003cp\u003eCabinets are designed to hold 33°F to 38°F, and the Next Generation redesign is rated to do it in the 100°F ambient a packed bar produces on a July night. The 1\/4 HP self-contained system uses natural R-290 refrigerant, a side-mounted evaporator above the left-hand compressor, and a free-flowing air pattern rather than a single cold spot. It is front breathing end to end, which is the whole reason a cabinet this size can be built into a bar back at all.\u003c\/p\u003e\u003cp\u003eService was designed in rather than bolted on. The condensing unit sits behind the front grill on a slide-out rail system, so a tech pulls it forward to clean the coil instead of pulling the cabinet out of the millwork. Condensate handling is automatic — the evaporator drains to a pan inside the compressor housing where it evaporates, so there is no drain line to run and no floor sink to find. Interior lighting is an LED strip mounted underneath the mullion, tucked up out of the way of bottles, cases and hands.\u003c\/p\u003e\u003cp\u003eThe depth is the specification that matters here. A conventional back bar cabinet is 29\" front to back; the FBB-24 line is 24-5\/8\", and those 4-3\/8\" come straight back to the bartender as aisle. In a well where two people pass behind the rail all night, or where the bar back was framed before anyone measured a cooler, that is the difference between refrigeration behind the bar and a trip to the walk-in every time the rail runs dry. It gives up nothing to get there: the interior still stacks tall boys three high and still takes beer the full depth of the box.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 72\" wide by 24-5\/8\" deep by 35-1\/2\" high, and ships at 340 lb. Electrically it is undemanding: 2.0 amps on a 115 volt circuit through a 1\/4 HP compressor, shipping with an 8' cord and a NEMA 5-15P plug that goes into an ordinary outlet. Options are additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs, and a 220 volt \/ 50 cycle \/ 1 phase build for export. The unit conforms to UL and NSF-7 standards and is 2017 DOE compliant, and it carries a 3-year parts and labor warranty plus 2 additional years on the compressor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with:\u003c\/strong\u003e 6 adjustable epoxy-coated shelves (two per door), 8' power cord with NEMA 5-15P plug, a lock on every door, interior LED light under the mullion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Additional adjustable rails; 3\" castors; 6\" adjustable stainless steel legs; 220 volts \/ 50 cycles \/ 1 phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 3 solid doors, black vinyl exterior, 72\" x 24-5\/8\" x 35-1\/2\" cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":48257159266462,"sku":"GBS-FBB-24-72","price":4966.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/75e5072f-a3ee-a394-3957-6a7b5e701b43.jpg?v=1789748561"},{"product_id":"arctic-air-abb48-back-bar-refrigerator-2-solid-doors-49-12-5-cu-ft","title":"Arctic Air ABB48 Back Bar Refrigerator — 2 Solid Doors, 49\", 12.5 Cu Ft","description":"\u003cp\u003e12.5 cubic feet of cold storage behind 2 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB48 is a 49-inch back bar refrigerator for the working side of the bar — room for 48 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 49-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 49.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 280 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271539863710,"sku":"WR-ABB48","price":2199.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb48-big.jpg?v=1789748962"},{"product_id":"arctic-air-abb60-back-bar-refrigerator-2-solid-doors-61-16-7-cu-ft","title":"Arctic Air ABB60 Back Bar Refrigerator — 2 Solid Doors, 61\", 16.7 Cu Ft","description":"\u003cp\u003e16.7 cubic feet of cold storage behind 2 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB60 is a 61-inch back bar refrigerator for the working side of the bar — room for 72 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 61-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 4 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 2\/5 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 61.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 320 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271574728862,"sku":"WR-ABB60","price":2552.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb60-big.jpg?v=1789749084"},{"product_id":"arctic-air-abb72-back-bar-refrigerator-3-solid-doors-73-20-7-cu-ft","title":"Arctic Air ABB72 Back Bar Refrigerator — 3 Solid Doors, 73\", 20.7 Cu Ft","description":"\u003cp\u003e20.7 cubic feet of cold storage behind 3 locking solid doors, in a cabinet 24 inches deep. The Arctic Air ABB72 is a 73-inch back bar refrigerator for the working side of the bar — room for 84 six-packs of 12 oz cans, held between 33°F and 41°F while the doors swing every ninety seconds through a Friday night.\u003c\/p\u003e\u003cp\u003eA ventilated stainless steel duct runs the full length of the interior ceiling and drops cold air down across every section, so the last bottle at the far end of a 73-inch cabinet comes out as cold as the one sitting over the compressor. Overhead placement is the point — a row of tall bottles cannot block that airflow the way it blocks a rear-wall discharge, so one crowded section never warms up on you. An electronic thermostat with an external digital LED readout holds the setpoint, and interior LED lighting means a bartender finds the right bottle at one in the morning without opening two more doors.\u003c\/p\u003e\u003cp\u003eThe front and sides are black powder-coated steel, which hides fingerprints and disappears behind a bar front, and the top is 1.5-inch solid foamed stainless steel you can work on. Inside it is bright stainless with a coved-corner floor that wipes out in one pass. Every door locks, and the magnetic gaskets pull out for cleaning without a tool — which is what keeps a back bar box passing inspection three years in. Two epoxy-coated adjustable shelves ship with each door section, 6 in all.\u003c\/p\u003e\u003cp\u003eRuns on a standard 115V wall outlet — NEMA 5-15P, 3 amps, 7-foot cord — on a self-contained 3\/7 HP capillary-tube system charged with R290 hydrocarbon refrigerant, which draws less power than the blends it replaced. The condensing unit sits at the bottom and comes out the front, so pulling lint off the coil is a five-minute job that never involves dragging the cabinet away from the wall. Overall 73.125\" W x 24\" D x 39.625\" H including the 3.375\" casters, two of which lock, and 360 pounds on the crate. Three years parts and labor, six years on the compressor.\u003c\/p\u003e\u003cp\u003eArctic Air builds this cabinet to NSF Standard 7 requirements for open food storage and runs every unit through quality control before it is crated. If your floor plan needs more clearance underneath — for a mat, a drain, or a mop head — larger 5.75-inch casters are available as a set of four under part #67000K.\u003c\/p\u003e","brand":"Arctic Air","offers":[{"title":"Default Title","offer_id":48271575122078,"sku":"WR-ABB72","price":3044.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/back-bar-refrigerator-abb72-big.jpg?v=1789749099"},{"product_id":"new-air-nbb-23-sb-23-inch-solid-door-back-bar-cooler-7-8-cu-ft-115v","title":"New Air NBB-23-SB 23-Inch Solid Door Back Bar Cooler — 7.8 cu. ft., 115V","description":"\u003cp\u003e7.8 cubic feet of cold storage in a cabinet 23 1\/2 inches wide. The New Air NBB-23-SB fills the slot at the end of a bar run or beside the ice well and holds cases of bottles and cans at 32°F to 41°F right where your bartenders reach, so nobody leaves the rail to restock from the walk-in mid-shift.