{"title":"AccuTemp","description":"\u003cp\u003eAccuTemp is an American maker of steam-heated griddles, and this lineup covers AccuSteam gas griddles from twenty-four to forty-eight inches wide rated at forty-two thousand three hundred to eighty-five thousand BTU, plus matching electric models from nine point six to fourteen point two five kilowatts, each with a twenty-four or thirty inch deep plate. It also includes the XLR8 upper heated platen with its mounting brackets, leg stabilization kits and replacement sheets. Steam sealed under the plate holds the same surface temperature edge to edge, so a full load of burgers or pancakes cooks evenly in every zone. Quick service chains, diners and hotel breakfast lines get faster recovery and less waste during a rush. Compare \u003ca href=\"\/collections\/griddles\"\u003ecommercial griddles\u003c\/a\u003e and \u003ca href=\"\/collections\/griddle-accessories\"\u003egriddle accessories\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"accutemp-ggf1201a2450-t1-accusteam-24-gas-griddle-24-x-30-steam-heated-plate-42-300-btu-natural-gas","title":"AccuTemp GGF1201A2450-T1 AccuSteam 24\" Gas Griddle, 24\" x 30\" Steam-Heated Plate — 42,300 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201A2450-T1 is a 24-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 23-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 721 square inches with no dead corners and no hot spot over a burner. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 24 inches wide it is the narrowest AccuSteam, built for a line that has two feet to give and no more.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 42,300 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 5 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988442677406,"sku":"GBS-GGF1201A2450-T1","price":23381.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-ggf1201b2450-t1-accusteam-24-gas-griddle-24-x-24-steam-heated-plate-42-300-btu-natural-gas","title":"AccuTemp GGF1201B2450-T1 AccuSteam 24\" Gas Griddle, 24\" x 24\" Steam-Heated Plate — 42,300 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201B2450-T1 is a 24-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 23-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 578 square inches with no dead corners and no hot spot over a burner. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 24 inches wide it is the narrowest AccuSteam, built for a line that has two feet to give and no more.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 42,300 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 5 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7089-4 mounting bracket kit, and countertop installations also need the AT2A-6429-1 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988445757598,"sku":"GBS-GGF1201B2450-T1","price":22975.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-ggf1201a3650-t1-accusteam-36-gas-griddle-36-x-30-steam-heated-plate-65-000-btu-natural-gas","title":"AccuTemp GGF1201A3650-T1 AccuSteam 36\" Gas Griddle, 36\" x 30\" Steam-Heated Plate — 65,000 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201A3650-T1 is a 36-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 35-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,083 square inches with no dead corners and no hot spot over a burner. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 36 inches wide it is the three-foot workhorse width that most full-service and quick-service lines are built around.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 65,000 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988451098782,"sku":"GBS-GGF1201A3650-T1","price":25760.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-ggf1201b3650-t1-accusteam-36-gas-griddle-36-x-24-steam-heated-plate-65-000-btu-natural-gas","title":"AccuTemp GGF1201B3650-T1 AccuSteam 36\" Gas Griddle, 36\" x 24\" Steam-Heated Plate — 65,000 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201B3650-T1 is a 36-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 35-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 868 square inches with no dead corners and no hot spot over a burner. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 36 inches wide it is the three-foot workhorse width that most full-service and quick-service lines are built around.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 65,000 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7170-3 mounting bracket kit, and countertop installations also need the AT2A-6429-2 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988455030942,"sku":"GBS-GGF1201B3650-T1","price":24814.