\u003c\/p\u003e\u003cp\u003eA Carel digital controller sets and holds temperature from the front of the cabinet: you read a number instead of guessing. Two shelves split the 19 1\/2 x 26 x 29-inch interior into stacked rows of product, LED lighting shows every label when the door opens, and the solid black door keeps back stock out of the guest's view. The door closes itself and locks, so cold air stays in through service and inventory stays put after close.\u003c\/p\u003e\u003cp\u003eIt runs on 115V at 1.9 amps through a NEMA 5-15P cord, which means it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. Casters ship with it, so you can roll it out to clean behind it, and the stainless steel top gives you a landing spot for glassware at the bar. At 132 pounds with CFC-free R-290 refrigerant, it is ETL listed and ready to load the day it arrives.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521747521694,"sku":"DTX-NBB-23-SB","price":1869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-23-sb-1.png?v=1790231149"},{"product_id":"new-air-nbb-48-sb-n-48-inch-narrow-solid-door-back-bar-cooler-12-cu-ft-115v","title":"New Air NBB-48-SB-N 48-Inch Narrow Solid Door Back Bar Cooler — 12 cu. ft., 115V","description":"\u003cp\u003eTwenty-four and a half inches deep. That is the number that gets the New Air NBB-48-SB-N into a back bar corridor where a standard-depth cooler would pinch the walkway, and it still carries 12 cubic feet of cold storage across a 48 3\/4-inch run.\u003c\/p\u003e\u003cp\u003eFour shelves at 17 1\/2 x 18 1\/4 inches organize the 36 1\/2 x 18 1\/2 x 30 1\/2-inch interior into rows sized for cases of bottles and cans, and LED lighting shows every one of them. A Carel digital controller holds 32°F to 41°F and reads out on the front, so temperature checks take a glance. The solid black doors close themselves and lock, keeping cold air in during service and inventory secure after close.\u003c\/p\u003e\u003cp\u003eIt draws 2.9 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. The stainless steel top stands 35 5\/8 inches high as a working ledge for garnish trays and glassware, adjustable legs level it on an uneven floor, and casters are available as an option. It weighs 231 pounds, runs on CFC-free R-290 refrigerant, and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521848021150,"sku":"DTX-NBB-48-SB-N","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-48-sb-n-1.png?v=1790231186"},{"product_id":"new-air-nbb-60-sb-60-inch-solid-door-back-bar-cooler-19-cu-ft-115v","title":"New Air NBB-60-SB 60-Inch Solid Door Back Bar Cooler — 19 cu. ft., 115V","description":"\u003cp\u003eNineteen cubic feet under a 58 3\/4-inch stainless top. The New Air NBB-60-SB carries a full night of bottled beer, wine and mixers behind locking solid doors, giving a mid-size bar enough cold storage to get through Friday without a restock run.\u003c\/p\u003e\u003cp\u003eInside, four 22 1\/2 x 21 1\/2-inch shelves span a 46 1\/4 x 22 1\/2 x 30 1\/2-inch interior, deep enough to stack product several rows back. The Carel digital controller holds 32°F to 41°F from the front panel, and LED lighting lets a bartender find the right bottle without digging. The solid black doors swing shut on their own and lock, so cold air stays in during service and inventory stays secure after close.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 58 3\/4 x 27 3\/4 x 36 1\/4 inches, and adjustable legs level it against the back bar, with casters available as an option. It draws 2.9 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. It weighs 254 pounds, runs on CFC-free R-290 refrigerant and is ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521851592862,"sku":"DTX-NBB-60-SB","price":2869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-60-sb-1.png?v=1790231187"},{"product_id":"new-air-nbb-69-sb-69-inch-solid-door-back-bar-cooler-23-5-cu-ft-115v","title":"New Air NBB-69-SB 69-Inch Solid Door Back Bar Cooler — 23.5 cu. ft., 115V","description":"\u003cp\u003e23.5 cubic feet across a 69 1\/4-inch run. The New Air NBB-69-SB is a solid door back bar cooler for bars that go through cases, not six-packs, holding bottled beer, wine and mixers at 32°F to 41°F under a stainless top your bartenders can work on.\u003c\/p\u003e\u003cp\u003eThe 56 1\/2 x 22 1\/2 x 30 1\/2-inch interior takes four 27 3\/4 x 21 1\/4-inch shelves, wide enough to line up full cases side by side. A Carel digital controller on the front holds your set point and shows it at a glance, and LED lighting means nobody hunts for a bottle in the dark. The solid black doors close themselves and lock, keeping cold air in during a rush and inventory secure overnight.\u003c\/p\u003e\u003cp\u003eOverall it measures 69 1\/4 x 27 3\/4 x 36 1\/4 inches and weighs 298 pounds, with adjustable legs and optional casters. It draws 4.0 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. CFC-free R-290 refrigerant, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521855426718,"sku":"DTX-NBB-69-SB","price":3189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-69-sb-1.png?v=1790231193"},{"product_id":"new-air-nbb-72-sb-n-72-inch-narrow-solid-door-back-bar-cooler-19-6-cu-ft-115v","title":"New Air NBB-72-SB-N 72-Inch Narrow Solid Door Back Bar Cooler — 19.6 cu. ft., 115V","description":"\u003cp\u003eSix feet of back bar cold storage that sits just 24 1\/2 inches deep. The New Air NBB-72-SB-N stretches 72 3\/4 inches along the wall and packs 19.6 cubic feet behind locking solid doors, built for long, shallow bars where a standard-depth cooler would eat the walkway.\u003c\/p\u003e\u003cp\u003eSix shelves, at 19 3\/4 x 18 inches and 19 1\/2 x 18 inches, divide the 60 x 18 3\/4 x 30-inch interior so beer, wine and mixers each get their own place. The Carel digital controller holds 32°F to 41°F and reads out on the front, and LED lighting puts every label in view when a door opens. The solid black doors are self-closing and lock, keeping cold air in and stock secure.\u003c\/p\u003e\u003cp\u003eAt 36 1\/4 inches high, the stainless steel top lines up as a working ledge along the full run. It draws 4.0 amps on 115V through a NEMA 5-15P cord, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. Adjustable legs and optional casters, CFC-free R-290 refrigerant, 310 pounds, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521857491102,"sku":"DTX-NBB-72-SB-N","price":3439.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-72-sb-n-1.png?v=1790231194"},{"product_id":"new-air-nbb-90-sb-90-inch-solid-door-back-bar-cooler-32-cu-ft-115v","title":"New Air NBB-90-SB 90-Inch Solid Door Back Bar Cooler — 32 cu. ft., 115V","description":"\u003cp\u003eThirty-two cubic feet of cold storage, the largest in this back bar line, across a 90 1\/2-inch cabinet. The New Air NBB-90-SB is built for high-volume bars: it holds a full night's beer, wine and mixers at 32°F to 41°F behind locking solid doors and puts a long stainless work surface on top.\u003c\/p\u003e\u003cp\u003eThe 77 3\/4 x 22 x 30 1\/2-inch interior carries six shelves at 25 x 21 1\/2 inches, so beer, wine and mixers can each get whole shelves of their own. A Carel digital controller holds temperature from the front, and LED lighting shows every row. Self-closing, locking doors hold cold air in when the bar is three deep and keep stock secure after close.\u003c\/p\u003e\u003cp\u003eIt measures 90 1\/2 x 27 3\/4 x 36 1\/4 inches and weighs 364 pounds, with adjustable legs and optional casters. Even at this size it draws 4.7 amps on 115V through a NEMA 5-15P plug, so it \u003cstrong\u003eplugs into a standard outlet\u003c\/strong\u003e. CFC-free R-290 refrigerant, ETL listed.\u003c\/p\u003e","brand":"New Air","offers":[{"title":"Default Title","offer_id":50521863192734,"sku":"DTX-NBB-90-SB","price":3919.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/new-air-nbb-90-sb-1.png?v=1790231199"},{"product_id":"fagor-fbb-24-48s-stainless-slim-line-back-bar-refrigerator-two-solid-doors-49-5-8-wide-x-24-5-8-deep","title":"Fagor FBB-24-48S Stainless Slim Line Back Bar Refrigerator, Two Solid Doors — 49-5\/8\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-48S is the stainless steel version of Fagor's shallow back bar: two stainless steel doors across a cabinet 49-5\/8\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 300 twelve-ounce cans, 360 twelve-ounce bottles or 2 kegs, so you can size it against however your distributor delivers. 4 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. An LED strip under the mullion lights the shelves for loading and picking.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 49-5\/8\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 235 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600744677534,"sku":"GBS-FBB-24-48S","price":4618.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-49_62-Stainless-Steel-Finish-Double-Solid-Door-Back-Bar-Refrigerator-FBB-24-48S.jpg?v=1792178113"},{"product_id":"fagor-fbb-24-60s-stainless-slim-line-back-bar-refrigerator-two-solid-doors-62-1-4-wide-x-24-5-8-deep","title":"Fagor FBB-24-60S Stainless Slim Line Back Bar Refrigerator, Two Solid Doors — 62-1\/4\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-60S is the stainless steel version of Fagor's shallow back bar: two stainless steel doors across a cabinet 62-1\/4\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 390 twelve-ounce cans, 450 twelve-ounce bottles or 3 kegs, so you can size it against however your distributor delivers. 4 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. An LED strip under the mullion lights the shelves for loading and picking.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 62-1\/4\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 290 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600745988254,"sku":"GBS-FBB-24-60S","price":5153.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-62_25-Stainless-Steel-Finish-Double-Solid-Door-Back-Bar-Refrigerator-FBB-24-60S.jpg?v=1792178131"},{"product_id":"fagor-fbb-24-72s-stainless-slim-line-back-bar-refrigerator-three-solid-doors-72-wide-x-24-5-8-deep","title":"Fagor FBB-24-72S Stainless Slim Line Back Bar Refrigerator, Three Solid Doors — 72\" Wide x 24-5\/8\" Deep","description":"\u003cp\u003eThe FBB-24-72S is the stainless steel version of Fagor's shallow back bar: three stainless steel doors across a cabinet 72\" wide and only 24-5\/8\" deep. That depth is more than four inches shy of a standard 29\" back bar, and those inches come straight back to the bartender as aisle — the difference between two people passing behind the rail and one person waiting.\u003c\/p\u003e\u003cp\u003eIt holds 540 twelve-ounce cans, 612 twelve-ounce bottles or 3 kegs, so you can size it against however your distributor delivers. 6 adjustable epoxy-coated shelves come standard, two per door, with flat shelves behind one door for cases and adjustable bottle rails behind the rest so labels face out. The interior stacks tall boys three high and carries beer the full depth of the box. An LED strip under the mullion lights the shelves for loading and picking.\u003c\/p\u003e\u003cp\u003eStainless steel on the front and sides is the finish to choose when the cabinet faces the guest or sits in an open service area, because it matches the rest of the bar and wipes clean. The top is heavy-duty 18-gauge stainless, the interior walls are heavy-duty stainless steel over a coved-corner NSF-approved stainless floor, and the back panel is galvanized. Every door locks, the magnetic gaskets pull out by hand, plastic breaker strips at the openings slow condensate, the bottom door frame is reinforced, and 2\" of foamed-in-place Ecomate R5 foam insulates the shell. Doors are field interchangeable between solid and glass, so the cabinet can change roles later.\u003c\/p\u003e\u003cp\u003eThe refrigeration is fully front breathing — the 1\/4 HP compressor sits on the left on a slide-out rail and draws and exhausts through the front grill, so the cabinet builds tight into millwork and is rated for 100°F bar environments. It is a self-contained capillary system on natural R-290 refrigerant with a side-mounted evaporator above the compressor, designed to hold 33°F to 38°F, and condensate evaporates automatically from a pan in the compressor housing with no drain line.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 72\" wide by 24-5\/8\" deep by 35-1\/2\" high and ships at 340 lb. It draws 2.0 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied. Options include additional adjustable rails, 3\" castors, 6\" adjustable stainless steel legs and a 220 volt \/ 50 cycle build. The unit conforms to UL and NSF-7 standards, is 2017 DOE compliant, and carries 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600750477470,"sku":"GBS-FBB-24-72S","price":5811.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/Fagor-FBB-Slim-Line-Series-115V-72-Stainless-Steel-Finish-Three-Solid-Door-Back-Bar-Refrigerator-FBB-24-72S.jpg?v=1792178198"},{"product_id":"fagor-fbb-24-n-back-bar-refrigerator-one-solid-door-24-7-8-wide","title":"Fagor FBB-24-N Back Bar Refrigerator, One Solid Door — 24-7\/8\" Wide","description":"\u003cp\u003eThe FBB-24-N is Fagor's narrowest bar cooler: a single solid-door cabinet 24-7\/8\" wide that holds 415 twelve-ounce cans or one keg. It is built for the gap at the end of a bar run, the corner of a service station or the spot beside an ice bin where a 36\" back bar simply will not go, and because it breathes out the back it does not need to be built into millwork to work.\u003c\/p\u003e\u003cp\u003eBehind a heavy-duty black vinyl over steel door, the cabinet is lined with heavy-duty galvanized steel walls over a coved-corner NSF-approved stainless steel floor, and it is NSF approved for bottles and pre-packaged goods. Epoxy-coated shelves carry the stock, and an LED light under the mullion lights it up without getting in the way of loading. The solid door keeps the stock out of sight and the cold in, which is what you want for back-up inventory and mixers. The door locks, the magnetic gasket comes out by hand for washing, and plastic breaker strips at the opening keep condensate from forming.\u003c\/p\u003e\u003cp\u003eUp top is a heavy-duty 18-gauge stainless steel work surface with a brushed aluminum glass rail; the front, sides and back are black vinyl, and the bottom door frame is reinforced for long service. Two inches of foamed-in-place Ecomate R5 foam insulate the shell. The refrigeration is a self-contained capillary tube system on natural R-290 refrigerant, built to hold 33°F to 38°F, with the evaporator at the top of the cabinet and a large fan driving a free-flowing air pattern through the box. Condensate evaporates automatically from a pan in the compressor housing, and the condensing unit slides out from behind the back grill for cleaning.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 24-7\/8\" wide, 30\" deep including a 2-3\/8\" bumper, and 39-3\/8\" high, and ships at 187 lb. A 1\/10 HP compressor draws 1.5 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied, so any standard outlet runs it. Additional shelves and a 220 volt \/ 50 cycle build are available. The unit conforms to UL and NSF-7 standards, carries the 2017 DOE compliance mark, and is covered by 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600752771230,"sku":"GBS-FBB-24-N","price":3072.75,"currency_code":"CAD","in_stock":true}]},{"product_id":"fagor-fbb-24s-n-stainless-back-bar-refrigerator-one-solid-door-24-7-8-wide","title":"Fagor FBB-24S-N Stainless Back Bar Refrigerator, One Solid Door — 24-7\/8\" Wide","description":"\u003cp\u003eThe FBB-24S-N is Fagor's narrowest bar cooler: a single solid-door cabinet 24-7\/8\" wide that holds 415 twelve-ounce cans or one keg. It is built for the gap at the end of a bar run, the corner of a service station or the spot beside an ice bin where a 36\" back bar simply will not go, and because it breathes out the back it does not need to be built into millwork to work.