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-ggf1201a4850-t1-accusteam-48-gas-griddle-48-x-30-steam-heated-plate-85-000-btu-natural-gas","title":"AccuTemp GGF1201A4850-T1 AccuSteam 48\" Gas Griddle, 48\" x 30\" Steam-Heated Plate — 85,000 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201A4850-T1 is a 48-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 47-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,446 square inches with no dead corners and no hot spot over a burner. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 48 inches wide it is four feet of plate for kitchens where a single griddle carries most of the menu.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 85,000 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988465549470,"sku":"GBS-GGF1201A4850-T1","price":29217.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-ggf1201b4850-t1-accusteam-48-gas-griddle-48-x-24-steam-heated-plate-85-000-btu-natural-gas","title":"AccuTemp GGF1201B4850-T1 AccuSteam 48\" Gas Griddle, 48\" x 24\" Steam-Heated Plate — 85,000 BTU, Natural Gas","description":"\u003cp\u003eThe AccuTemp GGF1201B4850-T1 is a 48-inch countertop gas griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 47-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,158 square inches with no dead corners and no hot spot over a burner. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 48 inches wide it is four feet of plate for kitchens where a single griddle carries most of the menu.\u003c\/p\u003e\n\u003cp\u003eInfrared burners rated 85,000 BTU per hour fire into the steam chamber rather than straight into the plate, and the unit plugs into a standard 120V outlet for its controls on a 5-foot cord with a NEMA 5-15P plug. Gas connects through a 3\/4-inch NPT fitting with a 90-degree elbow supplied in the box. This model ships for natural gas; units going above 4,000 feet need the altitude specified at order.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7170-4 mounting bracket kit, and countertop installations also need the AT2A-6429-3 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988469153950,"sku":"GBS-GGF1201B4850-T1","price":27956.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-gas-griddle-ggf.jpg?v=1794376891"},{"product_id":"accutemp-egf2083a2450-t1-accusteam-24-electric-griddle-24-x-30-steam-heated-plate-9-6-kw-208v-3-phase","title":"AccuTemp EGF2083A2450-T1 AccuSteam 24\" Electric Griddle, 24\" x 30\" Steam-Heated Plate — 9.6 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083A2450-T1 is a 24-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 23-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 721 square inches with no dead corners and no hot spot over an element. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 24 inches wide it is the narrowest AccuSteam, built for a line that has two feet to give and no more.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 9.6 kW, drawn at 27 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 5 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988473839774,"sku":"GBS-EGF2083A2450-T1","price":21056.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-egf2083b2450-t1-accusteam-24-electric-griddle-24-x-24-steam-heated-plate-9-6-kw-208v-3-phase","title":"AccuTemp EGF2083B2450-T1 AccuSteam 24\" Electric Griddle, 24\" x 24\" Steam-Heated Plate — 9.6 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083B2450-T1 is a 24-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 23-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 578 square inches with no dead corners and no hot spot over an element. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 24 inches wide it is the narrowest AccuSteam, built for a line that has two feet to give and no more.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 9.6 kW, drawn at 27 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 5 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7089-1 mounting bracket kit, and countertop installations also need the AT2A-6429-1 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988477116574,"sku":"GBS-EGF2083B2450-T1","price":20444.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-egf2083a3650-t1-accusteam-36-electric-griddle-36-x-30-steam-heated-plate-14-25-kw-208v-3-phase","title":"AccuTemp EGF2083A3650-T1 AccuSteam 36\" Electric Griddle, 36\" x 30\" Steam-Heated Plate — 14.25 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083A3650-T1 is a 36-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 35-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,083 square inches with no dead corners and no hot spot over an element. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 36 inches wide it is the three-foot workhorse width that most full-service and quick-service lines are built around.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 14.25 kW, drawn at 40 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988481441950,"sku":"GBS-EGF2083A3650-T1","price":22734.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-egf2083b3650-t1-accusteam-36-electric-griddle-36-x-24-steam-heated-plate-14-25-kw-208v-3-phase","title":"AccuTemp EGF2083B3650-T1 AccuSteam 36\" Electric Griddle, 36\" x 24\" Steam-Heated Plate — 14.25 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083B3650-T1 is a 36-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 35-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 868 square inches with no dead corners and no hot spot over an element. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 36 inches wide it is the three-foot workhorse width that most full-service and quick-service lines are built around.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 14.25 kW, drawn at 40 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7170-1 mounting bracket kit, and countertop installations also need the AT2A-6429-2 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988484063390,"sku":"GBS-EGF2083B3650-T1","price":21820.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-egf2083a4850-t1-accusteam-48-electric-griddle-48-x-30-steam-heated-plate-14-25-kw-208v-3-phase","title":"AccuTemp EGF2083A4850-T1 AccuSteam 48\" Electric Griddle, 48\" x 30\" Steam-Heated Plate — 14.25 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083A4850-T1 is a 48-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 47-7\/8\" x 30-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,446 square inches with no dead corners and no hot spot over an element. The 30-inch-deep plate gives cooks more working room front to back than a standard 24-inch griddle, so product can be staged at the rear and finished at the front without crowding. At 48 inches wide it is four feet of plate for kitchens where a single griddle carries most of the menu.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 14.25 kW, drawn at 40 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988489535646,"sku":"GBS-EGF2083A4850-T1","price":25456.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-egf2083b4850-t1-accusteam-48-electric-griddle-48-x-24-steam-heated-plate-14-25-kw-208v-3-phase","title":"AccuTemp EGF2083B4850-T1 AccuSteam 48\" Electric Griddle, 48\" x 24\" Steam-Heated Plate — 14.25 kW, 208V 3-Phase","description":"\u003cp\u003eThe AccuTemp EGF2083B4850-T1 is a 48-inch countertop electric griddle that cooks on steam instead of direct heat. A hermetically sealed chamber under the 47-7\/8\" x 24-3\/16\" stainless cooking surface fills with steam, and steam condenses wherever the plate is coolest, so heat flows to the exact spot where cold product just landed. The result is a surface that holds within ±5°F edge to edge and recovers almost instantly, so the tenth burger on the plate cooks like the first and cooks can flip product back onto the same spot without waiting.\u003c\/p\u003e\n\u003cp\u003eThat evenness turns the whole plate into usable cooking area: 1,158 square inches with no dead corners and no hot spot over an element. The 24-inch-deep plate keeps the footprint shallow enough for a standard counter, and it is the depth AccuTemp builds the XLR8 upper heated platen to mount on. At 48 inches wide it is four feet of plate for kitchens where a single griddle carries most of the menu.\u003c\/p\u003e\n\u003cp\u003eTotal connected load is 14.25 kW, drawn at 40 amps on 208V three-phase through a 5-foot cord with a NEMA 15-50P plug. The heating elements sit inside the sealed chamber, immersed in distilled water that never needs to be topped up or replaced, and the low-watt-density design is built for long element life.\u003c\/p\u003e\n\u003cp\u003eControl is digital. Cooks set anything from 200°F to 400°F, and the controller can hold three preset temperatures, shows the actual surface temperature at a glance, and has a manager mode that locks the settings so the plate runs the way the kitchen manager set it. A heating indicator light and an over-temperature light sit on the control panel behind a control guard, with all controls serviceable from the front.