\u003c\/p\u003e\u003cp\u003eBehind a heavy-duty stainless steel door, the cabinet is lined with heavy-duty galvanized steel walls over a coved-corner NSF-approved stainless steel floor, and it is NSF approved for bottles and pre-packaged goods. Epoxy-coated shelves carry the stock, and an LED light under the mullion lights it up without getting in the way of loading. The solid door keeps the stock out of sight and the cold in, which is what you want for back-up inventory and mixers. The door locks, the magnetic gasket comes out by hand for washing, and plastic breaker strips at the opening keep condensate from forming.\u003c\/p\u003e\u003cp\u003eUp top is a heavy-duty 18-gauge stainless steel work surface with a brushed aluminum glass rail; the front, sides and back are stainless steel, and the bottom door frame is reinforced for long service. Two inches of foamed-in-place Ecomate R5 foam insulate the shell. The refrigeration is a self-contained capillary tube system on natural R-290 refrigerant, built to hold 33°F to 38°F, with the evaporator at the top of the cabinet and a large fan driving a free-flowing air pattern through the box. Condensate evaporates automatically from a pan in the compressor housing, and the condensing unit slides out from behind the back grill for cleaning.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 24-7\/8\" wide, 30\" deep including a 2-3\/8\" bumper, and 39-3\/8\" high, and ships at 187 lb. A 1\/10 HP compressor draws 1.5 amps at 115 volts through the 8' cord and NEMA 5-15P plug supplied, so any standard outlet runs it. Additional shelves and a 220 volt \/ 50 cycle build are available. The unit conforms to UL and NSF-7 standards, carries the 2017 DOE compliance mark, and is covered by 3 years parts and labor plus 2 additional years on the compressor.\u003c\/p\u003e","brand":"Fagor","offers":[{"title":"Default Title","offer_id":67600756408478,"sku":"GBS-FBB-24S-N","price":3596.25,"currency_code":"CAD","in_stock":true}]},{"product_id":"true-tbb-1-hc-23-1-2-one-door-solid-back-bar-cooler-black-1-half-barrel-115v","title":"True TBB-1-HC 23-1\/2\" One-Door Solid Back Bar Cooler — Black, 1 Half-Barrel, 115V","description":"\u003cp\u003eOnly 23-1\/2\" wide, the True TBB-1-HC is the single-door back bar cooler that fits where nothing else will: the end of a bar run, under a service station, beside a dish area. Behind its solid, locking door it holds one half-barrel or 30 six-packs of 12 oz cans.\u003c\/p\u003e\u003cp\u003eA 1\/10 HP R290 hydrocarbon system holds the cabinet at 33°F to 38°F, and ECM evaporator and condenser fan motors move a steady volume of air while running cooler and more efficiently. The solid door is foamed in place, with a black powder-coated exterior, a galvanized steel liner, a 12\" recessed handle locked in with a sheet-metal interlock and a one-piece magnetic gasket that pulls off by hand for cleaning. Two black PVC-coated wire shelves, 23-1\/4\" by 19\", adjust on 1\/2\" increments, LED lighting brightens the interior, and the stainless steel floor with a 1\/2\" reinforced lip stands up to a keg being rolled in. The exterior is black powder-coated steel with a stainless steel countertop.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 23-1\/2\" W x 31-7\/8\" D x 38-3\/4\" H and weighs 210 pounds. It draws 1.4 amps on 115V through a 7 ft cord with a NEMA 5-15P plug and is wired for a dedicated 15-amp outlet. The condensing unit is serviced from the rear of the cabinet. Red wine, white wine and chocolate thermostats are factory options. The cooler is NSF\/ANSI 7 compliant for packaged and bottled product, and True covers it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979196498078,"sku":"TRU-TBB-1-HC","price":3404.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/brrgceqvv5pkmughjnzt.webp?v=1794295199"},{"product_id":"true-tbb-1-s-hc-23-1-2-one-door-solid-back-bar-cooler-stainless-1-half-barrel-115v","title":"True TBB-1-S-HC 23-1\/2\" One-Door Solid Back Bar Cooler — Stainless, 1 Half-Barrel, 115V","description":"\u003cp\u003eStainless front, sides, countertop and door make the True TBB-1-S-HC a single-door back bar cooler that disappears into a stainless bar. At 23-1\/2\" wide it fills a narrow slot and still takes a half-barrel or 30 six-packs.\u003c\/p\u003e\u003cp\u003eRefrigeration comes from a 1\/10 HP R290 hydrocarbon system holding 33°F to 38°F, with ECM evaporator and condenser fan motors and an epoxy-coated evaporator for long life in a humid bar. The foamed-in-place solid door has a stainless exterior over a galvanized steel liner, a 12\" recessed handle anchored with a sheet-metal interlock, a positive seal and a standard lock. Two 23-1\/4\" by 19\" black PVC-coated wire shelves adjust on 1\/2\" increments, LED lighting runs inside, and a stainless steel floor with a 1\/2\" reinforced lip and a threshold protector take the knocks of daily loading. The back is matching aluminum.\u003c\/p\u003e\u003cp\u003eFootprint is 23-1\/2\" W x 31-7\/8\" D x 38-3\/4\" H, and weight is 210 pounds. It runs on 115V at 1.4 amps through a 7 ft cord and NEMA 5-15P plug, ready for a dedicated 15-amp outlet. The condensing unit is serviced from the rear. Red wine, white wine and chocolate thermostats are available from the factory. NSF\/ANSI 7 compliant for packaged and bottled product, with True coverage of 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979266195614,"sku":"TRU-TBB-1-S-HC","price":4330.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/vxkswym9xw2nxh3l7d18.webp?v=1794295304"},{"product_id":"true-tbb-2-hc-58-7-8-two-door-solid-back-bar-cooler-black-2-half-barrels-115v","title":"True TBB-2-HC 58-7\/8\" Two-Door Solid Back Bar Cooler — Black, 2 Half-Barrels, 115V","description":"\u003cp\u003eTwo solid, locking doors on a 58-7\/8\" black cabinet hide two half-barrels or 88 six-packs from view. The True TBB-2-HC is the back bar cooler for operators who want stock kept cold and out of sight, with a stainless steel countertop for working space above it.\u003c\/p\u003e\u003cp\u003eThe 1\/4 HP R290 hydrocarbon system holds 33°F to 38°F, and ECM evaporator and condenser fan motors keep air moving evenly through the cabinet. The condensing unit sits behind the front grill and slides out for cleaning, so service happens without pulling the cooler away from the wall. Inside are four black PVC-coated wire shelves, two 32\" long on the left and two 20-3\/4\" on the right, adjustable on 1\/2\" increments, plus LED lighting and a stainless floor with a 1\/2\" reinforced lip. The doors are black powder-coated over galvanized liners, with 12\" recessed handles, one-piece magnetic gaskets and standard locks.\u003c\/p\u003e\u003cp\u003eThe cabinet is 58-7\/8\" W x 27-3\/4\" D x 37\" H and weighs 360 pounds. It runs on 115V at 2.8 amps through a 7 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Legs, castors, TrueTrac bottle organizers, wine racks and wine or chocolate thermostats are factory options. NSF\/ANSI 7 compliant for packaged and bottled product, and True warrants it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979266490526,"sku":"TRU-TBB-2-HC","price":4664.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/o3qtikul59tq9r4xcz2m.webp?v=1794295305"},{"product_id":"true-tbb-2-s-hc-58-7-8-two-door-solid-back-bar-cooler-stainless-2-half-barrels-115v","title":"True TBB-2-S-HC 58-7\/8\" Two-Door Solid Back Bar Cooler — Stainless, 2 Half-Barrels, 115V","description":"\u003cp\u003eStainless steel exterior, top and doors give the True TBB-2-S-HC a finished look on an open bar, while its two solid doors keep two half-barrels or 88 six-packs out of sight. It is the 58-7\/8\" solid-door cooler for stainless bar builds.\u003c\/p\u003e\u003cp\u003eThe refrigeration system holds the cabinet at 33°F to 38°F on R290 hydrocarbon refrigerant, with a 1\/4 HP compressor. The condensing unit slides out from behind the front grill for cleaning and service. Inside, the floor is 300-series stainless steel with a 1\/2\" lip, the walls are galvanized steel, and four heavy-duty black PVC-coated wire shelves, two 32\" long on the left and two 20-3\/4\" on the right, adjust on 1\/2\" increments. The doors have stainless exteriors over heavy-gauge galvanized liners, 12\" recessed handles locked in with a metal interlock, one-piece magnetic gaskets that come off without tools, and standard locks. A door threshold protector and an epoxy-coated evaporator round it out, and the back is matching aluminum.\u003c\/p\u003e\u003cp\u003eDimensions are 58-7\/8\" W x 27-3\/4\" D x 37\" H, and weight is 385 pounds. It draws 2.8 amps on 115V with a 7 ft cord and NEMA 5-15P plug, wired for a 15-amp connection. Legs, castors, TrueTrac bottle organizers, wine racks and extra shelves are factory options. The cooler is NSF\/ANSI 7 compliant for packaged and bottled product, and True backs it with 7 years parts, 7 years labor and 7 years compressor coverage.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979266719902,"sku":"TRU-TBB-2-S-HC","price":6003.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ywu5vlevsdrplv111g37.webp?v=1794295308"},{"product_id":"true-tbb-3-hc-69-1-8-two-door-solid-back-bar-cooler-black-3-half-barrels-115v","title":"True TBB-3-HC 69-1\/8\" Two-Door Solid Back Bar Cooler — Black, 3 Half-Barrels, 115V","description":"\u003cp\u003eThree half-barrels behind just two solid doors: the True TBB-3-HC stretches to 69-1\/8\" so a busy draft bar can keep an extra keg on hand without adding a third door to open and close. Switch to packaged beer and it holds 112 six-packs.\u003c\/p\u003e\u003cp\u003eThe 1\/4 HP R290 hydrocarbon system with ECM evaporator and condenser fan motors holds 33°F to 38°F, and the condensing unit slides out from behind the front grill for service. Both the cabinet and the solid doors are foamed in place with high-density polyurethane, which keeps the cold in when the doors stay shut most of the shift. Four black PVC-coated wire shelves, 32\" and 31-3\/4\" long and 21-1\/4\" deep, adjust on 1\/2\" increments. The doors carry black powder-coated exteriors, 12\" recessed handles, one-piece magnetic gaskets and standard locks, and the black powder-coated cabinet has a stainless steel countertop and LED lighting inside.\u003c\/p\u003e\u003cp\u003eThe cooler measures 69-1\/8\" W x 27-3\/4\" D x 37\" H and weighs 420 pounds. It draws 2.8 amps on 115V through a 7 ft cord and NEMA 5-15P plug and is wired for a dedicated 15-amp outlet. Legs, castors, TrueTrac bottle organizers, a left-door wine rack and wine or chocolate thermostats are factory options. NSF\/ANSI 7 compliant for packaged and bottled product, with True's 7 years parts, 7 years labor and 7 years compressor warranty.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267047582,"sku":"TRU-TBB-3-HC","price":5323.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/a1kk5kv56wijlx0in9pf.webp?v=1794295311"},{"product_id":"true-tbb-3-s-hc-69-1-8-two-door-solid-back-bar-cooler-stainless-3-half-barrels-115v","title":"True TBB-3-S-HC 69-1\/8\" Two-Door Solid Back Bar Cooler — Stainless, 3 Half-Barrels, 115V","description":"\u003cp\u003eHidden behind two stainless solid doors, the True TBB-3-S-HC keeps three half-barrels or 112 six-packs in a 69-1\/8\" cabinet that matches a stainless bar from end to end.\u003c\/p\u003e\u003cp\u003eA 1\/4 HP R290 hydrocarbon system with ECM evaporator and condenser fan motors holds 33°F to 38°F, and the epoxy-coated evaporator resists corrosion. The condensing unit slides out from behind the front grill, so service never means pulling the cooler from its spot. The cabinet and solid doors are foamed in place with high-density polyurethane. Each door has a stainless exterior over a heavy-gauge galvanized liner, a 12\" recessed handle anchored by a sheet-metal interlock, a positive seal and a standard lock. Four black PVC-coated wire shelves, 21-1\/4\" deep, adjust on 1\/2\" increments, and the stainless floor has a 1\/2\" reinforced lip. LED lighting is built in, and the back is matching aluminum.\u003c\/p\u003e\u003cp\u003ePlan for 69-1\/8\" W x 27-3\/4\" D x 37\" H and 415 pounds. It runs on 115V at 2.8 amps with a 7 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Legs, castors, TrueTrac bottle organizers, a left-door wine rack and wine or chocolate thermostats are factory options. NSF\/ANSI 7 compliant for packaged and bottled product, and covered by True for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267113118,"sku":"TRU-TBB-3-S-HC","price":6341.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/z3ban1lddhn5hcsnjdpg.webp?v=1794295314"},{"product_id":"true-tbb-4-hc-90-3-8-three-door-solid-back-bar-cooler-black-4-half-barrels-115v","title":"True TBB-4-HC 90-3\/8\" Three-Door Solid Back Bar Cooler — Black, 4 Half-Barrels, 115V","description":"\u003cp\u003eFour half-barrels or 152 six-packs fit behind three solid doors in the True TBB-4-HC, a 90-3\/8\" black back bar cooler built to store a serious draft and packaged-beer inventory out of sight.\u003c\/p\u003e\u003cp\u003eSix black PVC-coated wire shelves, two per section, are 21-1\/4\" deep and adjust on 1\/2\" increments. The 1\/4 HP R290 hydrocarbon system with ECM evaporator and condenser fan motors holds 33°F to 38°F across all three sections, and the condensing unit slides out from behind the front grill for cleaning. The cabinet and doors are foamed in place, and each door has a 12\" recessed handle, a one-piece magnetic gasket and a standard lock. Inside, LED lighting and a stainless steel floor with a 1\/2\" reinforced lip make loading kegs easier. The exterior is black powder-coated steel with a stainless countertop.\u003c\/p\u003e\u003cp\u003eThe footprint is 90-3\/8\" W x 27-3\/4\" D x 37\" H, and the cooler weighs 525 pounds. It still runs on 115V at 2.8 amps through a 7 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Legs, castors, TrueTrac bottle organizers, wine racks and wine or chocolate thermostats are factory options. NSF\/ANSI 7 compliant for packaged and bottled product, with True's 7 years parts, 7 years labor and 7 years compressor warranty.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267244190,"sku":"TRU-TBB-4-HC","price":5485.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/zimd2ixuxpc3sc1bs4qx.webp?v=1794295316"},{"product_id":"true-tbb-4-s-hc-90-3-8-three-door-solid-back-bar-cooler-stainless-4-half-barrels-115v","title":"True TBB-4-S-HC 90-3\/8\" Three-Door Solid Back Bar Cooler — Stainless, 4 Half-Barrels, 115V","description":"\u003cp\u003eThe largest stainless solid-door back bar cooler in this group, the True TBB-4-S-HC spans 90-3\/8\" behind three doors and holds four half-barrels or 152 six-packs, enough to keep a full draft lineup and backup stock cold below the bar.\u003c\/p\u003e\u003cp\u003eSix adjustable shelves divide the cabinet, two behind each door, and the system runs on R290 hydrocarbon refrigerant with a 1\/4 HP compressor. The stainless exterior suits a stainless bar build, and the solid doors keep kegs and cases out of guests' sight.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 90-3\/8\" W x 27-3\/4\" D x 37\" H and weighs 530 pounds. It runs on 115V at 2.8 amps through a 7 ft cord and NEMA 5-15P plug, factory pre-wired with the cord and plug included. True backs it with 7 years parts, 7 years labor and 7 years compressor coverage.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267440798,"sku":"TRU-TBB-4-S-HC","price":7772.