\u003c\/p\u003e\n\u003cp\u003eThe plate is 7-gauge cold-rolled stainless steel with a 4-inch rear splash and side walls that taper from 4 inches to 1-5\/16 inches, set in a polished stainless body on 4-inch legs. A full-width 3-7\/8-inch front trough feeds a 6-1\/2 qt grease drawer. Because the steam chamber puts less radiant heat into the room than an open-burner plate, the line runs cooler and the HVAC system works less. The griddle is cULus listed, UL EPH certified to NSF\/ANSI 4, ENERGY STAR qualified and made in the USA, and it carries a one-year parts and labor warranty backed by AccuTemp's Lifetime Service and Support Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd an XLR8 upper heated platen.\u003c\/strong\u003e This 24-inch-deep model accepts AccuTemp's XLR8 upper heated platen arm, which cooks proteins from above and below at once. Mounting takes the AT2A-7170-2 mounting bracket kit, and countertop installations also need the AT2A-6429-3 leg stabilization kit; both are listed separately.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988491272350,"sku":"GBS-EGF2083B4850-T1","price":24230.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-accusteam-electric-griddle-egf.jpg?v=1794376913"},{"product_id":"accutemp-xlr82401b-00-xlr8-upper-heated-platen-for-24-deep-accusteam-griddles-208-240v-150-f-to-440-f","title":"AccuTemp XLR82401B-00 XLR8 Upper Heated Platen for 24\"-Deep AccuSteam Griddles — 208\/240V, 150°F to 440°F","description":"\u003cp\u003eThe AccuTemp XLR8 is an electric upper heated platen arm that mounts over a 24-inch-deep AccuSteam griddle and cooks from the top while the steam-heated plate cooks from the bottom. Proteins that would normally be cooked on one side, flipped and cooked again finish in a single pass, and AccuTemp reports cook times cut in half or better. In one quick-service test, frozen quarter-pound patties went from a 4-minute cook to 1 minute 20 seconds.\u003c\/p\u003e\n\u003cp\u003eThe platen covers an 11.6\" x 23.6\" zone, close to a full one-foot section of the griddle front to back, and uses AccuTemp's proprietary electric heating technology to hold its setpoint within ±10°F with near-instant recovery. Digital controls set the platen from 150°F to 440°F, and two dual-stage timers with automatic timing take the guesswork out of when to lift. A single-hand lift mechanism has positive detents at the top and bottom of its travel, an easy gap adjuster sets the platen height for the product, and magnetic hold-down handles keep the release sheet in place.\u003c\/p\u003e\n\u003cp\u003eThe arm is built entirely of stainless steel. It runs on 208V or 240V single phase, drawing 10 A (2.1 kW) at 208V or 11.2 A (2.7 kW) at 240V, on its own 15-amp branch circuit through a 6-foot cord with a NEMA L6-30P plug; each arm needs its own receptacle. Five Teflon sheets come in the box, and replacements are sold in 10-packs (AT0H-5661-5).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you need to install it.\u003c\/strong\u003e The XLR8 fits any natural gas or electric AccuSteam griddle with a 24-inch cooking depth (the \"B\" depth models). Every installation needs the mounting bracket kit for the griddle's width and fuel (24\", 36\" or 48\"; gas kits include a flue draft diverter, electric kits a grease shield and clips), and the bracket lets you place an arm every 12 inches, so a 48-inch griddle can carry up to four. Countertop installations also need the leg stabilization kit for the griddle's width. The platen is UL EPH classified to NSF\/ANSI 4, made in the USA and covered by a one-year parts and labor warranty.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988492714142,"sku":"GBS-XLR82401B-00","price":17781.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-upper-heated-platen-on-griddle.jpg?v=1794376916"},{"product_id":"accutemp-at2a-6429-1-leg-stabilization-kit-for-24-accusteam-griddles-required-for-xlr8-platen-countertop-installs","title":"AccuTemp AT2A-6429-1 Leg Stabilization Kit for 24\" AccuSteam Griddles — Required for XLR8 Platen Countertop Installs","description":"\u003cp\u003eThe AccuTemp AT2A-6429-1 leg stabilization kit braces the legs of a 24-inch AccuSteam griddle so it stays planted on the counter once XLR8 upper heated platen arms are mounted to it. AccuTemp requires this kit on every countertop installation that carries XLR8 arms.\u003c\/p\u003e\n\u003cp\u003eThe kit is sized to the 24-inch griddle width and works with both gas and electric 24-inch-deep AccuSteam griddles. Order it together with the XLR8 arm (XLR82401B-00) and the matching mounting bracket kit: AT2A-7089-4 for a 24-inch gas griddle or AT2A-7089-1 for a 24-inch electric griddle.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988496580766,"sku":"GBS-AT2A-6429-1","price":538.71,"currency_code":"CAD","in_stock":true}]},{"product_id":"accutemp-at2a-6429-2-leg-stabilization-kit-for-36-accusteam-griddles-required-for-xlr8-platen-countertop-installs","title":"AccuTemp AT2A-6429-2 Leg Stabilization Kit for 36\" AccuSteam Griddles — Required for XLR8 Platen Countertop Installs","description":"\u003cp\u003eThe AccuTemp AT2A-6429-2 leg stabilization kit braces the legs of a 36-inch AccuSteam griddle so it stays planted on the counter once XLR8 upper heated platen arms are mounted to it. AccuTemp requires this kit on every countertop installation that carries XLR8 arms.\u003c\/p\u003e\n\u003cp\u003eThe kit is sized to the 36-inch griddle width and works with both gas and electric 24-inch-deep AccuSteam griddles. Order it together with the XLR8 arm (XLR82401B-00) and the matching mounting bracket kit: AT2A-7170-3 for a 36-inch gas griddle or AT2A-7170-1 for a 36-inch electric griddle.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988496679070,"sku":"GBS-AT2A-6429-2","price":574.85,"currency_code":"CAD","in_stock":true}]},{"product_id":"accutemp-at2a-6429-3-leg-stabilization-kit-for-48-accusteam-griddles-required-for-xlr8-platen-countertop-installs","title":"AccuTemp AT2A-6429-3 Leg Stabilization Kit for 48\" AccuSteam Griddles — Required for XLR8 Platen Countertop Installs","description":"\u003cp\u003eThe AccuTemp AT2A-6429-3 leg stabilization kit braces the legs of a 48-inch AccuSteam griddle so it stays planted on the counter once XLR8 upper heated platen arms are mounted to it. AccuTemp requires this kit on every countertop installation that carries XLR8 arms.\u003c\/p\u003e\n\u003cp\u003eThe kit is sized to the 48-inch griddle width and works with both gas and electric 24-inch-deep AccuSteam griddles. Order it together with the XLR8 arm (XLR82401B-00) and the matching mounting bracket kit: AT2A-7170-4 for a 48-inch gas griddle or AT2A-7170-2 for a 48-inch electric griddle.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988496711838,"sku":"GBS-AT2A-6429-3","price":612.12,"currency_code":"CAD","in_stock":true}]},{"product_id":"accutemp-at0h-5661-5-teflon-sheets-for-xlr8-upper-heated-platen-pack-of-10","title":"AccuTemp AT0H-5661-5 Teflon Sheets for XLR8 Upper Heated Platen — Pack of 10","description":"\u003cp\u003eThe AccuTemp AT0H-5661-5 is a 10-pack of replacement Teflon release sheets for the XLR8 upper heated platen. The sheet sits between the heated platen and the food, so burgers, chicken and breakfast proteins release cleanly when the platen lifts instead of tearing or sticking, and cleanup at close is a wipe of the sheet rather than a scrape of the platen.\u003c\/p\u003e\n\u003cp\u003eEach XLR8 arm ships with five sheets and holds its sheet in place with magnetic hold-down handles, so swapping in a fresh one takes seconds. Keeping a pack on the shelf means a torn or worn sheet is replaced at once instead of running the platen bare through service.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988499038366,"sku":"GBS-AT0H-5661-5","price":553.38,"currency_code":"CAD","in_stock":true}]},{"product_id":"accutemp-at2a-7089-4-xlr8-mounting-bracket-kit-for-24-x-24-gas-accusteam-griddles-up-to-2-platen-arms","title":"AccuTemp AT2A-7089-4 XLR8 Mounting Bracket Kit for 24\" x 24\" Gas AccuSteam Griddles — Up to 2 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7089-4 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 24-inch-wide, 24-inch-deep gas AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the gas model, coming with a flue draft diverter.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 24-inch kit carries up to 2 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits gas AccuSteam griddles with a 24-inch width and 24-inch cooking depth, including the AccuTemp GGF1201B2450-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-1 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988499234974,"sku":"GBS-AT2A-7089-4","price":1551.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"},{"product_id":"accutemp-at2a-7170-3-xlr8-mounting-bracket-kit-for-36-x-24-gas-accusteam-griddles-up-to-3-platen-arms","title":"AccuTemp AT2A-7170-3 XLR8 Mounting Bracket Kit for 36\" x 24\" Gas AccuSteam Griddles — Up to 3 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7170-3 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 36-inch-wide, 24-inch-deep gas AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the gas model, coming with a flue draft diverter.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 36-inch kit carries up to 3 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits gas AccuSteam griddles with a 36-inch width and 24-inch cooking depth, including the AccuTemp GGF1201B3650-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-2 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988506083486,"sku":"GBS-AT2A-7170-3","price":1685.