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/fzfpuugsz1zdc9xpbksh.webp?v=1794295319"},{"product_id":"true-tbb-4pt-hc-90-3-8-pass-thru-solid-door-back-bar-cooler-black-3-front-3-rear-doors","title":"True TBB-4PT-HC 90-3\/8\" Pass-Thru Solid Door Back Bar Cooler — Black, 3 Front \/ 3 Rear Doors","description":"\u003cp\u003eThree solid doors in front and three more in back let the True TBB-4PT-HC sit between your bar and your back of house, so staff restock from one side while bartenders pull from the other. It holds four half-barrels or 152 six-packs in a 90-3\/8\" cabinet.\u003c\/p\u003e\u003cp\u003eAn extra-large evaporator coil, balanced with a higher-horsepower compressor and a large condenser, holds 33°F to 38°F on R290 hydrocarbon refrigerant, which matters in a cabinet that gets opened from both sides all shift. True's self-cleaning RCU condenser takes coil cleaning off the list, and the condensing unit slides out from behind the front grill for service. Six black PVC-coated wire shelves, 23-1\/2\" long on the ends and 28-1\/4\" in the center section, adjust on 1\/2\" increments. The cabinet and solid doors are foamed in place, each door has a 12\" recessed handle, a magnetic gasket that comes off without tools and a standard lock, and LED lighting brightens the interior. The exterior is black powder-coated steel with a stainless steel countertop.\u003c\/p\u003e\u003cp\u003eFootprint is 90-3\/8\" W x 31\" D x 37\" H, and the cooler weighs 565 pounds. It draws 2.9 amps on 115V through a 10 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Legs, castors and wine racks are factory options. NSF\/ANSI 7 compliant for packaged and bottled product, and True warrants it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267539102,"sku":"TRU-TBB-4PT-HC","price":8399.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ij4ifsthq04hsoh2o9xn.webp?v=1794295320"},{"product_id":"true-tbb-4pt-s-hc-90-3-8-pass-thru-solid-door-back-bar-cooler-stainless-3-front-3-rear-doors","title":"True TBB-4PT-S-HC 90-3\/8\" Pass-Thru Solid Door Back Bar Cooler — Stainless, 3 Front \/ 3 Rear Doors","description":"\u003cp\u003eFinished in stainless on the front, back, sides and countertop, the True TBB-4PT-S-HC is a pass-thru that looks finished from both sides, which matters when the rear faces a hallway, an open kitchen or a second bar. Three solid doors on each face open on four half-barrels or 152 six-packs.\u003c\/p\u003e\u003cp\u003eOn R290 hydrocarbon refrigerant, an extra-large evaporator coil matched with a higher-horsepower compressor and a large condenser holds 33°F to 38°F even with traffic on both sides. The RCU condenser is self-cleaning, and the condensing unit slides out from behind the front grill. Six black PVC-coated wire shelves adjust on 1\/2\" increments, 23-1\/2\" long in the end sections and 28-1\/4\" in the center. The doors are stainless over heavy-gauge galvanized liners, foamed in place, with 12\" recessed handles, tool-free magnetic gaskets and standard locks, and LED lighting runs inside.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 90-3\/8\" W x 31\" D x 37\" H and weighs 545 pounds. It runs on 115V at 2.9 amps through a 10 ft cord with a NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Legs, castors and wine racks are factory options. It is NSF\/ANSI 7 compliant for packaged and bottled product, with True's 7 years parts, 7 years labor and 7 years compressor warranty.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979267735710,"sku":"TRU-TBB-4PT-S-HC","price":10585.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/osylxzkgasyfyz6mnrc0.webp?v=1794295322"},{"product_id":"true-tbb24-48-2g-z1-bst-s-1-48-two-door-back-bar-cooler-24-deep-sub-top-115v","title":"True TBB24-48-2G-Z1-BST-S-1 48\" Two-Door Back Bar Cooler — 24\" Deep, Sub Top, 115V","description":"\u003cp\u003eAt 24-7\/8\" deep and 34-1\/4\" high, the True TBB24-48-2G-Z1-BST-S-1 is a shallow 48\" back bar cooler with a sub top, made to sit under your own bar top or millwork. It holds 76 six-packs of 12 oz cans or six sixth-barrels.\u003c\/p\u003e\u003cp\u003eTwo doors open on four adjustable shelves, and the self-contained system runs on R290 hydrocarbon refrigerant. The shallow cabinet keeps the aisle behind the bar wider than a standard-depth cooler would.\u003c\/p\u003e\u003cp\u003eThe footprint is 48-1\/8\" W x 24-7\/8\" D x 34-1\/4\" H, and the unit weighs 290 pounds. It runs on 115V at 1.8 amps through a 10 ft cord and NEMA 5-15P plug, factory pre-wired with the cord and plug included. True backs it with 7 years parts, 7 years labor and 7 years compressor coverage.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979268817054,"sku":"TRU-TBB24-48-2G-Z1-BST-S-1","price":6442.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/476438401123fa5a300adb563215001c7be08533.webp?v=1794295325"},{"product_id":"true-tbb24-48-2g-z1-sft-b-1-48-two-door-back-bar-cooler-24-deep-finished-top-115v","title":"True TBB24-48-2G-Z1-SFT-B-1 48\" Two-Door Back Bar Cooler — 24\" Deep, Finished Top, 115V","description":"\u003cp\u003eA finished top makes the True TBB24-48-2G-Z1-SFT-B-1 a freestanding shallow-depth cooler you can work on directly, with no bar top built over it. It is 48-1\/8\" wide and only 24-7\/8\" deep, and it stores 76 six-packs or six sixth-barrels.\u003c\/p\u003e\u003cp\u003eFour adjustable shelves sit behind two doors, and the self-contained refrigeration runs on R290 hydrocarbon refrigerant. At 34-3\/4\" tall, it lands at a comfortable working height for setting down glassware or a tablet POS.\u003c\/p\u003e\u003cp\u003ePlan for 48-1\/8\" W x 24-7\/8\" D x 34-3\/4\" H and 290 pounds. It draws 1.8 amps at 115V through a 10 ft cord and NEMA 5-15P plug, factory pre-wired with cord and plug included. True warrants it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979269734558,"sku":"TRU-TBB24-48-2G-Z1-SFT-B-1","price":5748.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/wzsdyfw4qwdlox31gaqp.webp?v=1794295328"},{"product_id":"true-tbb24-48-2s-z1-bst-b-1-48-two-door-solid-back-bar-cooler-24-deep-black-sub-top","title":"True TBB24-48-2S-Z1-BST-B-1 48\" Two-Door Solid Back Bar Cooler — 24\" Deep, Black Sub Top","description":"\u003cp\u003eSolid doors, a black exterior and a black sub top let the True TBB24-48-2S-Z1-BST-B-1 vanish under a dark bar top while keeping six sixth-barrels or 76 six-packs cold and out of sight. It is only 24-7\/8\" deep, so the aisle behind the bar stays open.\u003c\/p\u003e\u003cp\u003eForced-air R290 hydrocarbon refrigeration holds product at 35°F under an electronic control, and True's self-cleaning RCU condenser removes coil brushing from your closing routine. The solid doors have galvanized steel liners, 12\" recessed handles foamed in place with a sheet-metal interlock, positive seals and standard locks. Inside, four gray PVC-coated wire shelves, 15-1\/2\" by 18\", adjust on 1\/2\" increments over a stainless steel floor, with galvanized steel walls and LED lighting. The base comes with leg levelers.\u003c\/p\u003e\u003cp\u003eThe cooler measures 48-1\/8\" W x 24-7\/8\" D x 34-1\/4\" H and weighs 290 pounds. It draws 1.8 amps on 115V through a 10 ft cord and NEMA 5-15P plug and is wired for a dedicated 15-amp outlet. Castors, legs, extra shelves and bottle organizers are factory options. NSF\/ANSI 7 compliant for packaged and bottled product and UL approved for outdoor use, with True coverage of 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979271733406,"sku":"TRU-TBB24-48-2S-Z1-BST-B-1","price":5088.