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"},{"product_id":"accutemp-at2a-7170-4-xlr8-mounting-bracket-kit-for-48-x-24-gas-accusteam-griddles-up-to-4-platen-arms","title":"AccuTemp AT2A-7170-4 XLR8 Mounting Bracket Kit for 48\" x 24\" Gas AccuSteam Griddles — Up to 4 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7170-4 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 48-inch-wide, 24-inch-deep gas AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the gas model, coming with a flue draft diverter.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 48-inch kit carries up to 4 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits gas AccuSteam griddles with a 48-inch width and 24-inch cooking depth, including the AccuTemp GGF1201B4850-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-3 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988506312862,"sku":"GBS-AT2A-7170-4","price":1869.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"},{"product_id":"accutemp-at2a-7089-1-xlr8-mounting-bracket-kit-for-24-x-24-electric-accusteam-griddles-up-to-2-platen-arms","title":"AccuTemp AT2A-7089-1 XLR8 Mounting Bracket Kit for 24\" x 24\" Electric AccuSteam Griddles — Up to 2 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7089-1 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 24-inch-wide, 24-inch-deep electric AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the electric model, coming with a grease shield and clips.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 24-inch kit carries up to 2 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits electric AccuSteam griddles with a 24-inch width and 24-inch cooking depth, including the AccuTemp EGF2083B2450-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-1 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988506509470,"sku":"GBS-AT2A-7089-1","price":1252.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"},{"product_id":"accutemp-at2a-7170-1-xlr8-mounting-bracket-kit-for-36-x-24-electric-accusteam-griddles-up-to-3-platen-arms","title":"AccuTemp AT2A-7170-1 XLR8 Mounting Bracket Kit for 36\" x 24\" Electric AccuSteam Griddles — Up to 3 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7170-1 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 36-inch-wide, 24-inch-deep electric AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the electric model, coming with a grease shield and clips.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 36-inch kit carries up to 3 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits electric AccuSteam griddles with a 36-inch width and 24-inch cooking depth, including the AccuTemp EGF2083B3650-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-2 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988506542238,"sku":"GBS-AT2A-7170-1","price":1386.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"},{"product_id":"accutemp-at2a-7170-2-xlr8-mounting-bracket-kit-for-48-x-24-electric-accusteam-griddles-up-to-4-platen-arms","title":"AccuTemp AT2A-7170-2 XLR8 Mounting Bracket Kit for 48\" x 24\" Electric AccuSteam Griddles — Up to 4 Platen Arms","description":"\u003cp\u003eThe AccuTemp AT2A-7170-2 is the mounting bracket kit that attaches XLR8 upper heated platen arms to a 48-inch-wide, 24-inch-deep electric AccuSteam griddle. It is required for every XLR8 installation on this griddle, and it is sized and configured specifically for the electric model, coming with a grease shield and clips.\u003c\/p\u003e\n\u003cp\u003eThe bracket lets you mount an arm every 12 inches in any arrangement, so this 48-inch kit carries up to 4 XLR8 arms. That lets a kitchen start with one platen and add more as volume grows, or dedicate part of the griddle to platen cooking and keep the rest open for open-griddle items.\u003c\/p\u003e\n\u003cp\u003eFits electric AccuSteam griddles with a 48-inch width and 24-inch cooking depth, including the AccuTemp EGF2083B4850-T1. Pair it with the XLR82401B-00 arm and, on countertop installations, the AT2A-6429-3 leg stabilization kit.\u003c\/p\u003e","brand":"AccuTemp","offers":[{"title":"Default Title","offer_id":67988506575006,"sku":"GBS-AT2A-7170-2","price":1569.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/files\/accutemp-xlr8-mounting-bracket-kit-illustration.jpg?v=1794376917"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0460\/7390\/collections\/8407be7a-6092-42b3-a7af-5d3df5c3c280.png?v=1794347668","url":"https:\/\/directfoodequipment.com\/collections\/accutemp.oembed?page=2","provider":"Direct Food Equipment","version":"1.0","type":"link"}