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/tthxxyhjormgxa5kwzzy.webp?v=1794295330"},{"product_id":"true-tbb24-48-2s-z1-bst-s-1-48-two-door-solid-back-bar-cooler-stainless-black-sub-top","title":"True TBB24-48-2S-Z1-BST-S-1 48\" Two-Door Solid Back Bar Cooler — Stainless, Black Sub Top","description":"\u003cp\u003eStainless outside with a black sub top, the True TBB24-48-2S-Z1-BST-S-1 slides under a custom bar top while showing stainless to your staff and guests. Behind two solid, locking doors it keeps six sixth-barrels or 76 six-packs cold in a cabinet only 24-7\/8\" deep.\u003c\/p\u003e\u003cp\u003eProduct holds at 35°F on a forced-air R290 hydrocarbon system run by an electronic control, and the self-cleaning RCU condenser keeps the system efficient with no coil brushing. Each solid door has a galvanized steel liner, a 12\" recessed handle foamed in place with a sheet-metal interlock and a positive seal, and locks come standard. Four gray PVC-coated wire shelves adjust on 1\/2\" increments over a stainless steel floor, LED lighting runs inside, and leg levelers come on the base.\u003c\/p\u003e\u003cp\u003ePlan for 48-1\/8\" W x 24-7\/8\" D x 34-1\/4\" H and 290 pounds. It runs on 115V at 1.8 amps through a 10 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Castors, legs, additional shelves and bottle organizers are factory options. It is NSF\/ANSI 7 compliant for packaged and bottled product and UL approved for outdoor use, and True warrants it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979272028318,"sku":"TRU-TBB24-48-2S-Z1-BST-S-1","price":6080.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/srt07mmuq2wdod6hcixl.webp?v=1794295332"},{"product_id":"true-tbb24-48-2s-z1-sft-b-1-48-two-door-solid-back-bar-cooler-24-deep-finished-top","title":"True TBB24-48-2S-Z1-SFT-B-1 48\" Two-Door Solid Back Bar Cooler — 24\" Deep, Finished Top","description":"\u003cp\u003eTwo solid swing doors and a finished top on a shallow 48\" cabinet: the True TBB24-48-2S-Z1-SFT-B-1 is a freestanding back bar cooler you can work on, holding six sixth-barrels or 76 six-packs out of sight.\u003c\/p\u003e\u003cp\u003eFour adjustable shelves sit behind the solid doors, and the self-contained refrigeration runs on R290 hydrocarbon refrigerant. At 24-7\/8\" deep, the cabinet leaves more aisle behind the bar than a standard-depth cooler, and at 34-3\/4\" tall the top sits at working height.\u003c\/p\u003e\u003cp\u003eThe unit measures 48-1\/8\" W x 24-7\/8\" D x 34-3\/4\" H and weighs 290 pounds. It draws 1.8 amps at 115V with a 10 ft cord and NEMA 5-15P plug, factory pre-wired with cord and plug included. True covers it for 7 years parts, 7 years labor and 7 years compressor.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979273207966,"sku":"TRU-TBB24-48-2S-Z1-SFT-B-1","price":5305.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ss1ushvwgvlxspojr0lt.webp?v=1794295334"},{"product_id":"true-tbb24-48-2s-z1-sft-s-1-48-two-door-solid-back-bar-cooler-stainless-finished-top","title":"True TBB24-48-2S-Z1-SFT-S-1 48\" Two-Door Solid Back Bar Cooler — Stainless, Finished Top","description":"\u003cp\u003eStainless exterior, a stainless steel countertop and two solid locking doors make the True TBB24-48-2S-Z1-SFT-S-1 a freestanding, finished back bar cooler in just 24-7\/8\" of depth. It keeps six sixth-barrels or 76 six-packs cold and hidden while the top works as counter space.\u003c\/p\u003e\u003cp\u003eA forced-air R290 hydrocarbon system holds product at 35°F under an electronic control, and True's self-cleaning RCU condenser handles the coil cleaning. The solid doors have galvanized steel liners, 12\" recessed handles foamed in place with a sheet-metal interlock, positive seals and standard locks. Inside are four gray PVC-coated wire shelves on 1\/2\" adjustment, a stainless steel floor, galvanized walls and LED lighting. Leg levelers are fitted to the base, and UL approval for outdoor use lets it work on a patio.\u003c\/p\u003e\u003cp\u003eFootprint is 48-1\/8\" W x 24-7\/8\" D x 34-3\/4\" H, and weight is 290 pounds. It draws 1.8 amps on 115V with a 10 ft cord and NEMA 5-15P plug, wired for a dedicated 15-amp outlet. Castors, legs, additional shelves and bottle organizers are factory options. NSF\/ANSI 7 compliant for packaged and bottled product and UL approved for outdoor use, with True's 7 years parts, 7 years labor and 7 years compressor warranty.\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979274649758,"sku":"TRU-TBB24-48-2S-Z1-SFT-S-1","price":6760.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/3a7c915b9769239714e37a8cc7c5804979657ed1.webp?v=1794295335"},{"product_id":"true-tbb24-60-2g-z1-bst-s-1-60-two-door-solid-swing-door-back-bar-cooler-115v-2-half-barrels","title":"True TBB24-60-2G-Z1-BST-S-1 60\" Two-Door Solid Swing Door Back Bar Cooler — 115V, 2 Half Barrels","description":"\u003cp\u003eTwo half barrels or 89 six-packs of 12 oz cans fit behind the two doors of this 60-inch back bar cooler, and the cabinet stands just 34-1\/4\" tall so it tucks under a standard back bar counter. The True TBB24-60-2G-Z1-BST-S-1 is the cold storage your bartenders reach into all night: bottled beer, mixers, juices and garnish backups kept one step behind the rail.\u003c\/p\u003e\u003cp\u003eRefrigeration runs on R290 hydrocarbon refrigerant in a self-contained cabinet, so there is no remote condenser to plan for. Four shelves split the interior between the two solid swing doors, giving you room to keep packaged beer on one side and mixers or wine on the other, and the 24-7\/8\" depth leaves space for a full keg or cases stacked two deep.\u003c\/p\u003e\u003cp\u003eThe footprint is 60-1\/8\" wide, 24-7\/8\" deep and 34-1\/4\" high, and the unit weighs 290 pounds. It arrives pre-wired from the factory for a 115\/60\/1, 15-amp supply, with the cord and NEMA 5-15P plug included on a 10-foot cord, and it draws 3.2 amps. True backs it with 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979317575838,"sku":"TRU-TBB24-60-2G-Z1-BST-S-1","price":7248.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/4175eded48a6fa9b479469e6c73031e69894444c.webp?v=1794295582"},{"product_id":"true-tbb24-60-2s-z1-bst-b-1-60-two-door-solid-door-back-bar-cooler-all-black-35-f","title":"True TBB24-60-2S-Z1-BST-B-1 60\" Two-Door Solid Door Back Bar Cooler — All Black, 35°F","description":"\u003cp\u003eBlack powder-coated steel on every visible face, including the sub top, so this 60-inch back bar cooler disappears into a dark wood or matte-black bar instead of flashing stainless at your guests. The True TBB24-60-2S-Z1-BST-B-1 holds two half barrels or 89 six-packs of 12 oz cans behind two locking solid doors, right where the bartender works.\u003c\/p\u003e\u003cp\u003eA forced-air R290 system holds product at 35°F, and True's self-cleaning RCU technology keeps the condenser coil clear on its own, which cuts energy draw and keeps the box cold on a packed Saturday. Electronic control sets the temperature, LED lighting shows every label, and four gray PVC-coated wire shelves, each 21-11\/16\" wide by 18\" deep, adjust on 1\/2\" increments along aluminum pilasters. The interior pairs a stainless steel floor with heavy-gauge galvanized walls, and the foamed-in-place polyurethane insulation has zero ozone depletion and zero global warming potential. The black sub top is meant to sit beneath a bar countertop you finish to match the room.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 60-1\/8\" wide, 24-7\/8\" deep and 34-1\/4\" high, weighs 345 pounds and sits on leg levelers. It comes pre-wired for a dedicated 115V, 15-amp outlet with a 10-foot cord and NEMA 5-15P plug, drawing 3.2 amps. It is NSF\/ANSI 7 compliant for packaged or bottled product, UL approved for outdoor use, and covered by 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979318526110,"sku":"TRU-TBB24-60-2S-Z1-BST-B-1","price":5693.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/lwbajked8b90xhwodqfk.webp?v=1794295598"},{"product_id":"true-tbb24-60-2s-z1-bst-s-1-60-two-door-solid-door-back-bar-cooler-stainless-black-sub-top","title":"True TBB24-60-2S-Z1-BST-S-1 60\" Two-Door Solid Door Back Bar Cooler — Stainless, Black Sub Top","description":"\u003cp\u003eStainless steel doors and front facing the bartender, with a black sub top ready for the countertop you choose. The True TBB24-60-2S-Z1-BST-S-1 gives a busy bar a front that shrugs off spilled syrup and bumped bottles, while still letting you finish the top in wood, quartz or whatever material matches the room.\u003c\/p\u003e\u003cp\u003eInside, a forced-air R290 refrigeration system holds product at 35°F under electronic control. True's self-cleaning RCU technology handles the condenser coil for you, keeping energy use down and the cabinet cold during a long service. Two half barrels or 89 six-packs of 12 oz cans fit on the stainless steel floor and four PVC-coated wire shelves, each 21-11\/16\" by 18\", adjustable in 1\/2\" steps. LED lighting lights the interior, the galvanized door liners close against positive-seal gaskets, and every door locks.\u003c\/p\u003e\u003cp\u003ePlan for 60-1\/8\" of width, 24-7\/8\" of depth and 34-1\/4\" of height; the 345-pound cabinet stands on leg levelers. It runs on a dedicated 115V, 15-amp outlet through the supplied 10-foot cord and NEMA 5-15P plug, at 3.2 amps. It is NSF\/ANSI 7 compliant for packaged or bottled product, UL approved for outdoor use, and backed by 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979319312542,"sku":"TRU-TBB24-60-2S-Z1-BST-S-1","price":6771.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/lki1d1iyuakpy8etv43j.webp?v=1794295616"},{"product_id":"true-tbb24-60-2s-z1-sft-b-1-60-two-door-back-bar-cooler-black-stainless-steel-top","title":"True TBB24-60-2S-Z1-SFT-B-1 60\" Two-Door Back Bar Cooler — Black, Stainless Steel Top","description":"\u003cp\u003eA finished stainless steel countertop comes on this one, so the cooler is a working surface the day it lands: set glassware, cut garnish or park a POS terminal right on top. The True TBB24-60-2S-Z1-SFT-B-1 pairs that top with a black powder-coated cabinet, giving a bar or bottle shop a clean dark front without any carpentry.\u003c\/p\u003e\u003cp\u003eBehind the two locking solid doors, a forced-air R290 system holds 35°F on electronic control, and True's self-cleaning RCU technology keeps the condenser coil clear so efficiency does not fade over time. You get room for two half barrels or 89 six-packs of 12 oz cans, four gray PVC-coated wire shelves at 21-11\/16\" wide and 18\" deep on 1\/2\" adjustment, LED interior lighting and a stainless steel floor inside heavy-gauge galvanized walls. Recessed 12-inch handles are foamed in with a sheet-metal interlock, so they stay put under constant use.\u003c\/p\u003e\u003cp\u003eWith the finished top, the cabinet stands 34-3\/4\" high on leg levelers, 60-1\/8\" wide and 24-7\/8\" deep, and weighs 345 pounds. Run it from a dedicated 115V, 15-amp outlet using the included 10-foot cord and NEMA 5-15P plug; it draws 3.2 amps. It is NSF\/ANSI 7 compliant for packaged or bottled product, UL approved for outdoor use, and carries 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979319869598,"sku":"TRU-TBB24-60-2S-Z1-SFT-B-1","price":5861.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/fr96f0ukphpwqevzga3n.webp?v=1794295635"},{"product_id":"true-tbb24-60-2s-z1-sft-s-1-60-two-door-stainless-back-bar-cooler-stainless-top-35-f","title":"True TBB24-60-2S-Z1-SFT-S-1 60\" Two-Door Stainless Back Bar Cooler — Stainless Top, 35°F","description":"\u003cp\u003eStainless steel from the countertop down to the door fronts makes this the 60-inch back bar cooler for bars where everything gets hosed, wiped and sanitized nightly. The True TBB24-60-2S-Z1-SFT-S-1 arrives with a finished stainless top, ready to take a speed rail's worth of bottles, glass racks or a blender station the moment it is leveled.\u003c\/p\u003e\u003cp\u003eRefrigeration is forced-air R290 on a capillary tube system, holding product at 35°F with electronic control. The self-cleaning RCU condenser from True removes the coil-cleaning step altogether and keeps energy use low. Load two half barrels or 89 six-packs of 12 oz cans across four adjustable PVC-coated wire shelves, each 21-11\/16\" by 18\", over a stainless steel floor. LED lighting, positive-seal doors, standard door locks and 12-inch recessed handles foamed into the doors round out the build.\u003c\/p\u003e\u003cp\u003eOverall size is 60-1\/8\" W x 24-7\/8\" D x 34-3\/4\" H with the stainless top, and the cabinet weighs 345 pounds on leg levelers. It is pre-wired for a dedicated 115V, 15-amp outlet, with a 10-foot cord and NEMA 5-15P plug, and draws 3.2 amps. It is NSF\/ANSI 7 compliant for packaged or bottled product, UL approved for outdoor use, and protected by 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979320950942,"sku":"TRU-TBB24-60-2S-Z1-SFT-S-1","price":7455.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/49e47727fa6f90aec51c81c7d573dbd2e5bfc918.webp?v=1794295647"},{"product_id":"true-tbb24-72-3g-z1-sft-b-1-72-three-door-solid-swing-door-back-bar-cooler-115v-3-half-barrels","title":"True TBB24-72-3G-Z1-SFT-B-1 72\" Three-Door Solid Swing Door Back Bar Cooler — 115V, 3 Half Barrels","description":"\u003cp\u003eThree half barrels, or 125 six-packs of 12 oz cans, behind three doors in a cabinet 72 inches long. The True TBB24-72-3G-Z1-SFT-B-1 is sized for the bar that runs out of cold beer before last call: one more door of storage than a 60-inch unit, so a third keg or a wall of cases stays chilled under the counter.\u003c\/p\u003e\u003cp\u003eThe system runs on R290 hydrocarbon refrigerant and is fully self-contained, with nothing to pipe or mount remotely. Six shelves divide the three sections so you can give packaged beer, mixers and wine each their own door and keep bartenders from crossing paths.\u003c\/p\u003e\u003cp\u003eThe cabinet is 72-1\/8\" wide, 24-7\/8\" deep and 34-3\/4\" high and weighs 415 pounds. It is factory pre-wired for a 115\/60\/1, 15-amp supply with cord and NEMA 5-15P plug included on a 10-foot cord, and draws 3.2 amps. Coverage is 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979322917022,"sku":"TRU-TBB24-72-3G-Z1-SFT-B-1","price":7635.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/ulbsssezndjzjnubo64w.webp?v=1794295660"},{"product_id":"true-tbb24-72-3s-z1-bst-b-1-72-three-door-solid-swing-door-back-bar-cooler-115v-6-shelves","title":"True TBB24-72-3S-Z1-BST-B-1 72\" Three-Door Solid Swing Door Back Bar Cooler — 115V, 6 Shelves","description":"\u003cp\u003eAt 34-1\/4\" tall and 72-1\/8\" long, this three-door cooler gives a long back bar six feet of cold storage under the counter line. The True TBB24-72-3S-Z1-BST-B-1 holds three half barrels or 125 six-packs of 12 oz cans, enough to keep a crowded room in cold beer without anyone running to the walk-in.\u003c\/p\u003e\u003cp\u003eIt is a self-contained cabinet refrigerated with R290 hydrocarbon refrigerant. Three solid swing doors open onto six shelves, so each bartender station can own a door and the rest of the stock stays sealed and cold while one is open.\u003c\/p\u003e\u003cp\u003eFootprint is 72-1\/8\" W x 24-7\/8\" D x 34-1\/4\" H at 415 pounds. The unit comes pre-wired from the factory for a 115\/60\/1, 15-amp supply, with a 10-foot cord and NEMA 5-15P plug included, and draws 3.2 amps. True covers it with 7 years parts, 7 years labor, 7 years compressor (True USA \u0026amp; Canada foodservice warranty).\u003c\/p\u003e","brand":"True","offers":[{"title":"Default Title","offer_id":67979323408542,"sku":"TRU-TBB24-72-3S-Z1-BST-B-1","price":6515.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/e1wql4qia5nxjexgnk6w.webp?v=1794295675"}],"url":"https:\/\/directfoodequipment.com\/collections\/back-bar-solid-refrigerators.oembed","provider":"Direct Food Equipment","version":"1.0","type":"link"}